Comparison Cyclone MP-7121 WRC vs Cyclone MP-7120 WRC

Clear Table
Add to comparison
	Cyclone MP-7121 WRC	Cyclone MP-7120 WRC
	Outdated Product	Outdated Product
all specs only differences
TOP sellers	Find prices on Amazon.uk Find prices on eBay.uk	Find prices on Amazon.uk Find prices on eBay.uk
Application area	car	car
DIN size	2DIN	2DIN
Short body
Media types	microSD USB storage (front) iPod/iPhone connection Android connection	microSD USB storage (front) iPod/iPhone connection Android connection
Maximum memory card / flash drive capacity	32 GB
Screen
Screen size	7 "	7 "
Resolution	800х480 px	800х480 px
Touch screen
Equipment
Multimedia	Windows CE 6.0 Bluetooth AirPlay MirrorLink	Windows CE 6.0 Bluetooth AirPlay MirrorLink
Equalizer
Number of fixed settings	4	4
Amplifier specs
Power per channel	45 W	45 W
Number of channels	4	4
Control
Volume control	knob control	knob control
Control functions	remote control remote control for steering wheel	remote control remote control for steering wheel
Outputs
Speaker connection	ISO/RCA	ISO/RCA
Line out	2	1
Video output (composite)	2	2
Subwoofer output
Inputs
front AUX
For backup camera
More features
Tuner bands	FM/AМ	FM/AМ
Illumination colour selection
Backlight	RGB	RGB
Added to E-Catalog	september 2019	september 2019

Maximum memory card / flash drive capacity

The maximum size of the memory card or USB stick (see "Media type") that the radio can work with normally.

High-capacity drives require fairly high processing power and may use special technologies that are not supported by all radios. This is the reason for the limitation on the volume of supported media.

Line out

The number of line outputs (see above) provided in the design of the radio. It should be noted that usually these outputs use RCA connectors (“tulip”), and the analog format allows only one audio channel to be transmitted through one such. Therefore, to work with a stereo signal, two RCA connectors are required, and just a pair of such jacks is considered to be one line output - a set designed for one set of stereo speakers. The main difference between this interface and the same RCA used to connect speakers (see above) is that the line output receives a signal from a preamplifier that is unsuitable for feeding to passive acoustics. Such a signal must be sent to active speakers or an external amplifier (whereas the speaker is connected to the output of a power amplifier designed for passive speakers).