Batteries for Drones & RC models

Boy direction Target Age: From age 15 Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Features: The FGr4P uses AFHDS 3(Third Generation Automatic Frequency Hopping Digital System). It uses a single antenna with two-way transmission capabilities and is designed to be compact and easy to install. It can output standard PWM, i-BUS, and PPM. Suitable for AFHDS3 system remote controller. Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing. Any problem, please contact our store without hesitation. Honor to serve you. Specification: Product Model: FGr4P PWM Channel: 4 Wireless Frequency: 2.4GHz Wireless protocol: AFHDS 3 Range:> 200m (ground) Antenna type: single antenna (150mm) Power: 3.5-8.4V RSSI: Supported Data port: PWM / PPM / i.bus

Scale:1/24 *This product is a plastic model that needs assembly and paint. *Adhesives and tools are required for assembly. *Products in the image are painted for shooting.

Features: 3CH remote control for RC cars and boats. Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands. It covers the entire band width of the antenna bandwidth range. Adopts AFHDS (Automatic Frequency Hopping Digital System). High receiving sensitivity. Super active and passive anti-jamming capabilities. Very low power consumption, and stable performance. LCD screen display. Specifications: Transmitter: Channels: 3 Mode type: car / boat RF range: 2.4-2.48GHz Band width: 500KHz Band: 160 RF power: less than 20dBm 2.4G system: AFHDS Code type: GFSK Sensitivity: 1024 Low voltage warning: yes (less than 9V) DSC port: 3.5mm (output: PPM) ST range: 90 degrees (L: 45, R:

Features: Performance: With anti blocking and anti burning protection function, with waterproof function. CNC precision gear, it is more wear-resistant and not easy to break and sweep teeth. Replacements for 1/5 Traxxas ARRMA KRATON BAJA RC car parts robot boat helicopter. Great choice for university professors and students who are interested in developing software for robot parts. If there are any problems, please contact our store in time. We will give you a satisfactory solution. Specifications: Item: 80kg Digital Servo Number of Teeth: 15T Rotation Angle: 180 ° Deadband: 3 μ s Operating Frequency: 1520 μ s / 330hz Motor: High Performance Iron Core Motor Speed (6V): 0.17sec/60 °

TARGET SEX: boy Main Country of origin: Japan Please be sure to take a look at the product's more than a few things to be sure to look at before you make a deal! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

※This product does not include a power supply unit. Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Scale:1/350 *Please note that photos shown may differ from the final product. *This product requires assembly (An adhesive may be necessary). *The image is being painted for the shooting.

Scale:1/24 *Please note that photos shown may differ from the final product. *This product requires assembly (An adhesive may be necessary). *The image is being painted for the shooting.

Features: iMAX B6 AC RC charger 80W balance charger. Max. charge power 80W, max. discharge power 5W. Suitable for NiCd / NiMH battery cell count: 1~15 cell, Li-Ion / Polymer cell count: 1~6 series. Safe to use, reverse polarity protection, short circuit protection, overcharge protection, over-temperature protection, over current protection. Specifications: Oeration Voltage Range: DC 11.0 ~ 18.0 Volt or AC 100V ~ 240V 50/60Hz Circuit Power: AC to DC adaptor (DC 11.0 ~ 18.0V / 5A) Max. Charge Power 80W Max. Discharge Power 5W Charge Current Range : 80w: 0.1~6.0A 50w :0.1-5.0A Discharge Current Range : 80W:0.1~2.0A 50W:0.1-1A Current Drain for Balancing Li-Po : 300mAh/cell NiCd / NiMH battery

GMr is a 4-channel micro/mini car receiver, using AFHDS 3 (third-generation automatic frequency hopping digital system), single external antenna bidirectional transmission, micro size, and reserved gyro interface. The GMR receiver is compatible with RC racing cars and drifting mini cars. Features: * This 2.4CHz receiver with 4-channel is suited to DIY your RC car especially high-speed cars such as RC racing cars and drifting mini cars. * The receiver is compatible with PL18/NB4 and NB4 Lite all the transmitters which with AFHDS 3 protocol. realizing a strong anti-interference ability and quick response within 5ms, accurate response to weak signals, and active avoidance of co-channel

The Engine Simulated Sound Module is specially designed for1/10 RC Crawler Off-road Car Features: Lightweight, Mini size. Easy to install and operate It is specially tailored for 1/10 RC Crawler Off-road Car Built-in higher efficiency amplifier, lower power consumption and more power saving  Equipped with 58 different sound effects from engine, brake, reverse car to danger alarm You can freely set what you want through software parameters like throttle response time, braking time, sound volume   Specification: Power Amplifier: Input Voltage: 7-25V                              Max. current: 2A Controller Connecting Line: Input Voltage: 4.8-5.0V                  

Basic specifications: a set of one-way housing (L/R), ball defling gears, bearing spacers, etc. When power is on, traction is drawn, and when power is off, turning off the rotating wheels of the front and rear wheels to achieve no-speed cornering By incorporating left-right one-way boring, it creates even smoother rotation ※In TT-01R, it is necessary to replace the cup joint with the OP.590 TB-01 reinforced front one-way cup joint. Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

