Bike Fenders Shimano

##Shimano EW-SD50 E-tube Di2 Electric Wire 150mm This EW-SD50 Di2 cable for Shimano E-tube is a genuine replacement part. 150mm in length, the cable will not require any cutting to fit. The connectors are reliable and water resistant for uninterrupted riding.

Shimano 105 RD-5800 Pulley Set For GS Rear Derailleur You know how it is - bearings get muddied, and what once spun freely starts to seize a little. Well, with the Shimano 105 RD-5800 Pulley Set, you can at least put some new life back into your rear derailleur. With these genuine replacement jockey wheels offering a brand new feel and as new levels of resistance in your long cage rear 105 5800 derailleur, this is the perfect choice for anyone wanting to breathe some new life back into their ride.

Original roller of the brand Shimano, for assembly on derailleur SHIMANO 105 11 Speeds. The derailleur rollers ensure the tension and the guidance of the chain during the passage of your speeds. The roller and also called "Puley" It ensures the displacement of your chain, while the lower one named "String" its role and that in charge of the tension of the chain. In order to have a good precision and an optimal fluidity, the derailleur rollers must always be in good condition. They will be compatible with the rear derailleur range SHIMANO 105 R7000Technical characteristics of the roller kit Shimano 105 RD-R7000 Speeds :Type of use: RoadCompatible derailleur: RD-R7000-GS, RD-R7000-SSCompatible …

Derailleur pulleyorigine from Shimano, for derailleur SHIMANO Deore/SLX 12 speeds. The derailleur rollers ensure the tension and the guidance of the chain during the passage of your speeds. The roller and also called "Puley" It ensures the movement of your chain, while the bottom one named "String" its role and that in charge of the tension of the chain. In order to have a good precision and an optimal fluidity, the derailleur rollers must always be in good condition. They will be compatible with the ranges of rear derailleurs SLX M7100, DEORE M6100.Technical characteristics of the roller kit Shimano Deore XT RD-M8100/M8120 12 Speeds:Type of use: RoadCompatible derailleur: RD-M7100-SGS, RD-M7120-SGS,…

Shimano Ultegra 6700 and 105 5700 Tension and Guide Pulley Set Breathing new life into your bike, and offering you a responsive and low friction replacement for your old and worn jockey/pulley wheels, this genuine replacement part is ideal for 10-speed chains, offering that crucial tension. Compatible with a variety of Shimano Ultegra 6700 and 5700 rear derailleurs. Compatible Rear Derailleurs Shimano Ultegra RD-6700-A-G Shimano Ultegra RD-6700-A Shimano Ultegra RD-6700-G Shimano 105 RD-5700-A

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

Shimano EW-JC302 SD300 2 Port Junction The EW-JC302 2 Port Junction connects EW-SD300 wires in any Shimano electronic Di2 setup. It sits neatly inside the frame and is extremely reliable with water-resistant connectors.

Gear Cable Set / Derailleur / Compatible with Shimano / Plastic / Length 90 cm / Waterproof Plug

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

Gear Cable Set / Derailleur / Compatible with Shimano / Plastic / Length 120 cm / Waterproof Plug

Shimano EW-SD50 E-Tube Di2 Electric Wire 1400mm Used to connect the components within any Shimano Di2 groupset, this E-Tube Di2 Electric Wire is 1400mm long. The exact length wire required should be used as it is not possible to trim this cable to length. Water-resistant connectors join the wire to the Di2 component, providing reliable shifting for any 10 or 11-speed Ultegra or Dura-Ace Di2 groupset.

Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm A Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm is required to connect the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. Reliable and secure water-resistant connectors. Please note: EW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cables.

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

##Shimano EW-SD50 E-tube Di2 Electric Wire 650mm The 650mm long EW-SD50 E-tube Di2 Electric Wire can be used to connect the battery indicator junction box to the shifters, front or rear derailleurs, or battery. It uses secure water resistant connectors to ensure a reliable signal. Can be used with 10-speed or 11-speed Ultegra or Dura-Ace Di2 systems. The correct length wire should be chosen as there is no facility for the cables to be cut.

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

##Shimano EW-SD50 E-tube Di2 electric wire, 250mm The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. The Shimano EW-SD50 E-tube Di2 electric wire, 250mm connects the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. The water resistant connectors are reliable and secure and come in variable lengths as it is not possible to cut them to fit.

Shimano SM-JC41 Di2 Internal Cable Junction The Shimano SM-JC41 Di2 Internal Cable Junction is used for internal wire routing. The junction is required for connection of rear mech, front mech, battery and cable to battery indicator junction box. It is positioned neatly inside frame tubing when connected. Reliable and secure water-resistant connectors. Cables sold separately.

Gear Cable Set / Derailleur / Compatible with Shimano / Stainless Steel

##Shimano EW-SD50 E-tube Di2 Electric Wire 200mm For the rider using and setting up their own Di2 groupset, making sure that you've got all the cabling at hand and in the right lengths is a critical concern. With the Shimano EW-SD50 E-tube Di2 Electric Wire 200mm, you can make sure to connect up the dots in your electronic groupset and make sure that your junction box is communicating with the rest of the components on your bike. Ready sized at 200mm to offer the perfect length for your bike, this cable transmits electronically, meaning that all your shifting information is carried out accurately, rather than relying on typically stretchy wires.

Shimano EW-AD305 SD300 to SD50 Conversion Adapter The EW-AD305 SD300 to SD50 Conversion Adapter allows the older Shimano Di2 SD50 E-Tube wires to be connected to the newer, slimmer EW-SD300 wires. It provides a secure and reliable connection that is stable and water-resistant.

Shimano Dura-Ace 9000 Road Gear Cable Set with Polymer Coated Inner Cables The Shimano Dura-Ace 9000 Road Gear Cable Set with Polymer Coated Inner Cables is a complete top-of-the-range gear cable set designed to suit Dura-Ace 9000 gears. Fitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one pack!

Shimano EW-SD300 E-tube Di2 Electric Wire 150mm - 250mm For use with Shimano Di2 electronic groupsets, the EW-SD300 E-tube Di2 Electric Wire 150mm - 250mm provides a reliable signal transfer between components. Please select the most appropriate length, these cables cannot be trimmed to length. Image for illustration purposes only, not indicative of actual length.

Roller assembly Shimano (RD-M9000)