United Kingdom
Catalog   /   Large Appliances   /   Washing Machines

Comparison Hansa ProWash WHP6101D3W white vs Hansa ProWash WHP6120D4W white

Add to comparison
Hansa ProWash WHP6101D3W white
Hansa ProWash WHP6120D4W white
Hansa ProWash WHP6101D3W whiteHansa ProWash WHP6120D4W white
Outdated ProductOutdated Product
TOP sellers
Main
Cycle acceleration function. Energy efficiency class A+++.
Specs
Loading typefront loadfront load
Capacity6 kg6 kg
Max. spin speed1000 rpm1200 rpm
Dryer
Tank materialplasticplastic
Heating element materialstainless steelstainless steel
Features
Number of programmes1616
Additional programmes
quick wash
quick wash
Safety features
Surge protection
Leak protection
Anti-foam control
Unbalance control
Child lock
Efficiency classes
Spin classCB
Energy classA+++A
More specs
Controlsrotary knob + buttonsrotary knob + buttons
DisplayLEDLED
Door openingleftwardleftward
Noise level (spin)
74 dB /59 dB when washing/
Loading hatch diameter
33 cm /hatch opening angle: 165°/
33 cm /hatch opening angle: 165°/
Dimensions (HxWxD)85x60x40 cm85x60x40 cm
Color
Added to E-Catalogjune 2018june 2018

Max. spin speed

Maximum drum rotation speed in spin mode. The higher it is, the more intense the spin. However, note that not all types of fabric normally tolerate high speeds — a speed of 1000 rpm or more should be used only for especially durable fabrics, and delicate ones need to be wrung out at low speeds, so the best choice is a machine that allows you to choose the spin speed.

The maximum spin speed ( 1200 rpm, 1400 rpm), in particular, determines its efficiency (see Spin class), but this parameter is not decisive — the duration of the spin cycle and the diameter of the drum also play an important role. Therefore, for machines with the same spin speed, their efficiency class may differ.

Surge protection

Power surge protection automatically turns off the washing machine in case of power surges. It protects the device's electronic circuits from hazardous loads and prolongs their service life. In this case, the programme running at the time of shutdown is remembered. And when the power is restored washing cycle continues from the point at which it stopped.

Spin class

The quality of the machine spin mode. The spin class depends on the residual moisture content of the laundry after the end of the washing programme and is indicated by the Latin letter from A to G, where A is the best efficiency, B and C are good, D, E are medium, F, G are very weak. The quality of the spin is closely related to the maximum number of revolves of the drum in this mode. Naturally, machines with better spin quality are more expensive, other things being equal.

Energy class

This parameter characterizes the efficiency of electricity consumption by the washing machine. Classes are designated in Latin letters from A to G, in ascending order of energy consumption. At the same time, in class A there are subclasses "A+", " A++ " and "A+++"; more pluses means less energy consumption, and the most economical option to date — A +++ — outperforms class A by almost a third.

Machines of classes A + and above are today considered economical, class A — medium, lower classes — high consumption. However, indicators below A are typical for semiautomatic low-cost models. As well as for units with dryers (see above) in which high energy consumption is simply inevitable.

Noise level (spin)

The maximum noise level produced by the machine during operation. Most often indicated for spinning — this is the noisiest mode of operation; for units without spinning (such as semiautomatic devices), this paragraph indicates the overall volume or the volume in the noisiest mode.

The quieter the machine works, the more comfortable it is for others. This moment is especially critical if there are small children in the house. However, the decibel used to measure loudness is a non-linear unit, and the actual noise level is best estimated from comparative tables in special sources.