Main countries of origin: Japan Please be sure to take a look at the product's more than a minute's reading and what to look out for before you make a product! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

The rated capacity is 1600 mAh, the voltage is 7.2 V, the size is 135 x 47 x 25 mm, and the weight is about 310 grams. It is suitable for fast charging, has good discharge properties, and has enough capacity. It has a power feature that is easy to manage and is perfect for beginner drives. You can use it in a wide range of ways, from on-road vehicles to offroad buggies without having to choose a vehicle type. This is a 7.2V Nikard for the electric Radio Controlled model. package weight: 0.33 kg Be sure to check the product description below and the points to keep in mind when you buy before you buy! To request a return or exchange, please note that it is mandatory to provide a video

These high quality 1.9 inch 1/10 tires are suitable for 1/10 RC Traxxas D90 SCX10 AXIAL RC4WD TF2 Rock Crawler. With its terrific quality and performance, it can satisfy the needs of the racers. So come and take it home, excellent choice will let you enjoy more fun. Features: Fine workmanship and perfect style Wider tires increase the wheel stability Upgrade solid wheel rim made it more durable True beadlock wheels-no gluing, convenient to change the tires or wheels Large, deep lugs provide exceptional traction in rock, mud, and dirt These tires are made of super soft compounds for good grip over all kind of terrain Designed for 1/10 RC Traxxas D90 SCX10 AXIAL RC4WD TF2 Rock Crawler

Airbrush system series A convenient stand that is essential for improving the efficiency of airbrush painting Durable metal holds 2 airbrushes securely Since the main body of the stand is fixed to the end of the desk with a clamp, it can be installed according to the work environment Tamiyaze HG airbrush compatible with various airbrush and airbrush light series Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.

The FTr8B receiver adopts Flysky the third generation automatic frequency hopping digital system (AFHDS 3), which Features dual antennas and bidirectional data transmission commonly known as telemetry plus an i-bus out/s.bus terminal and PWM/PPM switching at Channel 1. Compatible with all AFHDS 3 transmitters and RF modules. Features: The FTr8B receiver is compatible with all AFHDS 3 transmitters and RF modules (including PL18, NB4, NB4 Lite, FRM302, etc.) This product can be equipped with RC toys such as fixed-wing, glider, helicopter, delta wing engineering vehicle, etc. Adopting Flysky the third generation automatic frequency hopping digital system (AFHDS 3), the FTr8B receiver is

Scale:1/350 *Please note that photos shown may differ from the final product. *This product requires assembly (An adhesive may be necessary). *The image is being painted for the shooting.

Dancing Wings Hobby E1101 Lighting 1060mm Wingspan EPP Flying Wing RC Airplane Training KIT Note:?This item is the KIT version, not includes any electronic devices. Features: How to play: turn on the airplane, then throw it into the air, control it by a remote control 1060mm wingspan for good stability EPP material to resist crash Simple structure, easy to install Easy to control, suitable for new players to improve flying skills Specifications: Brand Name: Dancing Wings Hobby Item Name: Lighting Flying Wing? Material: EPP Wingspan: 1060mm Length: 550mm Flying Weight: 230-280g Propeller: 6030 Suggested Power System: Electric Motor: MM1908 2050KV ESC: 20A Servo: 9g * 2pcs BATT: 2S 800mAh

Features: Good performance digital?servo, suitable for RC car, robots. Precision gears, more wear-resistant, not easy to collapse and sweep teeth, etc. Including steering gear accessories package, spare gear and shaft pin, 25t metal steering gear arm. A great choice for university professors and students who are interested in developing software for robot parts. Tailored for RC hobbyists to provide different experiences and delight. Warranty: If there are any problems, please contact our store in time. We will give you a satisfactory solution. Specifications: Item: Digital Servo 25KG Servo 180 Degree: Number of Teeth: 25t Speed (6V): 0.08sec/60 degrees Speed (7.4V): 0.07sec/60 degrees

The package includes 4pcs tires. The tires are suitable for 1/10 RC Rock Crawler Traxxas Trx-4 Trx-6 Axial Scx10 90046. Full strong metal wheels rims hub can give good support for the tire. Features: The tires use advanced design and rubber materials to provide incredible grip ability and can perform well in any terrain. Travel on different terrains, such as beaches, roads, grass, deserts, etc. Full strong metal wheels rims hub can give good support for the tire. Wheel outer diameter is 125mm, wheel width is 43mm. The tires are suitable for 1/10 rc rock crawler Traxxas Trx-4 Trx-6 axial scx10 90046 RC4WD. Easy to install the tires, the tough tires will provide a strong surface grip, DIY

Product Features Brand: Kyosho Type: Oil Damper Color: Multi-Color Age Level: 14+ Custom Bundle: No Modified Item: No

Target gender: boy Major Country of Manufacture: Japan Be sure to check the detailed product description at the bottom and precautions before purchasing! To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.