Car Jacks

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle. Features and Benefits • Min./Max. Height: 222/447mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2pc handle. • Model No. SJ8 Specifications Model No SJ8 Brand: Sealey Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mm Minimum Height: 222mm Nett Weight: 4.8kg Screw Extension: 80mm

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 3-piece handle. Fitted with carrying handle. Features and Benefits • Min./Max. Height: 260/420mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 3-piece handle. • Fitted with carrying handle. • Model No. SJ30 Specifications Model No SJ30 Brand: Sealey Capacity: 30 Tonne Hydraulic Lift: 160mm Maximum Height: 420mm Minimum Height: 260mm Nett Weight: 17.8kg Screw Extension: n/a

Pressed steel wheel dolly with four Ø90mm metal castors. Handles tyres with a width up to 355mm. Suitable for use in bodyshops and workshops. Features and Benefits • Two pressed steel wheel dollies. • Capacity: 454kg/dolly. • Ø90mm Metal castors. • Handles tyres with a width up to 355mm. • Suitable for use in bodyshops, workshops and car parks. • Model No. WS454 Specifications Model No WS454 Brand: Sealey Capacity Each: 454kg Castor Diameter: Ø90mm Maximum Tyre Width: 355mm Nett Weight: 17.26kg Weight Each: 9kg

Used for lifting on contoured and round lifting surfaces. Provides more access underneath the vehicle making it easier to work on. Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact. Suitable for use with SEALEY Viking 4 Tonne Jacking Beams. Features and Benefits • Used for lifting on contoured and round lifting surfaces. • Provides more access underneath the vehicle making it easier to work on. • Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact. • Suitable for use with SEALEY Viking 4 Tonne Jacking Beams. • Model No. SJBEX.A04 Specifications Model No SJBEX.A04 Brand: Viking Capacity: 4 Tonne Nett Weight: 0.84kg…

Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. High quality rubber, providing a sturdy and durable point of contact. Secure fit to vehicle, moulded to fit bespoke vehicle fitting. Supplied in a case for easy storage in your vehicle. Features and Benefits • Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. • High quality rubber, providing a sturdy and durable point of contact. • Secure fit to vehicle, moulded to fit bespoke vehicle fitting. • Supplied in a case for easy storage in your vehicle. • Model No. JP28 Specifications Model No J…

Designed to support suspension struts during repair operations. To be used in conjunction with Model No. 600TR or other transmission jacks with a minimum base size of 560mm x 570mm. Only use with a ram size of 30mm diameter. Developed by Sealey.Features:• Designed to support suspension struts during repair operations.• To be used in conjunction with Model No. 600TR or other transmission jacks with a minimum base size of 560mm x 570mm.• Only use with a ram size of 30mm diameter.• Developed by Sealey.• Model No. VS3847SpecificationsModel No VS3847Brand: SealeyNett Weight: 2.56kg

Textured base provides better grip on the jacking beam. Soft surface prevents damage to the car underbody when lifted. Slot in the support block allows the car to be lifted by the sill. Manufactured from rubber, providing a sturdy and durable point of contact. Suitable for use with SEALEY Viking jacking beams. Features and Benefits • Textured base provides better grip on the jacking beam. • Soft surface prevents damage to the car underbody when lifted. • Slot in the support block allows the car to be lifted by the sill. • Manufactured from rubber, providing a sturdy and durable point of contact. • Suitable for use with SEALEY Viking jacking beams. • Model No. SJBEX.A03 Specifications Model No SJB…

• Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg.• Easy manoeuvring around the workshop or garage.• Front and rear lever operated wedge gates allow for easy loading and unloading. • 5-Position side stand platform to fit varied length side stands.• Features front/rear steel pins, to keep the motorcycle on the dolly during moving, and smooth-rolling dual castor wheels.• Overall Dimensions (L x W x H): 2120 x 770 x 90mm.• Loading Track Dimensions (L x W x H): 2000 x 200 x 50mm.Motorcycle dolly holds a single motorcycle with a side stand, weighing up to 565kg. Easy to manoeuvre around the workshop or garage. Front and rear lever operated wedge gates allow for easy…

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 3 tonne. Features and Benefits • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 3 tonne. • Model No. WC01 Specifications Model No WC01 Applications: Suitable for vehicles below 3 Tonne Brand: Sealey Dimensions (W x D x H): 100 x 195 x 150mm Material: Rubber Nett Weight: 3.79kg Weight Each: 1.8kg

• Replacement hydraulic ram for SSC900 engine crane.Replacement hydraulic ram for SSC900 engine crane.• Replacement hydraulic ram for SSC900 engine crane. • Model No. SSC900.08Technical Specification:Nett Weight: 17.5kgRam Capacity: 3000kgRam Diameter: 27.85mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 634mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 17.512KgWarranty: Consumable

• Replacement hydraulic ram for SPC2000 engine crane.Replacement hydraulic ram for SPC2000 engine crane.• Replacement hydraulic ram for SPC2000 engine crane. • Model No. SPC2000.28Technical Specification:Nett Weight: 17.5kgRam Capacity: 8000kgRam Diameter: 37.89mmRam Travel: 624mmPump Type: Twin SpeedRam Pin Hole Diameter: 22.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 797mm**Overall Length (Min.): 855mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 150mm x Height: 860mmWeight: 18KgWarranty: Consumable

• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable

• Replacement hydraulic ram for SC10LR.V3 engine crane.Technical SpecificationNett Weight: 11kgRam Capacity: 7257kgRam Diameter: 30mmRam Travel: 480mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min): 650mmOverall Length (Min): 665mmBase mount Type: Double ClevisTechnical Specification:Capacity: 7257kg Diameter: 30mmDimensions: Length: 710mm x Height: 150mmWeight: 9.99KgWarranty: 1 year

Ratchet type axle stands with cast iron support posts. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features and Benefits • Min./Max. Working Height: 285/420mm. • Capacity: 6 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel-plate welded bases. • Sold in pairs. • Model No. VS2003 Specifications Model No VS2003 Brand: Sealey Capacity Each: 3tonne Capacity Pair: 6tonne Maximum Working Height: 420mm Minimum Working Height: 285mm Nett Weight: 6.40kg

Ratchet type axle stands with cast iron support posts and tough steel plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features and Benefits • Min./Max. Working Height: 275/415mm. • Capacity: 4 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel plate welded bases. • Sold in pairs. • Model No. VS2002 Specifications Model No VS2002 Brand: Sealey Capacity Each: 2 Tonne Capacity Pair: 4 Tonne Maximum Working Height: 415mm Minimum Working Height: 275mm Nett Weight: 5.1kg

• Suitable for supporting large multi-cylinder engines (maximum weight 100kg).• The supports can rotate for accessibility to all parts of the engine.• Width and length adjustable.• Engine stand's frame elongates to allow adjustment for length between mounting points.Suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Width and length adjustable. Engine stand's frame elongates to allow adjustment for length between mounting points.• Suitable for supporting large multi-cylinder engines (maximum weight 100kg). • The supports can rotate for accessibility to all parts of the engine. • Width and length adj…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

Weight-for-weight, this strap is three to five times stronger than chains and has the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

Attaches to the existing pronged saddle, fitted to our TR, ETJ and TRQ model transmission jacks. This plate will assist in working on fuel tanks, sub frames, transmissions and many other tasks. The chemical resistant rubber pad protects the point of contact. Supplied with four eyelets to fasten down the load onto the plate. Powder Painted to create a durable and rust resistant finish. Features and Benefits • Attaches to the existing pronged saddle, fitted to our TR, ETJ and TRQ model transmission jacks. • This plate will assist in working on fuel tanks, sub frames, transmissions and many other tasks. • The chemical resistant rubber pad protects the point of contact. • Supplied with four eye…

Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. High quality rubber, providing a sturdy and durable point of contact. Secure fit to vehicle, moulded to fit bespoke vehicle fitting. Supplied in a case for easy storage in your vehicle. Features and Benefits • Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. • High quality rubber, providing a sturdy and durable point of contact. • Secure fit to vehicle, moulded to fit bespoke vehicle fitting. • Supplied in a case for easy storage in your vehicle. • Model No. JP27 Specifications Model No J…

High-density plastic with anti-slip steel bar. Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer. Features and Benefits • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (W x D x H): 200 x 475 x 225mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Ma…

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for jacks with a 31-33mm saddle spigot pin.Features and Benefits• A fully adjustable saddle with forward, backward and side-to-side tilt.• Suitable for jacks with a 31-33mm saddle spigot pin.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 3 tonne jack and ADT200 - Maximum capacity is 200kg.• Model No. ADT200SpecificationsModel No ADT200Brand: SealeyCapacity: 200kgCompatibility: 3000CXDNett Weight: 11.19kg