Diamond Core Bits & Milling Cutters

Trend 6.3mm diameter Solid Tungsten Carbide Trimming Cutter - 1/4in shank, 10mm cut depth. Economy cutter made from Ultra-durable Solid Tungsten Carbide construction for increased performance and str more→ength. Self guided designed nose the run against the workpiece and trim laminates flush to an edge. Single piece solid tungsten carbide allows a harder grade to be used for increased durability on abrasive materials. Ideal for trimming back hard plastic laminates on worktops and other worksurfaces. Trims at 90 degrees to the edge to allow perfect flush fitting of additional laminates for clean professional finishes every time. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 …

For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 • Cut Length Metric: 15 • Overall Length Metric: 58.5 • Radius 1 Metric: 3

Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides are introduced. Solid tungsten carbide economy c more→utter. For use on short runs at 90 degrees or 45 degrees. Will trim and bevel by changing cutter height. Requires side fence or roller bearing. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 38 • Angle: 45

This Starrett Holesaw Kit is ideal for cutting stainless and mild steel sheeting, plasterboard, wood and thin plastics. The holesaws are constructed from heat-resistant, hardened steel with constant p more→itch teeth for exceptionally smooth cuts. Completely assembled ready for use. A safety stop collar at the base of the holesaw prevents travel beyond the holesaw depth. Supplied in a plastic carry case with the following sizes: 20, 25 and 32mm.Additional Information:• Material: Bi-Metal• Pitch: Constant Features and Benefits • Integrated hex shank arbors • Optimised for cordless tools • Requires less energy and saves battery power • Safety stop prevents drilling beyond …

Cuts the Hardest Tiles - The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic m more→aterials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. It is suitable for use with corded and cordless drill drivers. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. …

Fácil fijación en la fresadora
Visibilidad total de la zona de trabajo gracias al plástico transparente
Altura regulable mediante un perno con tornillo de apriete

Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: more→5 • Overall Length Metric: 38 • Angle: 83

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 5.55 • Overall Length Metric: 90

Ideal for posts and newel caps for stairs. Specifications • Shank Diameter: 1/4 • Dia Metric: 35.1 • Cut Length Metric: 7 • Cut Length Imperial: 9/32 • Overall Length Metric: more→61.5 • Bearing Dia Metric: 9.5 • Angle: 30

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 29mm & more→bull; Compatible Arbors: 2L, 3L, 6L, 7L Features and Benefits • Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removal Contents • Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

Economy range clamp, ideal for securing workpiece either onto jigs or to the surface of the machine. Specifications • Overall Length Metric: 160 • Type or Grade: 150 kg force • Pack Qty: 2 pack

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 32 • Overall Length Metric: 64

Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide r more→ound rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-111-C Carded Size: 111mm.Additional Information:• Size (mm): 111• Material: TCT

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should more→be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications • Shank Diameter: 8 mm • Dia Metric: 4 • Cut Length Metric: 16 • Overall Length Metric: 90 • Type or Grade: Up-cut

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 6.35 • Overall Length Metric: 102

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 6 more→.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 69

Long Life Hole Saw and Super Fast Arbor - Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn more→off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again. Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch EXPERT Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, it’s a good hole saw …

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4

Solid Tungsten Carbide economy cutter. Self guiding at 83 degrees with Ref. S48/41. The guide length is 3mm. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: more→1/4 • Cut Length Metric: 6 • Overall Length Metric: 38 • Angle: 83

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 18.2 • Dia Imperial: 23/32 • Cut Length Metric: 21 • Overall Length Metric: 53

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 3.2 • Overall Length Metric: 65

Lasts up to 50x longer than HCS hole saw in tough materials - Cutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Fe more→w hole saws can withstand this kind of work in a mixture of tough construction materials, but the EXPERT Construction Material can. This one hole saw serves, and lasts, for many jobs. With just a few huge carbide teeth on its steel body, the EXPERT Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 22 • Dia Imperial: 55/64 • Cut Length Metric: 19 • Overall Length Metric: 57