Effects Pedals

Analogue modelling acoustic guitar preamp/stompbox with DI recording output that has been designed to compete head to head with leading products on the market. Its authentic tube/microphone modelling circuitry provides the natural warmth and presence, as if the acoustic guitar was miked through a tube pre-amp. It features the ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezo pickups; dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode; and ground lift switch that eliminates typical ground loop problems. Device has super-high impedance to retain …

The Behringer EQ700 Graphic Equalizer Pedal offers complete tonal shaping across the full range of frequencies. Either boost or cut each band up to 15dB providing your tone with the utmost customisation. You can highlight every critical frequency drawing out certain aspects of your guitar elevating chordal playing with scintillating highs or giving your riffs additional depth thanks to its range from 100Hz to 6.4kHz. Drawing out every aspect you can create the ideal guitar tone.

Compact 7-band graphic equalizer pedal with wide frequency range from 50 Hz to 10 kHz for electric bass guitar that provides total shaping control over the tone and eliminates feedback. 7 frequency bands (50, 120, 400, 500, 800 Hz; 4.5, 10 kHz) with a 15 dB of Boost/Cut provide extensive tone-shaping options, while first-class electronic on/off switch ensures noise-free operation. Pedal also features status LED for effect on/off and battery check. It can be powered by 9 V battery or 9 V adapter PSU (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No
Тype: Equalizer
Battery Detail: Al/Mn
Power Supply: Adapter…

The Behringer SF300 gives you every tool you need to create enormous fuzzy soundscapes. Utilising two separate fuzz modes and an additional boost you can create searing-hot sounds at any moment. Fuzz 1 breathes vintage character with a prominent midrange and a sparky sound. Fuzz 2 gives a modern-bass heavy tone which welcomes any style with its delightful warmth. Then you can crank everything up to the max with a +24dB gain. Its time to see what all the fuzz is about.

The Behringer CL9 Compressor/Limiter Pedal allows you to balance every aspect of your performance. Ensuring each note rings at a similar volume consistently guaranteeing that quiet notes cut through the mix while louder and harsher notes are dampened to ensure that they arent lost within the performance. This allows you to play with subtle nuance while also having the peace of mind that each aspect of your playing is captured perfectly.

The Behringer OD300 lets you combine and balance overdrive and distortion to find your ultimate dirt tone. This is achieved thanks to clever design inside are two separate circuits- 1 for overdrive and another for distortion (identical circuitry to a famous orange distortion pedal and yellow overdrive). The pedal then lets you blend these signals together with the added ability to tweak gain level and adjust tone for even more sonic adaptability. The end result is the most customisable dirt tone on the market.

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct record output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Тype: Preamp;DI Box
Made in: China
UK/EU Power supply included: No
Battery Detail: Al/Mn

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds – from clean to crunch to super-fat distortion.
Тype: Distortion;Tube Amp Modeler;Equalizer
Made in: China
Battery Operation: Yes
UK/EU Power supply included: No
Power Supply: Adapter

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Тype: DI Box
UK/EU Power supply included: No
Made in: Germany

Digital stereo reverb effects pedal for electric guitar that is comparable to state-of-the-art studio processors and delivers 24-bit high-resolution stereo reverbs including Spring, Plate, Hall, Gate, Room and Modulate. It features dedicated Mode, Time, Tone and Level controls for awesome sound shaping, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Тype: Reverb
Made in: China
Power Supply: Adapter
UK/EU Power supply included: No
Battery Operation: Yes
Battery Detail: Al/Mn…

Bass guitar headphone amplifier from amPlug 2 series that is designed specifically for low frequencies, offering a wide-range response. It delivers three modes and features a dramatically improved analogue circuit. It also provides a rhythm function, foldable plug mechanism that rotates 180 degrees and an auto power-off function for improved convenience and ease of use. The pre-amplifier is powered by two AAA batteries (up to 11 hours of operation time, 17 with RHYTHM off), and provides a headphone output and an aux input. AAA alkaline batteries are included.
Power Supply: None, Only Battery Operated
USB: No
DI Output: No
Controls: Rhythm;Tone;Volume;Volume/Tempo
Battery Type: AAA
MP3 / Line …

The TC Electronic Afterglow Chorus Pedal is equipped with a bucket-brigade circuit device and delivers a full host of three-dimensional modulation tones. You can benefit from its highly intuitive easy-to-use control options including the rate depth and mix - letting you find your own unique sound. Its simple design also includes a durable metal chassis along with top mounted jacks. The Afterglow Chorus pedal also sits in a highly affordable price range making it ideal for both developing and established players alike.

The NUX NCP-2 Sculpture Mini Compressor is a powerful tool for sharpening your tone like an axe. It compresses your signal taming the loudest parts and boosting the quietest massively increasing sustain and articulation. Your solos will cut through the mix and your low end will sound super tight for rhythm playing. You can experiment with no clipping soft clipping and hard clipping each of which will create a different voicing for your riffs. The Blend and Sustain dials let you further control your tone adjusting the dry/wet compressor effect and length of time your notes ring out respectively. Its time to sculpt your sound to perfection.

