Diamond Core Bits & Milling Cutters

Holds Router Bits - The Collet holds router bits. The correct Collet size must be used at all times to avoid danger when operating. Do not use on shank sleeves. Features and Benefits • Holds Rou more→ter Bits • Collet holds router bits • Correct Collet size must be used at all times to avoid danger when operating Specifications Diameter: 1/4" Key width: 19mm

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 5 more→.5 • Dia Imperial: 7/32 • Cut Length Metric: 19 • Overall Length Metric: 51

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 121 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 7 more→.5 • Dia Imperial: 19/64 • Cut Length Metric: 19 • Overall Length Metric: 51

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 19 • Overall Length Metric: 51

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting length bearing guided trimmer for bringing decorative lam more→inates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates on thin stock, ideal for pattern making or replicating components. Narrow diameter ideal for following tighter curves on more intricate work. 1/4in shank for easy control in smaller routers with K mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • …

These cutters are for Trend Craft Dovetail Jigs. Specifications • Shank Diameter: 12 mm • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric more→: 65 • Angle: 97

The BOSCH PROFESSIONAL POF800/GOF900 6mm Spring Clamp Grey is a versatile and durable tool designed for garden and terrace applications, particularly for attaching and securing parasols and awnings. T more→his spring clamp is made from high-quality materials, ensuring its robustness and longevity.With a 6mm opening, this clamp provides a strong grip on various materials and surfaces. It features a reliable spring mechanism that allows for easy and quick attachment and detachment, providing convenience and efficiency during setup and disassembly of parasols and awnings.The grey color of the spring clamp adds a touch of sophistication, blending seamlessly with any outdoor decor. Its compact size makes …

Lasts up to 50x longer than a BiMetal hole saw in tough materials - Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind u more→ntil their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again. Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch EXPERT Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and me…

These cutters are for Trend Craft Dovetail Jigs. Specifications • Shank Diameter: 8 mm • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: more→65 • Angle: 97

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 8 more→• Dia Imperial: 5/16 • Cut Length Metric: 19 • Overall Length Metric: 52

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution fo more→r cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

9 Piece Professional Holesaw Kit manufactured from a bi-metal material with hardened teeth made from high speed steel and a variable tooth pitch for fast smooth cutting. Supplied in a sturdy zip-up ca more→se. Contains: 6 x Holesaws: 19, 22, 29, 38, 44, 57mm2 x Arbors: 7/16in Hex, 3/8in Hex1 x Arbor Adaptor Features: Bi-metal material with hardened teeth 6 x holesaws: 19, 22, 29, 38, 44, 57mm 6 x holesaws: 19, 22, 29, 38, 44, 57mm 2 x arbors: 7/16in Hex, 3/8in Hex Includes arbor adaptor and a sturdy zip-up case Specifications: Dimensions: H:21.5 x W:6.0 x D:18.0 cm Colour: Multi Guarantee:5 years Material: Steel Model Number: FAIHSKIT

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plasti more→cs, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes more→. *6mm shank.

Depth 55mm. Cbn Grinding. For Magnetic Base Drill Presses And Foot Drills With Morse Taper Connection, Using Adapter 108 302 / 108 303. (Ruko Drills Rs 20, Rs 30). Suitable For Drilling Beams And Shee more→ts Of Steel, Cast Steel, Light And Non-Ferrous Metals. Great Cutting Power And Long Life. Translucent Plastic Case With Hanger.Specifications: - Ø (Mm): 16- Ø Stem (Mm): 19- Number Of Teeth: 5

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine.• HSS End Mill ø16mm for SM2502.One of a comprehensive range of high quality accessor more→ies for Model No. SM2502 mini drilling/milling machine.• One of a comprehensive range of high quality accessories for Model No. SM2502 mini drilling/milling machine. • Model No. SM2502EM16Technical Specification:Description: HSS End Mill ø16mm 2 FluteNett Weight: 0.09kgDimensions: Length: 30mm x Height: 30mmWeight: 0.12KgWarranty: Consumable

Holesaws HSS, Bimetal.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break more→:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left}.tg .tg-0lax{text-align:left;vertical-align:top} Product Code Part Number A Weight mm " mm g 004500016 450 16 16 (5/8) 57 21 004500017 450 17 17 (11/16) 57 32 004500019 450 19 19 (3/4) 51 30 004500020 450 20 20 - 51 29 004500021 450 21 21 (13/16) 51 37 004500022 450 …

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Specifications: - Ø: 22,0 mm- Total length L1: 63,0 mm- Shank Ø: 19,0 mm- For machines :A10 / RU25 / RU40- Material: HSS- Surface: Bright- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm- Weight: 0,11400 Kg

HSS Cobalt Hole Saw 114mm 4.1/2in~ Premium grade 8 % Cobalt alloy steel construction for an extended working life~ Excellent wear resistance even at high temperatures~ For fast and clean cutting of me more→tal, wood, aluminium, steel, cast iron, brass and plastics~ Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibrationTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders are advised to wear safety gogglesDimensions: Length: 114mm x Height: …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 32 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 74

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 59

Trend Trade Straight Cutter - 15mm diameter 15mm diameter x 25mm cut length for heavy duty slotting grooving and rebating with templates, side fences or in a router table using a 1/2in shank router. more→Centre tip design for drilling and stopped cut applications for premium results in all materials. High quality micro-granular tungsten carbide cutting edges for maximum performance and durability on laminate, chipboard, ply, MDF and solid timber. K mark shank to ensure safe working practices. Supplied in a storage tube for maximum protection when transporting from job to job. Specifications • Shank Diameter: 1/2 • Dia Metric: 15 • Cut Length Metric: 25 • Overall Length Metric: …