Power Saws

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models. The ALM Manufacturing Chainsaw Chain has a 3/8in low profile (L/P), 0.043in guide bar slot 0.375mm and low profile (L/P) 1.3mm guide bar slot. Made to fit Black & Decker, McCulloch, Ryobi ranges and suit saws with a 40cm bar and chain with 56 drive links including GK1640KF / Mac 442 / RCS-4040CA.

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models. ALM Manufacturing 61 drive link chainsaw chain Suitable for the following Aldi Gardenline models with a 45cm (18in) bar GLPCS/10

nanoBLADE Wood Speed 65 The nanoBLADE Wood Speed 65 offers fast cutting in wood with a cutting depth of up to 65 mm. A rotating cutting string provides an effortless cutting process with only little vibration. The stable guiding unit ensures precise cutting angles and makes following predefined straight lines easy. The tip actively cuts and therefore supports plunge cutting applications. This NanoBlade is ideal for rough sawing to complete a wide range of DIY projects such as cutting wooden branches or roof laths, or shortening workpieces. It can be used in wood, laminate and also selected plastic materials like PC, PVC, PMMA and WPC. This NanoBlade fits all hand-held NanoBlade saws including …

Makita B-10665-5 Cut-Off Wheel 355mm x 3mm x 25.4mm (Pack of 5) The Makita B-10665 Cut-Off Wheel offers a superb combination of long life and high cutting speed. Applications include Chop saws, Metal cutting, Fabrication, Sheet metal. Specially designed disc for the Makita range of bench cut-off saws incorporating carefully selected grit particles and optimum reinforcement. Suited to metal cutting comes in a pack of 5. Features:
- Offer a superb combination of long life and high cutting speed
- Applications include Chop saws, Metal cutting, Fabrication, Sheet metal
- Specially designed disc for the Makita range of bench cut-off saws Specification:
- Diameter (D): 355 mm / 14 Inch …

This Sirius hole saw set comprises six of the most common sizes required for plumbing work, along with arbors, pilot drills and a plastic carry case. Features and Benefits • Designed to provide plumbers with six of the most commonly needed hole saw sizes • Two arbors and pilot drills • Angled slots help when removing material from hole saws • Padded storage case • Latches keep lid securely closed during transport • Transparent lid for quick identification of contents before starting or leaving a job Contents • 19mm Hole Saw • 22mm Hole Saw • 29mm Hole Saw • 38mm Hole Saw • 44mm Hole Saw • 57mm Hole Saw • Arbor & Pilot Drill Bit …

Adapters . Adapter for guide rail
Adapter for guide rail

Fast and deep plunge cuts in wood and nails (e.g. 80 mm window frames with metal components)
Cutting non-hardened nails, screws and steel profiles with small dimensions (e.g. Concealed metal fixings)
Fast and deep plunge cuts in wooden beams (e.g. Skylight beams)

Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Features:- The Bosch EXPERT Tough Material Hole Saw great all-rounder for every tradesman – because half a hole is not even worth half a hole.- Long Life Cutting Holes in Multi Material- Extreme durability is built in with Bosch Carbide Technology- Individually ground teeth made from fine, hard Carbide- For use with the Bosch Power Change Plus…

Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again.The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features:- Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- For Use With The Bosch Power Change Plus…

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

The 86mm Diameter Hole Saw from C.K Tools is Ideal for DIY Enthusiast and Carpenters alike, this Hole Saw is suitable for cutting steel, die cast metals, nail embedded wood, plywood, hardwood floors, plastic etc. This Hole saw comes with hardened vari-pitched teeth for a fast, clean cutting experience. Constructed from HSS Bi-Metal for longevity. Main Features: 86mm Diameter HSS Bi-Metal Hardened vari-pitched teeth Technical Specification: Diameter Size: 86mm Cut through Steel?: Yes Weight: 315g Specification Sheet 1 Year Guarantee Included