Effects Pedals

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

Distortion effect pedal for guitar that features ultra-high gain circuitry and produces huge guitar tone which used to be available only from high-gain amps with endless sustain – sound like hard rock/heavy metal distortion of the 80’s. Effect provides dedicated Distortion, Low, High and Level controls, status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Weight (g): 330.0
Package Contents: Manual
Width (mm): 70.0
Battery Type: 9V
Battery Operation: Yes
Type: Equalizer;Distortion
USB: No
Controls: Level;Mid;Dist;Low
…

Double pedal booster for 3 effects designed for lifting pedals to the optimum level that can easy to switch between effect pedals located on Pedaltrain pedalboards. This pedal booster has a solid steel frame and can be installed on a pedalboard using velcro or screws, which are accessories.
Type: Pedalboard
Zip: Yes
Colour: Black
Original Colour by Producer: Black;Black
Variant: PB3
Made in: China

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

The Behringer UC200 Chorus Pedal enhances every aspect of your guitars tone giving it additional richness thickening every aspect of the guitars sound with a chorus effect that can deliver stereo amazement. With individual controls for the Level Tone Rate and Depth you have an impressive amount of tonal shaping options. When the pedal is inactive you can be assured that your full signal integrity is upheld with maximum clarity and accuracy.

Distortion effect pedal for electric guitar that pushes distortion to the extreme by producing crushing, bottom-heavy distortion for modern metal and hard rock. It features gain boost circuitry that delivers super-thick and heavy distortion with low-end punch and endless sustain, dedicated Gain Boost, Distortion, Tone, Bottom and Level controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch for highest signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Boost;Distortion<…

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Compatible with: Boss 500 Series
Type: Dust Cover
Made in: United Kingdom

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Type: Power Supply
Polarity: Center Minus
Current (mA): 1300.0
Plug Type: Barrel
Voltage: 9V
Made in: China

The Behringer UM300 stakes a claim for being the most versatile distortion pedal on the market. The EQ shaping options are a step above most similar units with a sweepable mid boost/cut which allows you to flick back and forth between old school mid-scooped metal tones and much fatter doomier mid-heavy sounds. This is complemented by the astonishing amount of gain this pedal can dish out. Id wager the Ultra Metal has more gain than any player needs but feel free to put this to the test. Always better to have too much than not enough!

Compression/sustain effect pedal for guitar that compress loud and boost low signals without degrading the original sound. Effect provides dedicated Level, Tone, Attack and Sustain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Power Supply: Adapter
Battery Operation: Yes
Type: Sustainer;Compressor
UK/EU Power supply included: No
Made in: China

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Made in: China
Colour: Black
Variant: 1 SPOT
Plug Type: Barrel
Current: 1700 mA
Polarity: Center Minus
Power Supply: Adapter;9V
Current (mA): 1700.0
Type: Adapter
Voltage: 9V
ChargerType: Power Supply
Connector Angle: Straight…

A chromatic pedal tuner. It offers 7 different tuning modes including normal, flat, double flat and chromatic mode. The tuning progress is displayed via a single-digit LED display and an 11-point stream meter. Two additional directional LEDs indicate the required tuning direction. In addition, the tuner is equipped with one ¼'' input, one ¼'' output and a Bypass output. Powered by a 9V battery or a 9V adapter (not included).
Made in: China
UK/EU Power supply included: No

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Made in: United Kingdom
Compatible with: Headrush Mx5
Type: Dust Cover

500mA, 305 cm cable lenght, 9V DC, switchmode power supply, 2.1/5.5mm connector (inside/outside), power LED, polarity minus inside, weight: 142 g
Voltage: 9V
Current: 201-500 mA
Number of Outputs: 1
UK/EU Power supply included: No
Made in: China
Current (mA): 500.0
Plug Type: Barrel
Polarity: Center Minus
ChargerType: Power Supply
Power Supply: 240V

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
UK/EU Power supply included: No
Power Supply: 240V
Plug Type: Barrel
Polarity: Center Minus
Number of Outputs: 1
Made in: China
Current: 701-1000 mA
Current (mA): 1000.0
Voltage: 12V
ChargerType: Power Supply

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Original Colour by Producer: Black;Black
Waterproof: Yes
Made in: Vietnam
Type: Pedal Bag
Handle: Yes
Colour: Black
Strap: Yes;Shoulder Strap
Padding: Yes

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Made in: United Kingdom
Compatible with: Strymon Nightsky / Volante
Type: Dust Cover

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Type: Footswitch
Power Supply: Passive
Colour: Black
Battery Operation: No
Number of Buttons: 3

The Behringer FCV100 V2 Volume and Modulation Pedal is a powerful two-in-one pedal that controls all the dynamics of your playing. Use your foot to alter the volume giving you hands-free control over your level. It also functions as an expression pedal when connected to devices with correct input. With adjustable minimum volume the level of expressiveness is totally up to you; regardless of how you use it though the VCA control ensures reliability and remarkably smooth performance. Expressiveness made easy tailor your dynamics with ease while keeping your hands free.