24 V car light bulbs

Typical Black Magic appearance including black brackets in a robust design Powerful light output thanks to modern reflector system and very strong LEDs in all 18 off-road variants! With temperature control system for adaptation to the ambient temperature Typical mounting locations include installation on the roof or roof bar, the radiator grille or bumper 21.5˝ Double Row Lightbar, TSD IP 68, IP 69K, ECE-R10, 2,000 mm cable with open ends, 5,700 Kelvin Lamp Type: LED - Colour Temperature: 5700K Prot.type (IP Code): IP68/IP69K

The new development enables maximum performance with minimalist design, because the beacon does not require a classic light dome The light is visible through a circular light band Despite its minimal light emission area, the beacon emits a clearly visible flashing warning signal and complies with European Directive ECE-R65 for use on public roads The LED technology, the materials used and the design ensure a very long service life and guarantee long-term functional reliability Further advantages are the protection against water and dust as well as the excellent electromagnetic compatibility (EMC) Lamp Type: LED - Number of LEDs: 32 - Power consumption: 13W With rotating warning signal …

Innovative wide-area LED light guide for the taillight function, combined with reflector Thanks to particularly homogeneous illumination, the taillight function is particularly well visible in the dark over a large area - for greater road safety The luminaire is characterised by a long service life, low life cycle costs and high robustness Tested to IP 6K9K, this luminaire is protected against the ingress of dust and water when permanently submerged. Consequently, it also withstands high-pressure cleaning Overvoltage protection ensures that the luminaire is not damaged even during voltage peaks according to ISO 7637 Length: 300mm - Width: 130mm - Height: 40mm - Lamp Type: LED - Number of …

Set of two modules homologated as "half bar" (ECE R65 HTA1) Wide angle coverage of at least 270° when using two modules and 360° when using four modules Synchronisation of 2 or 4 modules possible Assembly as integration into the vehicle body or body product Lamp Type: LED - Number of LEDs: 16 - Power consumption: 30W With flashing warning signal - Lens Colour: Yellow - LED colour: yellow (amber) ADR/GGVS approved - Prot.type (IP Code): IP 6K7

The new development enables maximum performance with minimalist design, because the beacon does not require a classic light dome The light is visible through a circular light band Despite its minimal light emission area, the beacon emits a clearly visible flashing warning signal and complies with European Directive ECE-R65 for use on public roads The LED technology, the materials used and the design ensure a very long service life and guarantee long-term functional reliability Further advantages are the protection against water and dust as well as the excellent electromagnetic compatibility (EMC) Lamp Type: LED - Number of LEDs: 32 - Power consumption: 13W With rotating warning signal …

Can be synchronised with two or more units Besides continuous light, four different flash patterns (single, double, triple and quadruple flash) can be set Tested and approved according to the European Directive for beacons (ECE-R65 ) Integrated day / night mode Slim version with an installation height of only 12.8 mm Lamp Type: LED - Number of LEDs: 6 - Power consumption: 17W With flashing warning signal - Lens Colour: Crystal clear - LED colour: Yellow - Fastening Type: for vertical fastening

This worklight uses four high-power LEDs as light source. The black housing of this worklight is made of aluminium and is equipped with cooling fins. These ensure the necessary heat dissipation of the four high-power LEDs. Thanks to its low power consumption, the 70 LED Generation III module is ideal for use on battery-powered vehicles or whose alternator is already heavily loaded. The Modul 70 LED Generation III is absolutely resistant to shocks, vibrations and voltage fluctuations. At 6500 Kelvin, the light of the LED worklight is very similar to daylight. Lamp Type: LED - Number of LEDs: 4 - Power consumption: 13W - Colour Temperature: 6500K Patterned diffusing lens

LED flashing beacon BST for horizontal surface-mounting - with ECE-R10 / ECE-R65 / SAE approval With 6 LEDs and flashing warning signal (yellow), black aluminium housing, crystal-clear PC light pane Protection class: IP 5K4K / IP 6K9K / IP X9K Lamp Type: LED - Number of LEDs: 6 - Power consumption: 14W With flashing warning signal - Lens Colour: Crystal clear - LED colour: Yellow - Fastening Type: for horizontal fastening SAE approved - Prot.type (IP Code): IP5K4K/IP6K9K/IPX9K Aluminium Housing - Housing material: Aluminium - Housing Colour: Black - Diffusing Lens Material: PC (Polycarbonate)

Halogen rotating beacon Belt drive for constant rotational frequency and optimum running smoothness Robust, easy-to-clean light bonnet with handy pressure point locking system Lamp Type: H1 Lens Colour: Yellow ECE approved Housing Colour: Yellow

Lamp Type: H3 - Power consumption: 70W Hardened diffusing lens ADR/ GGVS Checked - Prot.type (IP Code): IP5K9K Synthetic Material Housing - Housing Colour: Black - Diffusing Lens Material: Glass Width: 115mm - Height: 100mm - Depth: 97mm - with bulbs/with handle

Compact design Powerful and maintenance-free Universally applicable Lamp Type: LED - Number of LEDs: 6 - Power consumption: 13W - Colour Temperature: 6500K Patterned diffusing lens Prot.type (IP Code): IP6K9K/IP6K7 Aluminium Housing - Housing Colour: Black - Diffusing Lens Material: Glass

