Submersible (Drainage) Pumps

The DR Blue Pro is a submersible drainage pump with an open, multi-channel impeller for most soiled water applications. Applications Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Civil construction

The AP Blue Pro is a sumbersible pump suitable for both domestic and professional applications. The pump has a high-head cast iron impeller and is ideal for clean water, rainwater, seepage water and sandy or muddy water containing small particles no larger than 6mm in suspension. Applications include: Domestic and industrial use Agricultural and farming Sewage and treatment works Irrigation

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

This water pump has been constructed with a corrosion resistant stainless steel casing and cast iron base for long reliable service. This heavy duty 110V submersible pump is suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations with a float switch to automatically turn the pump off when the water level drops.

The DG Blue Professional is a submersible pump is suitable for pumping water polluted with suspended solid particles. The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 40mm. Applications include: Cellars and basements Industrial schemes Final effluent Nuisance water Hire fleets Agriculture /farming Sewage and treatment works Civil construction

The Trencher Range of submersible 2" drainage pumps are compact, light and powerful and are suitable for ground water and water containing sand and silt. The built in agitator makes this pump ideal for removal of dirty water. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering

Ideal for heavy and continuous duty pumping on building sites, industrial processes, tunneling,mines and quarries . Pump water with sand and silt in suspension. Can run for long periods while pumping minimal water and in any position. Made from heavy duty cast aluminium (for improved portability) tough steel, ductile iron and rubber. Built in handle. 20m of heavy duty H07RNF cable (10m on 0.75kW). Supplied with two hose connectors: spigot and mBSP Both adjustable to two positions to avoid hose kinking and supplied as Selectable manual or auto sensor mode - turns pump off when water level drops and protect from dry running.

With a diameter of only 10 cm, the pump of deep and thin wells can be inserted into wells with a minimum diameter of 12.5 cm. The high quality brass thread of the pressure fitting is designed for 1/4" hoses. The case of the TDP 370 E is made of stainless steel. The pump is also equipped with a copper motor, a check valve and a built-in thermal protection circuit. Thanks to the 23 m long power cable, it is connected "plug & play". The dust strainer is also made of stainless steel. Prevents the penetration of particles larger than 1.8mm (based on 0.15% solids content in one ton of water) and protects the pump from sand and dust damage. To ensure that the TDP 370 E can be integrated to the bottom,…

DC Submersible drainage pump for clear water INSTALLATION AND USE DC submersible pumps, made from heavy gauge cast iron offering exceptional sturdiness, abrasion resistance and durability, are suitable for draining clear or slightly dirty water. They distinguish themselves for their sturdiness and reliability under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS New version of the DC series, totally redesigned, made more reliable with the introduction of double mechanical seals and Epoxy Electrocoating Treatmentof all cast iron parts. This treatment guarantees high resistance to oxidation. Double mechanical seals All cast iron parts subjected to Epoxy

This self-priming pump can be used for continuous running and provides top quality general duty for clean water pumping. The strong, durable, double insulated case offers a tough corrosion and rust proof construction. This Clarke pump also benefits form a low consumption motor with overload protection and an anti-airlock valve, complete with a long life ceramic shaft for reliability.

The HSD.55S is a lightweight and robust single-phase submersible drainage pump, with an agitator and impeller constructed from chromium iron to reduce clogging and increase wear resistance when pumping particulate-contaminated water, sludge and bentonite. The hydraulic design of this pump features a double mechanical seal with an oil lifter, for positive seal lubrication in any operating position, not only that, but the high-performance motor enables long periods of operation while partially submerged. Supplied with a pendant float switch, for automatic operation. Built for use and designed for long life application.

The AP Blue Pro is a sumbersible pump suitable for both domestic and professional applications. The pump has a high-head cast iron impeller and is ideal for clean water, rainwater, seepage water and sandy or muddy water containing small particles no larger than 6mm in suspension. Applications include: Domestic and industrial use Agricultural and farming Sewage and treatment works Irrigation

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Lowara 104071080 6 gs40t-4os Lowara GS electrobombas Submersible for wells of 4 " 4 kW/5.5 HP/3 x 380 – 415 V 50 Hz

VX-ST VORTEX Submersible pump in stainless steel for Filthy Water INSTALLATION AND USE The VX-ST submersible pumps in stainless steel are recommended for draining filthy water in domestic, civil and industrial applications, in every case where there are solid bodies in suspension, for example water mixed with mud, groundwater, surface water. They are suitable for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations FEATURES Liquid type: filthy water Uses: domestic, civil

The PuddlePal is a versatile and portable 2" submersible pump for clean water, featuring the ability to pump down to 1mm, therefore ideal for removing water from flat surfaces such as floors and flat roofs. Applications include: • Small water features • Residue • Cellars and Basements • Nuisance water • Civil construction • