Bits & Sockets Sets

For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. Specifications • Shank Diameter: 1/4 • Dia Metric: 31 &bu more→ll; Cut Length Metric: 13 • Overall Length Metric: 56 • Bearing Dia Metric: 12.7 • Type or Grade: Scribe • Radius 1 Metric: 17

Ideal for speaker cabinets and drawer construction. Please note. This tool cannot be re-sharpened. Inverted use only. Use on MDF and natural timbers. Specifications • Shank Diameter: 1/4 & more→bull; Dia Metric: 42 • Cut Length Metric: 14.3 • Overall Length Metric: 54.5 • Type or Grade: 8 to 12mm • Angle: 45

For door and window construction, decorative panelling and many other joinery applications. Designed for 35mm and 44mm timber thicknesses. Specifications • Shank Diameter: 1/4 • Dia Metri more→c: 36.7 • Cut Length Metric: 9 • Overall Length Metric: 52 • Bearing Dia Metric: 12.7 • Type or Grade: Scribe • Radius 1 Metric: 9

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 66.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 16

Designed for sash bar window construction. Specifications • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 18 • Overall Length Metric: 58 • Radius 1 Metric: 10

Enables curved frames to be moulded. Specifications • Shank Diameter: 1/2 • Dia Metric: 28.5 • Cut Length Metric: 20 • Overall Length Metric: 58.5 • Radius 1 Metric: 17

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 66

Produces an elegant edge mould, or a shallow panel effect when routing on its full width. Specifications • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 15 • Overall L more→ength Metric: 53 • Radius 1 Metric: 6

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metr more→ic: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 63 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metr more→ic: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 54 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. Specifications • Shank Diamete more→r: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. Specifications • Shank Diamete more→r: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Enables biscuit jointing with timber, man-made fibre and particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No.0, 10 & 20. Specifications • Sha more→nk Diameter: 1/2 • Dia Metric: 37.2 • Dia Imperial: 29/64 • Cut Length Metric: 4 • Overall Length Metric: 64 • Bearing Dia Metric: 12.7

Enables biscuit jointing with timber, man-made fibre and particle board. The correct choice of bearing will ensure the correct depth of cut for biscuit sizes No.0, 10 & 20. Specifications • Sha more→nk Diameter: 1/4 • Dia Metric: 37.2 • Dia Imperial: 29/64 • Cut Length Metric: 4 • Overall Length Metric: 64 • Bearing Dia Metric: 12.7

A range of heavy duty 'T' slot cutters for clamping and hanging applications. MEC mechanical feed only. Specifications • Shank Diameter: 3/8 • Dia Metric: 28 • Dia2 Metric: 11.2 &bull more→; Cut Length Metric: 4 • Overall Length Metric: 52 • Radius 1 Metric: 2

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Specifications • Shank Diameter: 3/8 • Dia Metric: 28 • Dia2 Metric: 9.5 • Cut more→Length Metric: 8 • Overall Length Metric: 60

Slots for concealing electric cables etc. A 6mm slot must be cut first to allow for the cutter neck. Care must be taken to avoid breakage. Specifications • Shank Diameter: 1/4 • Dia Met more→ric: 12 • Dia2 Metric: 4 • Overall Length Metric: 53

High quality bits for Phillips screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle more→coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Wera Impaktor holder for the absorption of extreme impulse peaks. Special torsion effect thanks to the double-torsion spring. The Impaktor holder additionally holds long and heavy screws absolutely securely. This enables a rapid and dependable positioning of the screw. Ideal also for overhead work. Should,…

High quality bits for Pozidriv screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle more→coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Wera Impaktor holder for the absorption of extreme impulse peaks. Special torsion effect thanks to the double-torsion spring. The Impaktor holder additionally holds long and heavy screws absolutely securely. This enables a rapid and dependable positioning of the screw. Ideal also for overhead work. Should,…

Set of twist drills with cylindrical shanks (item 410AS). Sizes: 1/16 | 5/64 | 3/32 | 7/64 | 1/8 | 9/64 | 5/32 | 11/64 | 3/16 | 13/64 | 7/32 | 15/64 | 1/4 | 17/64 | 9/32 | 19/64 | 5/16 | 21/64 | 11/32 more→| 23/64 | 3/8"