Pliers KNIPEX

Knipex 86 09 250 V01 Protective Jaw Covers for 8609250 V01 (3 Pairs) Protective Jaw Covers for the revised pliers wrench (model from 2018) in the 250 mm length. These give damage-free gripping, holding and compressing of softer fixings and surfaces. Features: The perfect choice for designer fittings and other highly sensitive materials thanks to the soft, smooth gripping surface Allows the pliers to be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use Easy to attach by hand and reliable fixing on the jaws by means of an internal latching hook Set consisting of 3 pairs of protective jaws made of plastic Specification: Pack of 6

Pliers Accessory

Side Cutters / Ergonomic / 200 mm Length

Side Cutters / 125 mm Length

03 01 180 SB Combination PliersWith gripping zones for flat and round material, suitable for versatile use. With cutting edges for soft and hard wire. Long cutting edges for thicker cables. Cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 3.4 mmCutting capacities hard wire (diameter): Ø 2.2 mmCutting capacity copper cable, multiple-stranded: Ø 12.0 mmCutting capacity copper cable, multiple-stranded: 16.0 mm²

68 01 160 SB End Cutting NipperThe head shape provides optimised movement when tightening steel mesh knots during reinforced concrete work. With cutting edges for soft and hard wire. Also suitable for twisting and cutting binding wire. Cutting edges additionally hardened; cutting edge hardness approx. 61 HRC. self-service card/blister. Cutting capacities soft wire (diameter): Ø 4.0 mmCutting capacities medium hard wire (diameter): Ø 2.8 mmCutting capacities hard wire (diameter): Ø 2.3 mmCutting edge length mm (C): 25 mm

Concretor's Nippers / 280 mm Length

Pincers / 160 mm Length

Knipex 68 01 Series End Cutting Pliers with dipped PVC handles. They are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. With cutting edges hardened approximately 61 HRC, these pliers will help make light work on annealed tie wire used on reinforced rods or braided reinforced concrete mesh. These Knipex End Cutting Nippers have the following specification Length 200mm (8in) Cutting Capacity Hard 2.8mm, Medium 3.5mm, Soft 4.0mm

03 01 160 SB Combination PliersWith gripping zones for flat and round material, suitable for versatile use. With cutting edges for soft and hard wire. Long cutting edges for thicker cables. Cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 3.1 mmCutting capacities hard wire (diameter): Ø 2.0 mmCutting capacity copper cable, multiple-stranded: Ø 10.0 mmCutting capacity copper cable, multiple-stranded: 16.0 mm²

Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip. The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45 bent tips. Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip. Size 140mm Bore size 12-25mm

56140 J2 INT-CIRCLIP PLIER 19-60MM by Zoro Select

Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip. The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45 bent tips. Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip. Size 180mm Bore size 19-60mm

46 11 A1 SB Circlip PliersSolid style, forged. Non-slip, solid tips. DIN 5254 A; straight tips. self-service card/blister. Size of shaft: Ø 10 – 25 mmTips (diameter): Ø 1.3 mm

03 02 160 SB Combination PliersWith gripping zones for flat and round material, suitable for versatile use. With cutting edges for soft and hard wire. Long cutting edges for thicker cables. Cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 3.1 mmCutting capacities hard wire (diameter): Ø 2.0 mmCutting capacity copper cable, multiple-stranded: Ø 10.0 mmCutting capacity copper cable, multiple-stranded: 16.0 mm²

Flat Pliers

Flat Pliers / 160 mm Length

High quality handheld crimping tool for bootlace ferrule. Made from chrome vanadium electric steel and designed to automatically adjust to the size of the bootlace ferrule to make sure accurate work is performed with each crimp. A well designed transmission ratio which is hand friendly providing a comfortable grip and allowing the user to crimp easily with the perfect end result. Features and Benefits 97 53 04 Square compression now for end sleeves (ferrules) up to 16 mm Square compression for ideal contact surfaces in the clamp connection Suitable in particular for all twin end sleeves (ferrules) up to 2 x 6 mm or 2 x AWG 8 Repetitive, high crimping quality due to integral lock (self-releasing …

The Knipex 46 11 series of external straight circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. With opening spring. The slim head style allows use in confined areas. Like most of the Knipex range of pliers, all components are oil-hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade. Shaft size 3mm - 10mm

03 01 200 SB Combination PliersWith gripping zones for flat and round material, suitable for versatile use. With cutting edges for soft and hard wire. Long cutting edges for thicker cables. Cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 3.8 mmCutting capacities hard wire (diameter): Ø 2.5 mmCutting capacity copper cable, multiple-stranded: Ø 13.0 mmCutting capacity copper cable, multiple-stranded: 16.0 mm²

The head shape provides optimised movement when tightening steel mesh knots during reinforced concrete work
With cutting edges for soft and hard wire
Also suitable for twisting and cutting binding wire
Cutting edges additionally hardened
Cutting edge hardness approx. 61 HRC

70 01 125 SB Diagonal CutterThe indispensable diagonal cutter for all-round use. High-quality material and precise workmanship for long service life. Precision cutting edges for soft and hard wire. Clean cutting of thin copper wires, also at the cutting edge tips. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Narrow head style for use in confined areas. self-service card/blister. Cutting capacities soft wire (diameter): Ø 3.0 mmCutting capacities medium hard wire (diameter): Ø 2.3 mmCutting capacities hard wire (diameter): Ø 1.5 mm

The Knipex 44 21 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil-hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade. 44 21 J11 Bore Size 12-25mm 44 21 J21 Bore Size 19-60mm 44 21 J31 Bore Size 40-100mm Length 170mm ( 6 3/4 in). Size of bore 19-60 mm.

99 01 280 SB Concreters' NipperTo twist and cut wire in one operation: fast, reliable and economical. Cutting edges additionally hardened; cutting edge hardness approx. 61 HRC. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 2.8 mmCutting capacities hard wire (diameter): Ø 1.8 mm