Chargers & Jump Starters

• Cable & Clamp Length: 0.6m.• Delivers up to 1200 Peak Amps of initial starting power.• Composite case with integral battery clamp storage and carry handle.• Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L.• Front panel displays internal battery charge level and includes an integral LED work light.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.• Single 5V 2.4A USB output.• Supplied wi…

Always ready to use, saves time and has a long life: short charging processes do not strain the battery. 1600A00B8K Comes with 2 GBA 18V 5.0 Ah Batteries and 1 x GAL 1880 CV Charger. 1600A00L1V Comes with 2 36V 6.0Ah Coolpack Batteries and 1 GAL3680 Charger.

Highlights & detailsActivation of batteries with sulphate contentReactivation of deep-discharged batteriesPulse charging maintenance for maximum durabilityDescriptionThe innovative frequency charger with multi-level fully automated charging characteristics IUoUp without voltage peaks is very impressive. Batteries can be charged in the connected state, without causing any damage to the vehicle electronics (motor control). The pulse-maintenance charging keeps them ready for use at 95 – 100%. The charger may also remain permanently connected to the batteries.FeaturesQuick connector coupling for various connection optionsSulphate treatment ·

1. Mounting locationWarning! For safety purposes, the product should be installed in a heat-resistant environment. Avoid the presence of e.g. chemicals, synthetic components, curtains or other textiles in the immediate vicinity of the product.
1.1. Install the galvanic isolator in a well ventilated area.1.2. Keep a clear space of 10 cm around the product for ventilation.1.3. The galvanic isolator must be mounted with its length vertical to allow for maximum cooling. Under normal circumstances, the temperature increase of the heat sink is not more than 20 °C. However the unit may become hot when conducting fault ground current.
2. InstallationWarning! The galvanic isolator must be wired …

• Cable & Clamp Length: 0.6m.• 22Ah Professional grade, high output AGM battery especially formulated to jump start vehicles.• Fully sealed battery enables the unit to be stored in any position.• Features a lightweight, high-impact casing, which is durable and corrosion proof for easy portability.• Battery status LEDs indicate to the user when the battery is at full power, 75% charge, 50% charge or less and when the unit needs to be recharged.• A fusible link integrated in the output cable gives increased protection to the unit, while enabling fuse change without disassembly.• On/off switch for safety and control.• Features 12V accessory outlet including overload and short circuit protection.• Wei…

Product line: GENIUS2X4; Version: GENIUS; Charging Voltage [V]: 6 В/12 В; Current Strength [A]: 8; Alternating Current from [V]: 120; Alternating voltage to [V]: 240; Frequency range from [Hz]: 50; Frequency range to [Hz]: 60; Battery Capacity to [Ah]: 40; Temperature range from [°C]: -20; Temperature range to [°C]: 40; Power Consumption [W]: 30х4; Protection Type (IP Code): IP60; Short-circuit protection: Yes; Overheating protection: Yes; Overcharging protection: Yes; Surge protection: Yes; Reverse polarity protection: Yes; Weight [kg]: 1.77; Height [mm]: 145; Width [mm]: 239; Lowered Suspension [mm]: 59; Cable Length [mm]: 864; Charging Cable Length [m]: 3; Fuse Type: Melting Fuse; Protection [A]: …

Features:High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks
Charge cycle has 9 profiles designed to optimise the condition of the battery and the speed of the charge
It will recover a discharged battery (2V) to almost 100% of its original capacity
Designed for use with lead acid and lead calcium batteries including WET, GEL, AGMGEL and VRLA types on 12V and 24V systems
Temperature sensor allows accurate charging of battery even when cold

• Max. Charge: 40A(25A EN).• Max. Start: 180A(120A EN).• 12/24V Output.• Battery Range: 20-400Ah.• Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries.• Models feature easy-to-read ammeters and illuminated power switches.• Circuitry is protected by a panel mounted fuse.• Suitable for heavier garage use for engines up to 3L capacity.• Built-in polarity protection.Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for…

• Portable Mode-2 charger is fitted with BS approved 13A plug so it can be used with any standard 13A socket.• Delay timing function enables users to program delayed start time to benefit from off peak electricity tariffs.• The intuitive LED offers users fault codes, charging time, power and temperature displays.• Current: 10A Fixed.• Voltage: 230V 1ph.• UK 3-pin (BS1363) Plug.• Cable length: 5m.• Cable Specification: EN50620 - 3*2.5mm²+2*0.5mm².• Use with an RCD protected power supply.• Supplied with storage case.Portable Mode-2 charger is fitted with BS approved 13A plug so it can be used with any standard 13A socket. Delay timing function enables users to program delayed start time t…