Wah-Wah

The TC Electronic Skysurfer Reverb is a guitar pedal packed full of versatile reverb options for adding texture to your performances. Housed in a robust compact chassis the Skysurfer offers three reverb modes including spring plate and hall for an effective and diverse sound. With its true bypass circuit this compact pedal maintains a clear and consistent sound even when not disengaged. As well as tone its simple and intuitive three-knob layout provides you with an easy-to-use interface that can be easily tweaked to achieve the perfect sound. Like others in the TC Electronic series the Skysurfer features top-mounted jack input/outputs allowing you to optimize the space of your pedalboard helping …

Sound buffer that protects against signal amount and quality loss which happens with large pedalboards with many pedals and with long cables. This buffer compensates for the loss of the signal and can work at the beginning or at the end of the effect line and doesn’t need any controls. Thanks to the components being used, the amount of hum is minimum. RockBoard Natural Sound buffer is encased in a durable metal construction, houses In/Out Jack inputs and is powered by a 9V power supply, which is not included.
UK/EU Power supply included: No
Battery Operation: No
Made in: China
True Bypass: None;No
Outputs: Mono
Colour: Black
Inputs: Mono
Тype: Buffer
Power Supply: 9V DC ( - )
Length (cm): 7.4…

Flanger / Pedal Design Foot Pedal / Effects Flanger

NU-X Morning Star is a blues drive pedal with a twist. Along with standard Drive, Level and Tone controls, holding the on/off pedal engages a Shine mode, which boosts the high frequencies adding sparkle to cut through a mix. Wide ranging gain adjustment offers tones from natural break-up to thick authentic overdrive. Enough range for blues to full-on rock styles. Features: Drive, Tone and Level controls True or buffered bypass operation Switchable Shine treble boost effect Requires 9V centre negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Input impedance: 1M Ohm Output …

Chorus / Pedal Design Foot Pedal / Effects Chorus

The JOYO JF-323 Wooden Sound Acoustic Simulator pedal it is set to impress with its simulation of an acoustic sounding guitar. Turn your electric guitar into an acoustic one at the press of a button. With the latest mini pedal from JOYO the Wooden Sound Acoustic Simulator effect expands the range of your guitar tone without swapping out your guitar mid track, or compensating on the mix. With four controls, one each to adjust the High, Mid, Bass and Volume levels you can dial in the exact tone that you want. An amazingly nice pedal that punches above it's price range. Unlike a lot of acoustic simulator pedals this one actually sounds like you are playing an acoustic through a PA rather than just …

Reissue series amp simulator pedal for guitar or bass. The Plexi Crunch provides a high gain distortion based on a hot-rodded British valve amplifier for classic crunch and heavy power chords. All analog circuitry ensures a pure signal path and both Tone and Presence controls closely mimic the same tone sculpting controls found on these classic amplifiers. Classic stack sounds for rock and metal guitar styles. Features: Pure analogue amplifier simulation True bypass hardware switching Preamp, Master, Tone & Presence controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Preamp, Master, Tone, Presence & foot switch Input impedance: …

Switcher and signal splitter. A/B or A&B to Y mode switch, on/off footswitch, status LED (A: red, B: blue, Y: pink), 3 in-/outputs A/B/Y, 6,3 mm mono jack, optional AC adapter 9V DC (center minus plug), can be used w/o power supply (LED stays off), metal housing, dimensions (D x W x H): 93,5 mm x 42 mm x 52 mm, weight: 160 g
Made in: China
Power Supply: 9V;Adapter
UK/EU Power supply included: No

An exact re-creation of the original LPB-1 circuit, which ushered in the age of overdrive in 1968. Put the EHX LPB-1 in front of any effect to dramatically increase definition from its cleaner and heavier input drive. Control the gain and saturation of any amp. The LPB-1 puts impact into your tone.
Battery Type: 9V
Battery Detail: Al/Mn
Power Supply: Adapter or Battery
Inputs: Jack 6,3 mm TS
Outputs: Jack 6,3 mm TS
UK/EU Power supply included: No
True Bypass: Yes
Battery Operation: Yes
Number of Buttons: 1
Made in: USA
Тype: Boost
Controls: Boost

The signal-pollution from the decadent, noise-producing effect pedals is not welcome behind the iron curtain! Iron Curtain is a classic, simple no-nonsense noise gate with intuitive controls, high quality components and zero tolerance for any unwanted noise in your signal - only the purest tone is welcome in the noise-free republic! Some old amplifiers or some venues just have a lot inherent noise. If the dynamics of your playing is important to you, going from a soft touch with barely audible notes and up to blasting the roof off, a good noise gate can help you keep that sonic image sharp and crisp. Iron Curtain is built on a classic all-analog circuit that will keep out any unwanted noise …