Submersible (Drainage) Pumps

Flow rate up to 1200 l/min (72.0 m³/h) Head up to 16 m

Zipper RTP350 compact 3 in 1 water pump, ideal for mounting over the edge of a water barrel and can transport up to 500 L per hour, even up to a height of 11m, to make it easier for garden owners to water their plants. Features: Powerful 350W motor 3-in-1 pump applicable for dirty water, clear water, and flat water Adjustable holding bow made from aluminium Max delivery flow capacity 2.5 m³/h (2,500 L/h) Integrated filter Flat suction facility (approx. 2mm) Solid and reliable design High quality sturdy plastic case with carrying handle Maximum pump height / depth : 11m / 3m

A heavy duty submersible pump suitable for draining pits, sumps, ditches, footings etc. Can be used for both clean and dirty water applications including water with particles upto 35mm dia. Includes a fitted float switch for automatic water level control. Stainless steel pump body & motor case.

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 50mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty draining applications including pits, sumps, ditches, footings etc. Shifts both clean and dirty water including particles upto 35mm dia. Fitted with a float switch for automatic water level control. The stepped adaptor fitting allows for connection of 32 mm (1¼”), 25 mm (1”), or 19 mm hoses which should be secured with a hose clamp.

D Submersible drainage pump for Clean or slightly Dirty Water INSTALLATION AND USE Designed to pump clear or slightly dirty water, these pumps are suitable for use in domestic, civil and professional applications and in particular for draining flooded areas such as cellars and garages, for draining swimming pools and reservoirs and for the disposal of non-sewage waste water. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. New version of the D series, made more reliable with the introduction of double mechanical seals. TECHNICAL CHARACTERISTICS Double mechanical seals. Cast iron pump body

The Baby Battery submersible pumps runs off the DC power from provided by a 12V battery making it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable, battery clips and a float switch for automatic level control.

For heavy and continuous duty pumping of water levels down to 1mm, with a rubber moulded electronic level probe switch. Ideal for automatic control of water levels on flat roofs, car-parks, concrete shuttering, lift-shafts, basements and during incidents of flooding. Power saving as will only operate when probes sense water (not run continuously), then operate for 1 minute after level drops below probes, but continue pumping if probes touch water again during this time. Start level depth of water is approximately 170mm, but probe extensions to turn on approximately at depths of 70mm (70mm kit) and about 5mm (170mm kit) are an optional extra. Pumps water with sand and silt in suspension. Made

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable. Automatic - will turn on at 607mm and off at 115mm with some adjustment to turn on lower.

Lowara SCUBA 107660180 SC411T L27 1,1 kW / 1,5 HP / 3x380-415V 50Hz LOWARA SCUBA Close-coupled Submersible Electric Pumps for clean water in 5” wells Three-phase pump WITHOUT float switch

BC-ST DOUBLE-CHANNEL Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE BC-ST submersible pumps in stainless steel are recommended for draining dirty and filthy water in domestic, civil and industrial applications. They come equipped with a DOUBLE-CHANNEL impeller and are capable of pumping liquids containing short fibred suspended solids up to 50 mm. They are ideal for pumping sewage, waste water, surface water and water mixed with mud in locations such as blocks of flats and detached houses. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. FEATURES Liquid type:

With a stainless steel body and powerful 830W motor offering an 180 l/min flow rate and a lift height of 20m, the CHHDP830 High Head Draining Pump can pump clean and dirty water including solids with a diameter up to 8mm. This draining pump is fitted with non-clogging vortex impeller and offers high-lift waste water transport, making it ideal for DIY or trade purposes to use in pits, trenches, tunnels and water tanks with slurry.

Ideal for pumping water from flooded areas, cellars, sumps etc. Pumps small soft solids in suspension. Not suitable for ponds or water features. Made from tough engineering plastic and stainless steel. Low energy 150 watt motor has overload protection. Built in handle. 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - auto will turn on at 251mm and off at 81mm and work in confined areas.

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast iron, tough steel and ductile iron. Built in handle. 20m of heavy duty H07RNF cable. Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

VX VORTEX Submersible pump for sewage water INSTALLATION AND USE Suitable for use in domestic, civil and industrial applications where the water, such as groundwater, surface water and sewage water, contains suspended solids up t50 mm They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. PERFORMANCES Head +15% as compared to previous versions Flow rate +30% as compared to previous versions TECHNICAL CHARACTERISTICS Cast

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

The PuddlePal is a versatile and portable 2" submersible pump for clean water, featuring the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat roofs. Applications include: • Small water features • Residue • Cellars and Basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering • Lift Shafts