Amplifiers

The Marantz Model M1 is a compact streaming amplifier thats set for the future of hi-fi audio home entertainment and wireless music setups. Designed to fit discreetly in your living space or a dedicated hi-fi rack this amp can connect with your HEOS ecosystem and TV making it simple to incorporate into your daily life. The built-in HEOS technology allows for streaming via WiFi AirPlay 2 Bluetooth and Spotify Connect controllable directly from your smartphone or tablet. HDMI eARC and Dolby Digital+ decoding also enhance TV sound quality and allow seamless control via your TV remote for a downsized entertainment experience that doesnt compromise sound quality.The Model M1 delivers 100W per channel …

TOA A-3624D audio amplifier Black

The A200 is a 320W amplifier with an ultra-small size and weight to integrate in your small and medium installations. The sophisticated and elegant design allows you to install it where it is most convenient for you. Take advantage of the aptX HD BT and enjoy the high sound quality with maximum convenience. You can use your A200 down to 4Ω minimum impedance. Gold Plated Binding Posts ensure an excellent conduction of the audio signal and a high-end look to the device. Controls: Volume;Source Select UK/EU Power supply included: Yes Bluetooth: Yes Package Contents: Manual;Power Supply;Bluetooth Antenna Inputs: RCA stereo Input;BT Remote Control: No Headphone Output: No Number of Channels: …

Maximum power per channel: 800WModel: switching power supply boardWorking voltage: dual AC24-45VSize: 25X13.5X5.5cmApplicable: suitable for low-power digital amplifiers and analog amplifiersColour:Photo ColorMaterial:plastic+metalPosition:LeftPackage Contents:1 x Digital Amplifier BoardOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Class-d amplifier providing 50 watts/channel (RMS) into 8ohm loads or 65 watts/channel into 4ohm loads. Bridgeable output provides 120 watts into a single 8ohm load 4 pole detachable speaker screw connector (Phoenix connector) with support for up to 12AWG speaker wire. 12-volt trigger input for power-on/off. 12-volt trigger output for controlling other devices. Buffered loop output of original signal for connecting additional amplifiers Rear panel volume gain adjustment. Built-in thermal and short circuit protection circuits Includes rack-mount ears for mounting a single amp or two amps side-by-side

Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz 4x high-end dual op-amp OPA1612 and a large number of audio grade components All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64 Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits

Power: A true 200-watt experience. Unlike most amplifiers or receivers, the Monolith's 200 watts per channel rating is measured with all seven channels driven across the full power bandwidth of 20Hz to 20kHz into 8-ohm loads. Additionally, there is NO current limiting and there is no protection circuitry in the amplifier circuit path. Even if the speakers' impedance drops to a low level, the Monolith is robust enough that the current is never limited. Dynamics: High resolution audio delivers the best in music and movie soundtracks. You deserve an amplifier capable of delivering clear and clean audio across a wide dynamic range! With a more than 120dB signal to noise ratio, the Monolith 3 …

Digital-to-Analogue Converter / XLRIn Balanced / 1x S/PDIF IN (RCA Coaxial) / Bluetooth

Trade in your Anthem MRX 540 7.2 Channel AV Receiver with AV.com. Its a wise decision considering the evolving nature of audio-visual technology. Trading in the Anthem MRX 540 might be an opportunity to upgrade to equipment that better suits current needs. Perhaps an advanced home theatre system or a latest generation AV receiver could be the next step. At AV.com the trade-in process is designed for convenience making it easy to switch from one piece of equipment to another. Keep in mind trading in is not merely about cost-effectiveness; its also about staying abreast with the latest in technology. Discover the simplicity and value of trading with AV.com.

Wall-mounted USB / microSD / MP3 player with large 2.8 "color graphic LCD display, FM tuner and built-in 4-channel digital amplifier with 4x 25W power. The player also includes Bluetooth for wireless music playback from a mobile phone, tablet or PC, 1x AUX The player is supplied with an IR remote control.The player can also play video files on the color display.It is mounted in a mounting box (included in the package) in the wall as a light switch.It is suitable for sounding rooms, kitchens, bathrooms, offices, bar, restaurant or gym. - impedance 4x 4-8Ω- Class D amplifier with high efficiency 85%- the display shows a list of MP3 file names, playback status, Bluetooth pairing indication,…

It's all about gain and impedance. While some of the best sounding microphones out there are low-output dynamics and ribbons, pre-amplification can be challenging due to the gain and impedance requirements. Cloudlifters address this by giving passive microphone signals a major inline boost -up to +25db of ultra-clean gain- while properly loading the microphones' transformer for optimal performance. The Cloudlifter CL-1 is completely self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget

This speaker selector is an audio signal switch controller center. It provides two sets of amplifier inputs and two sets of speaker outputs, making it convenient and flexible to listen to different loudspeakers and power amplifiers. Features: Provides two sets of amplifier inputs and two sets of speaker outputs, each with independent switch. Compatible with all types of power amplifiers and speakers. Each channel supports power up to 200W, it produces quality sound with zero noise and zero interference and will not degrade sound. Passive device needs no external power supply and delivers loseless transmission. Compact size with heavyduty steel housing, suitable for any system.

Rack-mountable, one-channel vacuum-tube channel strip that is a great solution for both studio and live applications. Featuring tube preamplification, a VCA-based compressor, and three-band EQ, it delivers a huge variety of timbres, allowing user to produce luscious, in-your-face vocals, dynamic acoustic piano, and fat, solid bass guitar, not to mention crystal-clear acoustic guitars and cracking snare. Its Class A preamplifier starts with a high-output 12AX7 tube that operates on voltages double that of other preamplifiers in its class. The result is lots of headroom and big tone. Gain and Tube Drive controls enable a wide range of sounds, from transparent and clear to edgy and overdriven. …

AK4493S: The DX1 uses newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Plug and play turn your PC into a HIFI source: DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply

Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Sound quality is never a problem: With the help of NFCA, L30 II easily reach the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to

Support MQA full decoding: 1. Clean up the recording. When the analog sound is converted to a digital signal,time blurring will occur, blurring transient signals over time. MQA can eliminate this distortion and create a true 3D sound field, which is different from any sound you have ever heard. 2. Encapsulate the sound. Once the blur in the recording is removed,MQA will use what we call a "musical origami" process, Cleverly makes this large resolution file easy to manage and can compatible with any service or playback device. Flagship DAC chips 1pcs AK4191+2pcs AK4499EX Tapping into the full potential of the chip. CD Player + MQA-Enabled DAC: Your CD