Diving Accessories XS Scuba

Make any primary regulator more comfortable while diving.Routes the hose under the right arm instead of over the shoulder.Often used on octopus to improve hose routing.Installs between the second stage and the regulator hose.Chromed brass construction.Low pressure use only - below 200 psi.Factory cleaned - Viton o-rings.

Connector that directly fits the 1st stage outlet ports. This enables you to connect a LP hose in an ideal way that would not be possible without this rotatable adapter!

This brassed adapter with an 90° angel fits between HP hose and 1st stage. The whole adapter is rotating, so it´s good for strait hose configuration, eg with rebreathers.

First Stage Quick DisconnectQuick and convenient way to change hose lengths between divesInstalls between 1st stage and LP regulator hoseLock-down screw to prevent accidental disconnectionFlow rate = 800 lpmLow-pressure use only – below 200 psiFirst Stage Quick Disconnect – Male OnlyInstall on multiple LP regulator hoses for quick swaps

Add trim weight in the center groove of your backplateAttach with twin cylinder band bolts11inch/28cm center to centerSealed opening with double VelcroJust pour in your lead shot of up to 5 lbs./2,2kg

Features:- Converting your regulator/hoses to 1/4 NPT has many practical application in diving as well as your garage or shop- Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools- Viton o-rings where applicable- 1/4 NPT male to 3/8-24 UNF female- Stainless steel construction

Features: - Make any primary regulator more comfortable while diving - Routes the hose under the right arm instead of over the shoulder - Often used on octopus to improve hose routing - Installs between the second stage and the regulator hose - Chromed brass construction - Low pressure use only - below 200 psi - Factory cleaned - Viton o-rings

ADAPTER 90 DEGREE 1ST STAGE LP SWIVEL 3-8.Adapter 90 degree for LP port of 1 stage, with swivel, UNF 3-8, chromed brass.

Attach one end to a first stage low pressure port.The other end allows the attachment of a industrial style hose with 1/4 NPT female threads.3/8-24 male to 1/4 male NPT.Brass construction with black chrome finish.Low pressure only - below 200 psi.

Features: - Converting your regulator/hoses to 1/4 NPT has many practical application in diving as well as your garage or shop- Used with surface supplied umbilicals, switch blocks, comm gear and pneumatic tools- Viton o-rings where applicable- 1/4 NPT male to 9/16-18 male- Stainless steel construction

Rear Tail Ballast Pocket 2,7 kg.The XS Scuba Tail weight bag (2.7 kg) is designed to screw onto the lower end of the backplate to optimise the diver´s fit.Weight: holds up to 2.7 kg.

Features:Add a quick-disconnect to most any regulator or full face maskInstalls between low pressure regulator hose and second stageLock-down screw to prevent accidental disconnectionChromed brass constructionLow pressure use only - below 200 psiFactory cleaned - Viton o-ring

Regulators - Accessories.XS SCUBA Carabiner Adapter 2nd Stage 1/3 Ports.Carabiner adapter second stage 1/3 ports.

Male quick-disconnect only of AC990, Allows attachment of multiple second stages to a single hose, Chromed brass construction, Low pressure only - below 200 psi, Factory cleaned - Viton o-ring.,.

Elbow Adapter 70 second Stage.

Elbow Adapter 90 second Stage.

Features:Convert any standard regulator hose to a BC quick disconnect hoseInstalls on the second stage end of a regulator hoseSix point attachment with six ball-bearings´EZ´ QD design, just push to attach - no need to pull back the collarWide easy grip collarA favorite for drysuit inflation hosesChromed brass constructionLow pressure use only - below 200 psiFactory cleaned - Viton o-rings

Features: - Install between first stage medium pressure port and standard regulator hose.- Slide machined Delrin collar to shut off gas flow.- Commonly used with rebreather systems.Specifications: - 3/8-24 UNF male inlet to 3/8-24 UNF female outlet threads.- Low pressure use only - below 200 psi.

Features:- Bright, white face - easy to read- Ready to mount directly to a HP port of first stage- Ready to mount directly to a HP hose- Inline adapter and airspool included- Airspool with Viton o-rings- Viton gauge o-ring- Luminescent gauge face- Wide 210º sweep- Attractive clamshell packaging

- Add an additional high pressure port to your regulator´s first stage.- Additional port allows for 360º swivel.- One 7/16-20 male to two 7/16-20 female outlets (common HP port).- Chromed brass construction.- High pressure use - Maximum 5000 psi / 340 bar.- Factory cleaned - Viton o-rings.

Add to any pressure gauge, console or air integrated console which uses a standard high pressure hose Remove your gauges for safe storage Bayonet mount style quick-connect (push and turn) Gauge attachment end has 7/16-20 female threads Hose attachment end has 7/16-20 male threads Airspool with iton o-rings included Brass construction with black Chrome finish.

Features:Install between standard regulator hose and second stage9/16-18 UNF male inlet to 9/16-18 UNF female outlet threadsSlide machined Delrin collar to shut off gas flowPrevent critical gas lossCommonly used with deco rigs, stage bottles & drysuit inflationLow pressure use only - below 200 psi

Features:- Included with Mini Tech Gauge Kit- Use to mount a Mini Tech Gauge to HP hose- Inline (180º) with the HP hose- Airspool with Viton o-rings included

Stainless steel construction.Valve DIN insert 1/4´´ hex wrench.Port plugs 3/16´´ hex wrench.Valve dip tube 5/32´´ hex wrench.Valve nut slotted screwdriver.Phillips screwdriver.Inflator schrader valve tool.O-ring pick.Orifice adjustment flat screwdriver.