Batteries for Drones & RC models

Features: Reliable, interference-free 2.4GHz AFHDS signal operation. Easy to bind and very fast link-up, quick and extremely stable in performance. AFHDS 3CH Receiver. Only 6.5g in weight and 37.6*22.3*13mm, Ultra-lightweight design. Suit for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S transmitter, great for RC cars/Boats. Specifications: Brand: Flysky Product Model: FS-GR3E PWM channels: 3 Wireless frequency: 2.4GHz Wireless protocol: AFHDS Range: 100～200m (ground) Antenna type: single antenna (150mm) Failsafe: yes (channel 2) Bind port: yes (channel 3) Power port: yes (VCC) Power: 4.5-6.5V DC Model type: car/boat Temperature range: 0 ℃ — + 60 ℃ Size: 37.6*22.3*13mm Weight: 6.5g

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

2.4G FS-GT2 2CH Radio Model RC Transmitter & Receiver Car Boat Features: Super active and passive anti-jamming capabilities. Very low power consumption. High receiving sensitivity. Work between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points. Use a linear spread of fine paragraph by an excess antenna. It covers the entire band width of the antenna bandwidth range. Has its own unique ID, increase the anti-jamming capability and stability. Specifications: Transmitter: Channels: 2 Channels Model Type: Car/Boat RF Power: Less than 20dbm Modulation: GFSK Code Type: Digital Sensitivity: 1024 Low Voltage Warning: Yes (less than 9v) DSC Port: Yes Charger Port: Yes Power: 12V DC

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

This product is specially developed for remote control cars and boats. It supports multi-device and multi-user simultaneously with fast response speed and strong anti-interference ability, very low power consumption and high receiving sensitivity. Special speed limit function. Besides, TG-3 2.4Ghz remote system with intelligent design, can be widely used. Let beginners can control the car or boats within limited speed range. It also has a special throttle limit switch! Features: High receiving sensitivity. 3CH remote control for RC cars and boats. Multi-device and multi-user simultaneously. Built-in design of the antenna in the transmitter. Very low power consumption, and stable

The Trailer comes with two rubber tyres made of high quality material is specially designed and manufactured for?Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car?to enjoy DIY delight. Feature: Make your RC car more vivid and attractive. Made from high quality metal, durability in use. Novel appearance, exquisite workmanship and?unimaginably perfect. Good choice for children to experience DIY delight and exercise the ability. Suit for 1/10 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car. Any problem, please contact our store without hesitation. Honor to serve you. Specifications: Item name: Trailer Car Quantity: 1pcs Main material: Metal Color: Black

The Trailer comes with two rubber tyres made of high?quality material is specially designed and manufactured for Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car to enjoy DIY delight. Feature: Make your RC car more vivid and attractive. Made from high quality metal, durability in use. Novel appearance, exquisite workmanship and unimaginably?perfect. Good choice for children to experience DIY delight and?exercise the ability. Suit for 1/10 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10?D90 HPI RC Crawler Car. Specifications: Item name: Trailer Car Quantity: 1pcs Main material: Metal Color: Black Weight: About 463g Item size: 29 * 21.5 * 13cm Suits for: 1/10 Traxxas HSP Redcat

This product is specially developed for remote control cars and boats. It possesses super active and passive anti-jamming capabilities, very low power consumption and high receiving sensitivity. Let the beginners can control the car within limited speed range! It has a special Throttle limit switch! Features: 4CH remote control for RC cars and boats Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands It covers the entire band width of the antenna bandwidth range High receiving sensitivity. Super active and passive anti-jamming capabilities Built-in design of the antenna in the transmitter Ergonomically inclined rudder design, soft rubber handle, can relieve hand

Features: Good performance digital?servo, suitable for remote control, RC car, robots. Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60 degrees - 0.17sec/60 degrees , peak stall torque: 29.5kg.cm - 32kg.cm. Size: 40.0*20.5*40.5mm, horn gear spline: 25T, Diameter: 5.9mm, gear type: 5 metal. A great choice for university professors and students who are interested in developing software for robot parts. Tailored for RC hobbyists to provide different experiences and delight. Warranty: If there are any problems, please contact our store in time. We will give you a satisfactory solution. Specifications: Item: Digital Servo 30KG Servo 180 Degree: Apply Environmental Conditon: 1. Storage

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Specification Bland: BANDAI Product: GUNDAM DECAL No.115 for RG 1/144 SINANJU Type: Water Decal Set Contentes: Main Body Please note that photos shown may differ from the final product.

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Product Features Brand: Kyosho Type: Option Parts Compatible Brand: For Kyosho

Features: Easy to use, labor saving, and easy to handle and expand the use of the trimming machine at the same time. Easy to adjust, threaded hex wrench in every corner to help you level and easily adjust the roadside plug-in. Convenient center hole bushing for aligning the router to the center of the drill hole. It is easy to use and makes the job work very well. Made of aluminum alloy countertop and plastic router insert ring, not easy to rust, suitable for long term use. Specifications: Material: Aluminum alloy + plastic ring Thickness: 9.5mm / 0.37in Internal Hole Diameter: 73mm / 2.87in Item Size: 300 * 235 * 9.5mm / 11.80 * 9.25 * 0.37in Item Weight: 1200g / 42.33oz Package Weight:

Scale:1/24 *Please note that photos shown may differ from the final product. *This product requires assembly (An adhesive may be necessary). *The image is being painted for the shooting.

Product Features Brand: Kyosho Type: Option Parts Required Assembly: Unassembled Kit Material: Polycarbonate Vintage: No

2PCS High Grip 2.2 Inch RC Rubber Tire Alloy Beadlock Rims?Wheel Upgrade Parts for Traxxas Hsp Redcat Rc4wd Tamiya Axial scx10 D90 Hpi RC Crawler. Features: Suitable for 1/10 Traxxas Hsp Redcat Rc4wd Tamiya Axial?scx10 D90 Hpi RC Crawler. Unique design, exquisite workmanship and perfect?appearance. Economical way to give a big visual upgrade to your?vehicles profile. Made of high quality metal and rubber, light weight, good?heat dissipation and stability. Shock-proof and high crush-resistant, just enjoy the?unprecedented RC delight. Specifications: Item name: Crawler Wheel with Rim Material: Metal and Rubber Quantity: 2pcs Color: Silver?& Black Wheel Diameter: 120mm Rim Diameter: 60mm

Main country of manufacture: Japan Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Use it in place of the T3 parts of standard equipment. It is a part where handling characteristics can be changed by changing the geometry of only the Acker by adding and changing the steering pivot. Two types of steering pivots are available: mild (8.0 mm width: kit standard) and quick response (8.5 mm width). Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.