Car Pumps & Compressors

Die-cast body and dial gauge with rubber protector. Fitted with single clip-on connector. Supplied with quick coupling.Tyre Inflator with Gauge• Die-cast body and dial gauge with rubber protector.• Fitted with single clip-on connector.• Supplied with quick coupling.• Range: 0-12bar(0-175psi).• Model No. SA302Model No: SA302:Air Inlet Size: 1/4BSP:Brand: Sealey:Nett Weight: 0.36kg:Range: 0-12bar(0-175psi):PTDSEASA302

All-metal design with braided delivery hose with "lock on" connector for tyres Special nozzle for footballs Rubber pad on foot pedal Display carton All-metal design with braided delivery hose with "lock on" connector for tyres Rubber pad on foot pedal Special nozzle for footballs

The BlueSpot Tyre Inflator (220PSI) allows the easy inflation of tyres up to 220 PSI. The twin-sided push on connector allows for easy access to inner and outer tyre valves on twin wheel vehicles. The lever trigger allows for precise inflation. The air bleed valve allows for the reduction of excess tyre pressure. 1/4" air inlet.

Features: Pump is made of stainless steel , hard to rust, which is non-toxic materials, anti-corrosion and enduring. Fixed filter is not removable when you use it. Dirty filter can be detached, easy to clean. It can transfer diesel oil, fuel water or kerosene and safely. It is forbidden to pump gasoline, alcohol, acid and alkali and other flammable, explosive and corrosive liquids. It is suitable for harvester, large agricultural machinery, construction machinery, big wheel towing and other field operation refueling inconvenient means of transportation and equipment and machinery that cannot reach the gas station refueling. The pump adopts DC 12V/24V DC motor, put 12V/24V plug in a car

This compact mono cylinder foot pump from Bike-it is ideal for the home garage, featuring a pressure range from 0-100 psi it's capable of inflating the most demanding of tyre pressure requirements. TUV approved.

Double action pump complete with adapters.

The Liqui Moly Motorcycle Tire Inflator And Sealer does exactly what it says on the tin - developed to seal flat tyres and pump them back up after a repair.Suitable for all tyre types with and without tubes.Seals flat tyres and pumps them back up after a repairSuitable for all tyre types with and without tubes300mlThe Liqui Moly Motorcycle Tire Inflator and Sealer seals flat Tyres and pumps them back up. This is for use on all Tyre types, with or without tubes.After a repair, drive only at moderate speed. The Tyre must be reconditioned or replaced at the next opportunity. Do not use if the tube is torn or if the Tyre has slipped off the rim or if the outer cover has a lateral tear. IMPORTANT: T…

Die-cast body and dial type gauge with rubber protector. Fitted with single clip-on connector.Tyre Inflator with Gauge• Die-cast body and dial type gauge with rubber protector.• Fitted with single clip-on connector.• Range: 0-12bar(0-175psi).• Model No. SA332Model No: SA332:Air Inlet Size: 1/4BSP:Brand: Sealey:Nett Weight: 0.288kg:Range: 0–12bar(0–175psi):PTDSEASA332

[Quick and Efficient Tool]Our new upgraded style siphon bulb only starts a stream of siphoning liquid in 5 seconds, which is faster than those old ones which require 60 seconds or more time. And with the expanded hose (ID: 11mm, OD 15mm), our siphon pump can transfer up to 3.5 gallons of liquid per minute, making your job easier and saving you time. [Easy to Use]This lightweight and portable manual siphon fuel pump has an arrow to indicate the direction of the fluid, which is easy to use. Connect the PVC pipes, put the upper tube into the fuel tank, a few presses of the bulb will start the fluid flow, put the lower tube into the container, and the fluid will flow automatically (the source

Bosch Miscellaneous Part Original Manufacturer

GB1021914-01 Quick Release Plug without Valve by Zoro Select

Description: Product color: black Rated voltage: 12V Rated power: 120W Maximum air pressure: 100PSI Pressure flow rate: 30L/Min Cylinder specification: 1X30mm Product size: 16*8*14CM Material: ABS, metal Applicable car: 12V car universal Packaging: 1 Set Note: Due to manual measurement, please allow an error of 1-3mm. Please ensure that you do not mind before bidding. Due to the differences between different monitors, the images may not reflect the actual color of the item. Please refer to the actual image received. Thank you very much. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and

Hign-concerned Chemical : None Origin : Mainland China Certification : none Description : *ONT WASTE YOUR MONEY ON MORE EXPENSIVE COMPLICATED MACHINES! FIND YOUR LEAKS IN LESS THAN 5 MINUTES AND SAVE! *EVAP Smoke Machine Diagnostic Emissions Vacuum Leak Detection ECONOMY tester! *Most economic and practical smoke machine available! *No annoying or silly compressor or fluids needed! Only cigar! *Solve those pesky P0442 P0445 P0446 codes yourself and save hundreds! *Color：Yellow+Blue *Material:plastic Solve these error codes!: P0171 - Fuel System Too Lean (Bank 1) P0174 - Fuel System Too Lean (Bank 2) P0440 - Evaporative Emission Control System Malfunction  P0441 - Evaporative Emission

Bosch 30_1414618027 Good Bosch 1414618027 Spring

Bosch Miscellaneous Part Original Manufacturer

Bosch 30_3391250246 Good BOSCH 3391250246 Spring

These Twin Hold-on Connectors are suitable for inflation of twin tyres. A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre's valve allowing air to flow into the tyre. The handles on these connectors are red in colour. Twin Hold-on Connector. Inlet size Rp 1/4.