Fish Finders

The IDMK H7R2 is a rigid and reinforced in-dash mounting kit for HELIX 7 Series fish finders Provides a secure and finished look for in-dash mounting of your Humminbird fish finder Compatible with Humminbird HELIX 7 G4 and G4N models 1-Year Limited Manufacturer Warranty What's Included: In-dash IDMK H7R2 bracket and mounting hardware

4.3-inch full color high resolution LCD and 300,000 pixels to video The camera combine with four far-infrared LED lights,this combination can garanantee to oberserve te dynamictrend of the under water shoalof fish in dark underwater enviroment Functions:recording, photos-taking, video playback, and viewing pictures Used for fishing, diving, swimming and other outdoor sports.SD card not included.

Portable Underwater Fishing Camera: Lucky portable fishing camera contains a 4.3 inch TFT monitor and a fish finder camera with 20m cable wire. The fishing video camera observes and displays underwater topographic. The underwater fish finder camera presents you the real underwater world. Multifunctional & TFT Monitor: This underwater fishing camera has three functions, camera, video and file browsing. You can switch the functions by menu button on the TFT color monitor. An adjustable sun-visor is installed on the underwater fishing video camera. Infrared Portable Fishing Camera: Four far Infrared LED Lights equipped on the underwater fish finder camera. Low level illumination is 0.1 LUX. The …

FITS: Lowrance Lowrance HOOK Reveal and HOOK² TripleShot models. MORE VIEWS: TripleShot transducer gives you DownScan sonar (straight down), SideScan sonar (up to 300' to each side), and CHIRP sonar (fish arch) views. WIDER SONAR COVERAGE: A wider sonar cone gives you double the coverage of traditional fish finders. EASY TO INSTALL: A single transducer mounts to the transom of your boat. INCLUDES: Built-in temperature sensor.

Hybrid Dual Imaging (HDI) transducer (83/200/455/800) The power of two award-winning technologies -- Broadband Sounder PLUS Exclusive DownScan Imaging -- combined to provide the best-possible view beneath your boat. The HDI Black Med/High/455/800kHz xSonic Transducer has a 9-pin connector and supports Medium and High CHIRP, plus DownScan Imaging.

Item Package Dimension: 7.87L x 4.61W x 1.54H inches Item Package Weight - 0.4 Pounds Item Package Quantity - 1 Product Type - PORTABLE ELECTRONIC DEVICE MOUNT

Great Product

GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (less than 6°) in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings. The 8-pin transducer features high-wide CHIRP traditional sonar (145-230 kHz) and has a power rating of 250 W.

This is the Mounting Bracket Only (000-10874-001) For use with LSS-HD Skimmer transducers Makes for a clean, professional installation Installation manual mentions additional parts, but the only parts that come with this unit are what is pictured. If you need more than just the mounting bracket, you may want to look at 000-11141-001 and 000-10802-001

Package Weight : 0.022 pounds Part Number: 010-11615-00 6-Pin Transducer to 4-pin Package Dimensions: 16.256 L x 1.524H x12.192W(centimeters)

Protective suncover for Simrad NSX 3007

Great Product

Item Package Dimension: 11.26L x 8.5W x 1.26H inches Item Package Weight - 0.6 Pounds Item Package Quantity - 1 Product Type - GPS OR NAVIGATION SYSTEM

SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know where you are casting according to your chartplotter screen. Accurate Heading Even at Low Speed - Its heading output rate at 10 Hz and accuracy of plus or minus 3 degrees ensures your chart orientation and boat heading line match up with reality, even at trolling speeds or when dead in the water.

Raymarine Part A18074 for ST4000 Full compatibility with Raymarine Autopilot ST4000 Raymarine parts and parts

Transom mount transducer 83/200 KHz, 60/20 beam angle Temperature sensor 20' cable with 7 pin plug International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

designed to mount to the inside of most fiberglass hulls with a deadrise less than 15 degrees meant to be glued to your inner hull with a slow-cure epoxy, which is included International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Designed to mount to the inside of your hull and transmit the sonar signal through the hull itself Single/dual transducer with 15-foot cable and slow-cure epoxy included Compatible with many PiranhaMax, FF and Matrix series Humminbird sonar systems International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Designed to connect a SimNet product to an NMEA backbone Cable Length: 0. 5 meters (1. 6 feet) Constructed of marine-grade materials Color: Black

Product Type: FISHING_EQUIPMENT Package quantity: 1 No batteries required Country of Orgin: Hungary

Product Type: FISHING_EQUIPMENT Package quantity: 1 No batteries required Country of Orgin: Hungary

Package dimensions (L x W x H): 23.876 cm x 16.51 cm x 2.54 cm Package weight: 295.1 g Country of origin: Belgium Number of pack: 1

VULCAN 7R SUNCOVER

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & Temp This replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequency transducers included with many Garmin units.