Diamond Core Bits & Milling Cutters

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increas more→ed cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

The Faithfull 9 Piece Plumbers Professional Holesaw Set contains the six most frequently used plumbers holesaw sizes, along with two arbors and an adaptor. These high speed steel bi-metal saws have sp more→ecially hardened variable pitch teeth for fast smooth cutting. Bi-metal saws offer increased safety as they will not shatter under load. These holesaws are used to cut perfect holes in a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills. Supplied in a sturdy zip-up case. Contains 6 x Varipitch Holesaws 19, 22, 29, 38, 44 and 57mm. 1 x 3/8in Hexagon Arbor for Holesaws 14-30mm.…

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution fo more→r cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 44mm & more→bull; Compatible Arbors: 2L, 3L, 6L, 7L Features and Benefits • Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removal Contents • Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal materi more→al with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth 38mm

Bahco Sandflex Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneumatic more→tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 23mm • Shank Diameter: 25mm • Length of Cut: more→25.5mm • Overall Length: 101.5mm • Square End Helix Angle: 30°

Lasts up to 50x longer than HCS hole saw in tough materials - Cutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Fe more→w hole saws can withstand this kind of work in a mixture of tough construction materials, but the EXPERT Construction Material can. This one hole saw serves, and lasts, for many jobs. With just a few huge carbide teeth on its steel body, the EXPERT Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an …

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 6.35 • Dia2 Imperial: 1/4 • Overall Length Metric: 100 • Type or Grade: TCT

The Faithfull 9 Piece Electricians Professional Holesaw Set contains the six most frequently used electricians holesaw sizes, along with two arbors and an adaptor. These high speed steel bi-metal saws more→have specially hardened variable pitch teeth for fast smooth cutting. Bi-metal saws offer increased safety as they will not shatter under load. These holesaws are used to cut perfect holes in a wide variety of materials including wood, chipboard, plywood, non laminated plastics, plasterboard and non ferrous metals. Suitable for use in most variable speed power drills. Supplied in a sturdy zip-up case. Contains 6 x Varipitch Holesaws 16, 20, 25, 32, 40 and 51mm. 1 x 3/8in Hexagon Arbor for Holesaws …

Holesaws HSS, Bimetal.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break more→:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left}.tg .tg-0lax{text-align:left;vertical-align:top} Product Code Part Number A Weight mm " mm g 004500016 450 16 16 (5/8) 57 21 004500017 450 17 17 (11/16) 57 32 004500019 450 19 19 (3/4) 51 30 004500020 450 20 20 - 51 29 004500021 450 21 21 (13/16) 51 37 004500022 450 …

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 16 • Dia Imperial: 5/8 • Dia2 Metric: 6.35 • Dia2 Imperial: 1/4 • Overall Length Metric: 100 • Type or Grade: TCT

Lasts up to 50x longer than a BiMetal hole saw in tough materials - Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind u more→ntil their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again. Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch EXPERT Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and me…

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plasti more→cs, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

ore drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.Specifications:- Ø: 27,0 mm- Total length L1: 88,0 mm- Sha more→nk Ø: 19,0 mm- For machines: RU25 / RU40- Material: HSS- Surface: Bright- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 55,0 mm- Weight: 0,17300 Kg

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 48mm & more→bull; Compatible Arbors: 2L, 3L, 6L, 7L Features and Benefits • Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removal Contents • Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

Cuts the Hardest Tiles - The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic m more→aterials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. It is suitable for use with corded and cordless drill drivers. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. …

Sheet Steel Holesaw Set 20, 25 & 32mm~ Tooth configuration optimised for the fast cutting of sheet steel~ Cuts sheet steel faster than standard hole saws~ 8 teeth per inch for a smoother cutting actio more→n~ Cleaner holes with no burring~ Premium grade 8% Cobalt Alloy Steel construction for an extended working life~ Slimline design reduces frictional heat build up and prevents tooth burn out~ Compatible with impact drills ~ E6,3 Drive System~ Flared shoulders prevent overdrilling ~ avoids damaging inner components of electrical cabinets and junction boxes~ Contents: 20, 25 & 32 mmTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: …

Lasts up to 50x longer than a BiMetal hole saw in tough materials - Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind u more→ntil their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again. Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch EXPERT Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and me…

DeWalt professional grade carbide toothed hole saws for metal. Lasts 10x longer than bi-metal hole saws. The carbide teeth cut accurately and cleanly into all types of metal and the single piece desig more→n ensures increased stability and durability. Features & Benefits • For cutting stainless steel, ferrous and non-ferrous metals • Carbide Teeth provides smooth, clean cuts and 10x longer life • Anti slip shank prevents rotation in the chuck and ensures optimum force transmission Specifications • Diameter: 51mm • Pack Quantity: 1

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 19.1 • Dia Imperial: 3/4 • Dia2 Metric: 6.35 • Dia2 Imperial: 1/4 • Overall Length Metric: 96 • Type or Grade: TCT

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 26mm • Shank Diameter: 25mm • Length of Cut: more→27mm • Overall Length: 95mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Two flutes • Multidirectional