Diamond Core Bits & Milling Cutters

The Bahco Contractor's Bi-Metal Holesaw Set contains Sandflex bi-metal holesaws that are specifically designed for metal cutting but can also be used in most materials such as wood and plastics. Bi-me more→tal construction with 8% cobalt. Supplied in a handy plastic case. This 11 Piece Set contains 4 x 20mm Holesaws 4 x 25mm Holesaws 1 x Arbor* 2 x Replacement Drill Bits Specification Max. Cutting Depth 38mm *Arbour requires a power drill with 10mm chuck.

The Evolution Broaching Cutter Kit is manufactured from fully ground M2 steel. They offer increased quality and performance. Suitable for use in magnetic drills and will fit most makes.

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increas more→ed cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

Bosch 2608584670 HSS-Bimetal Progressor Holesaw Kit 9 Piece The Bosch 9 Piece HSS-Bimetal Progressor Holesaw Kit contains 6 holesaws in sizes from 20mm to 64mm or 25/32 inch to 2.1/2 inch. Suited to c more→utting both wood and metal they are made with 8% Cobalt Alloy. Features:
- Progressor holesaw kit for wood and metal
- For the toughest demands - quickly and steadily through a wide variety of materials
- Progressive tooth strip for high performance and fast chip clearance
- HSS bi-metal with 8% cobalt alloy for extreme resilience and a long lifetime
- Power change adapter for a fast and safe attachment and release of the pilot drill bit and holesaw, with just one click
- The cutting …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution fo more→r cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

Engineered for precision and durability, this high-performance slot drill is designed for professional machining applications. The solid carbide construction ensures exceptional hardness and wear resi more→stance, making it suitable for milling a variety of materials including stainless steel, aluminium, and titanium. The TiALN (Titanium Aluminium Nitride) coating enhances the drill's performance by reducing friction and heat, allowing for faster cutting speeds and extended tool life. The Weldon shank design provides increased stability and grip in tool holders, ensuring precise and efficient milling operations. Product Operations • Shallow shoulder milling • Deep shoulder milling • …

The Lenox T3 Bi Metal Speed Slot Hole Saw features a patented vari-tooth design which optimises cutting for fast cuts and long tool life. The increased wall thickness improves durability and minimises more→tooth loss, optimised tooth design penetrates metal with ease. Features & Benefits • 50% longer life. 2X more durable • 10% thicker wall adds strength and durability • Improved metal cutting performance • Increased wall thickness improves durability and minimizes tooth loss • Optimized tooth design penetrates metal with ease • Fast, efficient cutting in wood • Larger, sharper teeth remove more wood for fast cutting • Easy plug removal • Speed Slot staircase …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications Diameter …

These diamond tile drill bits are designed for use with angle grinders that have a circumferential speed of 80 m/s and an M14 mounting, making them suitable for use with a wide variety of commercially more→available machines. The accessory simply screws on to the M14 thread on the grinder. The set contains a selection of standard metric diameters, with which numerous jobs on porcelain stoneware, tiles and natural stone can be carried out effortlessly and precisely. They are perfect for installing fittings, attaching shelves or cabinets, mounting accessories or decorations in the sanitary area, kitchen and tiled surfaces. Comes packaged in an Einhell "M" case, complete with an inlay that keeps the …

Hole Saw Kit 6 pc~ Premium grade 8 % Cobalt alloy steel construction for an extended working life~ Excellent wear resistance even at high temperatures~ For fast and clean cutting of metal, wood, alumi more→nium, steel, cast iron, brass and plastics~ Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibration~ Contents: 1 x holesaw, sizes: 40, 54, 65, 67 & 68mm. Quick release arbor 32-152mm (11mm shaft)Technical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC FreeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders …

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 26mm • Shank Diameter: 25mm • Length of Cut: 43mm • Overall Length: 101.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313.Core drill made more→of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.Specifications:- Ø: 20,0 mm- Total length L1: 145,0 mm- Shank: Ø 19,0 mm - For machines: RU40- Material: HSS- Surface: Bright- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 110,0 mm- Weight:0,22100 KG

Can be used on all track drilling machines. The cutting geometry has been specially optimized for heavy duty chip removal from railway tracks, thus makes efficient use possible.Core drills with tungst more→en carbide cutters. Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acid-resistant steel.Specifications:- Ø 33,0 mm- Total length L1 63,0 mm- Shank Ø 19,0 mm for machines A10 / RU25 / RU40- Material Tungsten carbide- Surface Bright- Cutting direction right hand cut- Shank Weldon shank- Cutting depth 30,0 mm- Weight 0,12000 KG

Features and Benefits • New tooth material for enhanced heat and wear resistance, improving product longevity • Tried and tested tooth design • Increased hole saw depth • Aggresive more→material penetration • Included carry case

Features:- Exceptional durability is built in with Bosch Carbide Technology.- Individually ground teeth made from fine, hard Carbide.- Special slot design for better view and plug ejection.Expert Toug more→h Material For Long Life Cutting Holes In Multi Material:- Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and - until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Specifications:- Diameter (D) mm: 152- Working length mm: 60Materials:- Wood with metal- Br…

Made from premium high-speed steel (HSS), this countersink delivers exceptional cutting performance and long-lasting sharpness. Featuring a 3-flute design, the Dormer G106 ensures smooth, chatter-free more→operation, providing a clean and accurate 90° countersink on various materials, including steel, aluminium, wood, and plastics. The 3-flute configuration enhances chip removal, reducing clogging and increasing efficiency for faster and more precise work. The 90° angle of the countersink is ideal for creating countersunk holes for flat-head screws, ensuring a flush finish for a professional appearance. The durable construction of the Dormer G106 guarantees reliable performance even under …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications Diameter …

Hole Saw Kit 6 pc Downlight~ Premium grade 8 % Cobalt alloy steel construction for an extended working life~ Excellent wear resistance even at high temperatures~ For fast and clean cutting of metal, w more→ood, aluminium, steel, cast iron, brass and plastics~ Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibration~ Contents: 1 x holesaw, sizes: 65, 70, 76 & 83mm. Quick release arbor 32-114mm (11mm shaft). Hexagon key 4mmTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC FreeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety …

Bahco Superior Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round ro more→d which is fusion welded to the back material, the tip is then ground to its final shape with a 5 positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-159-C Carded. Size: 159mm.

Core drills with tungsten carbide cutters. Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acid-resistant steel.For use in more→magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.Specifications:- Ø: 32,0 mm- Total length L1: 84,0 mm- Shank Ø: MK 2 / 3- machines: RU25 / RU40- Material: Tungsten carbide- Surface: Bright- Cutting direction: right hand cut- Shank: Gewindeaufnahme- Cutting depth: 55,0 mm

Length: 165mm, Fitment: " BSP Female

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a more→10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

Long Life For Hard CeramicsFeatures:- Diamond Cutter Dry Speed Delivers Long Life When Dry Drilling Hard Ceramics- Vacuum-Brazing Technology Ensures Long Lifetime- High-Class Diamonds Provide Very Hig more→h Drilling Speeds- With 22.23 Mm Bore For Standard Locking Nut Angle Grinders.Specifications:- Materials: Hard Tiles,Hard Stone,Lime And Sand Bricks,Solid Brick- Diameter (D) Mm: 51- Diameter (D) Inch 2- Working Length (L1) Mm 35