The beacon with flashing light function has an impact-resistant polycarbonate light dome As the LEDs are maintenance-free, no additional spare parts are required The new KLX 1 LED beacon is dustproof to IP 67 and IP X9K protection classes, protected against temporary immersion in water and resistant to high-pressure cleaning Designed for use on industrial trucks, factory traffic etc. Service life is reduced to a minimum The beacon is equipped with reverse polarity protection. Even if the connecting cables are interchanged, there is no danger to the electronics Lamp Type: LED - Number of LEDs: 8 With flashing warning signal - Lens Colour: Red

The RotaLED Compact is the LED successor to the existing halogen beacon series Rotafix, Rotaflex and Rota Compact. These are 1:1 interchangeable No moving parts are required for the LED functions - no wear and tear and maximum reliability As LEDs are maintenance-free, they do not cause additional spare parts and maintenance costs Service life is reduced to a minimum The flashing light function ensures good warning effectiveness Lamp Type: LED - Number of LEDs: 16 - Power consumption: 10W With flashing warning signal - Lens Colour: Yellow

LED technology with 1 power LED With black base plate, firmly cast Multivolt 9V - 33V 2 holes Ø 5.3 mm for fixing screws Ø: 130mm - Height: 30mm - Lamp Type: LED - Number of LEDs: 1 Light functions: 1 - with indicator (LED)

Classic halogen beacon for 24V applications High design for a large light emission surface and all-round visibility Scratch-resistant light bonnet Lamp Type: H1 - Power consumption: 70W With rotating warning signal - Lens Colour: Blue Prot.type (IP Code): IPX9K/IP5K4K Housing material: ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) - Housing Colour: Black - Diffusing Lens Material: PMMA (Polymethylmethacrylate)

The RotaLED Compact is the LED successor to the existing halogen beacon series Rotafix, Rotaflex and Rota Compact. These are 1:1 interchangeable Signal generation by means of electronic concept, without moving parts Compact design Impact-resistant polycarbonate light dome Dust-tight, resistant to high-pressure cleaners and protected against immersion to a depth of 1 m Lamp Type: LED - Number of LEDs: 16 - Power consumption: 7W With rotating warning signal/with indicator (LED) - Lens Colour: yellow (amber)

Halogen rotating beacon Generates a rotating warning signal by means of a highly polished parabolic reflector and incandescent lamp Protected against dust and splash water Lamp Type: H1 - Power consumption: 70W With rotating warning signal - Lens Colour: yellow (amber) Prot.type (IP Code): IPX9K/IP5K4K Housing material: EPDM (ethylene propylene diene Monomer (M-class) rubber) - Housing Colour: Black - Diffusing Lens Material: PC (Polycarbonate)

Quality Product from Ring Automotive

Robust LED worklight with corrosion-resistant plastic housing. For long-range illumination. Ideally suited as a replacement for halogen worklights With cooling fins for effective heat dissipation With 4 high-power LEDs and low power consumption of only 19 W Protection class: IP 6K7, IP 6K9K. type test: UKCA, ECE-R10, RCM, ADR / GGVSEB. EMC protection: CISPR 25 Lamp Type: LED - Number of LEDs: 4 - Power consumption: 19W - Colour Temperature: 6500K Clear diffusing lens

Halogen rotating beacon For 24V applications Lamp Type: H1 - Power consumption: 70W With rotating warning signal - Lens Colour: Yellow Prot.type (IP Code): IPX9K/IP5K4K Housing material: Plastic - Housing Colour: Yellow - Diffusing Lens Material: PMMA (Polymethylmethacrylate) Height: 208mm - without bulb - Electromagnetic Compatibility (EMC)

Robust LED worklight with corrosion-resistant plastic housing. For long range illumination. Ideally suited as a replacement for halogen worklights With cooling fins for effective heat dissipation With 4 high-power LEDs and low power consumption of only 19 W Protection class: IP 6K7, IP 6K9K. type test: UKCA, ECE-R10, RCM, ADR / GGVSEB. EMC protection: CISPR 25 Lamp Type: LED - Number of LEDs: 4 - Power consumption: 19W - Colour Temperature: 6500K Clear diffusing lens

LED indicator light (tail lift light) for rear mounting on tail lifts - with ECE approval, without indicator failure check The flashing light has 1 light function: Flashing light With 12 yellow LEDs, 2 fixing screws M6, with moulded leads, zinc die-cast housing Length: 108mm - Height: 75mm - Lamp Type: LED - Number of LEDs: 12 - without indicator failure control Light functions: 1 - with indicator (LED) ADR/GGVS approved/ECE approved - Prot.type (IP Code): IPX9K/IP6K7 Colour: Yellow

Halogen rotating beacon Belt drive for constant rotational frequency and optimum running smoothness Robust, easy-to-clean light bonnet with handy pressure point locking system Lamp Type: H1 With rotating warning signal - Lens Colour: Yellow Prot.type (IP Code): IPX9K/IP5K4K Housing material: Plastic - Housing Colour: Yellow - Diffusing Lens Material: PMMA (Polymethylmethacrylate)