Submersible (Drainage) Pumps

Flow rate up to 220 l/min (13.2 m3/h) Prevalence up to 30 m

The Baby Battery submersible pumps runs off the DC power provided by a 24V battery, making it ideal for pumping water from boat bilges, general drainage and transfer. Both reliable and efficient, this pump has a duty cycle of 20 minutes, and comes supplied with a fixed handle, hose coupling, 5 metres of PVC power cable and battery clips.

For heavy and continuous duty pumping of water levels down to 1mm, with a rubber moulded electronic level probe switch. Ideal for automatic control of water levels on flat roofs, car-parks, concrete shuttering, lift-shafts, basements and during incidents of flooding. Power saving as will only operate when probes sense water (not run continuously), then operate for 1 minute after level drops below probes, but continue pumping if probes touch water again during this time. Start level depth of water is approximately 170mm, but probe extensions to turn on approximately at depths of 70mm (70mm kit) and about 5mm (170mm kit) are an optional extra. Pumps water with sand and silt in suspension. Made

The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic which is resistant to corrosion. It features a vortex impeller giving 30mm solids handling. The maximum submersion depth for this pump is 10m and the minimum sump size is 250mm x 250mm. Applications include: Small water features Cellars and basements Domestic and industrial use Final effluent Nuisance water Marine application

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

Ideal for pumping waste water in septic tanks, sewage plants, factory processes and circulating water in ponds and water features. Pumps large soft solids in suspension. Made from tough engineering plastic and stainless steel. Low energy motors have overload protection. Built in handle. Fitted with an integral female BSP outlet, for pipe connection, and 10m of heavy duty H07RNF cable.

This PSV7A Clarke Water Pump is ideal for draining surface water including flooded cellars, sumps etc. Ideal for pumping clean and dirty water and features fold down legs/base to pump water containing solid bodies up to 30mm in diameter or surface water. Adjustable position float switch automatically turns the pump off when water level drops

The Clarke CPCDP500 Contractor Dewatering Pump offers a robust and portable design, suitable for DIY and Trade purposes in pits, trenches, tunnels and water tanks with slurry. This pump is fitted with a 500W motor, offering a 240 l/min flow rate, designed for shifting clean and dirty water including solids up to 7mm. The CPCD500 is manufactured with a stainless steel drive shaft, impeller and base plate ensuring a longer life time, plus it is completed with a convenient carry handle for easy transport.

The Mizar/S (110V) is ideal for the pumping of chemicals that are of a mildly aggressive nature, which would normally corrode a lower grade of metal and plastic components found in a traditional pump. This pump is suitable for use with sea and salt water and they are also suitable for use with light chemicals. This model can pump small soft solids in suspension, but is not suitable for ponds or water features. This unit includes a 10 metre power cable, allowing for extra working room. The maximum liquid temperature is 35°C (25°C if part-submerged) and this unit also benefits from a built-in handle and included hose connector. Completing this product is a 316 grade (1.4401) pressed

The GR Blue Pro is a sumbersible pump with high-head, cast iron impeller and cutter and boasts an impressive 69,000 cuts per minute. This pump model is equppied with an intake cutting system of a steel plate and triple-bladed rotary cutter. This system cuts fibres and stringy bodies and assures smooth pump function. Applications Industrial schemes Agriculture / farming Sewage and treatment works Irrigation

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast aluminium (for improved portability) tough steel, ductile iron and rubber. Built in handle. 20m of heavy duty H07RNF cable (10m on 0.75kW). Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking.

DC Submersible drainage pump for clear water INSTALLATION AND USE DC submersible pumps, made from heavy gauge cast iron offering exceptional sturdiness, abrasion resistance and durability, are suitable for draining clear or slightly dirty water. They distinguish themselves for their sturdiness and reliability under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS New version of the DC series, totally redesigned, made more reliable with the introduction of double mechanical seals and Epoxy Electrocoating Treatmentof all cast iron parts. This treatment guarantees high resistance to oxidation. Double mechanical seals All cast iron parts subjected to Epoxy

Lowara 104071080 6 gs40t-4os Lowara GS electrobombas Submersible for wells of 4 " 4 kW/5.5 HP/3 x 380 – 415 V 50 Hz

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

The PuddlePal is a versatile and portable 2" submersible pump for clean water, featuring the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat roofs. Applications include: • Small water features • Residue • Cellars and Basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering • Lift Shafts

The Trencher range of submersible 2" drainage pumps that are compact, light and powerful. They are suitable for ground water and water containing sand and silt - maximum solids handling of 7mm.

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

VX-MF VORTEX Submersible pump in stainless steel for sewage water INSTALLATION AND USE Suitable for use with sewage water in domestic, civil and industrial applications or in any other situation, such as with water mixed with mud, with groundwater and with surface water, where the water contains suspended solids. They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS Precision cast stainless steel

This water pump has been constructed with a corrosion resistant stainless steel casing and cast iron base for long reliable service. This heavy duty 110V submersible pump is suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations with a float switch to automatically turn the pump off when the water level drops.

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction