Submersible (Drainage) Pumps

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

VX VORTEX Submersible pump for sewage water INSTALLATION AND USE Suitable for use in domestic, civil and industrial applications where the water, such as groundwater, surface water and sewage water, contains suspended solids up t50 mm They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. PERFORMANCES Head +15% as compared to previous versions Flow rate +30% as compared to previous versions TECHNICAL CHARACTERISTICS Cast

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

The PuddlePal is a versatile and portable 2" submersible pump for clean water, featuring the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat roofs. Applications include: • Small water features • Residue • Cellars and Basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering • Lift Shafts

The SAM 316-80/S submersible pump is for pumping seawater, saltwater and chemicals. Constructed from 316-grade cast and pressed stainless steel, it has a pendant type float switch for automatic level control. It also comes fitted with wear resistant double mechanical seals in silicon carbide, carbon ceramic and Viton. Supplied with 10 metres of heavy duty, rubber power cable. The 230V motor is fitted with internal overloads and internal starting capacitors. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together).This model covers most, but not all global seawater

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

VX-MF VORTEX Submersible pump in stainless steel for sewage water INSTALLATION AND USE Suitable for use with sewage water in domestic, civil and industrial applications or in any other situation, such as with water mixed with mud, with groundwater and with surface water, where the water contains suspended solids. They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS Precision cast stainless steel

Lowara SCUBA 107660130 SC411C L27 1,1 kW / 1,5 HP / 1x220-240V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Single-phase pump WITHOUT float switch

Clarke's truly heavy duty, industrial quality submersible dirty water cutter pump benefits from a corrosion resistant stainless steel drive shaft and body. It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation. This enables the HSEC650A pump to happily pump dirty water, even sewage water, all day long and for cost-conscious, economic operation it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch - as the water level rises this activates the pump, and turns it off once desired water level has been reached.

The Select Brand Arvex/S (230V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with seawater and saltwater and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 50°C (25°C if part submerged) and this unit also benefits from a built in handle and included hose connector. Completing this product is a 316 grade

The PTS is a heavy duty submersible chopper pump ideal for particularly heavy applications that require a preliminary chopping of the solid material suspended in the liquid being pumped. Each pump has a large, through passage, open multi-channel impeller and double cutting system in suction inlet.

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

The handy angle adapter has the skill. With it, hose, tube or socket systems can be quickly and easily attached to the pump in one step and flexibly positioned 360°. The integrated carry handle in the pump housing simplifies the transport of the compact and lightweight TWP 4006 E at only 4 kg in the garden or elsewhere. Ideal for pumping, pumping around and pumping e.g. swimming pools, rain barrels, wells or basements after flooding or heavy rain as well as working in drainage wells. It also serves as a suspension for the nylon rope (10 m) included in the volume of supply to lower the submersible pump to wells, cisterns or other basins.

VX VORTEX Submersible pump for sewage water INSTALLATION AND USE Suitable for use in domestic, civil and industrial applications where the water, such as groundwater, surface water and sewage water, contains suspended solids up t50 mm They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. PERFORMANCES Head +15% as compared to previous versions Flow rate +30% as compared to previous versions TECHNICAL CHARACTERISTICS Cast

Designed to pump clear water from ponds & pools. Suitable for operating waterfalls, fountains, irrigating gardens and draining cellars, sinks, cisterns & baths. Includes a fitted float switch for automatic water level control. Stainless steel pump body.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. Hose connector included and 10m of heavy duty H07RNF cable. Selectable manual or auto mode - auto will turn on at 251mm and off at 81mm and work in confined areas.

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.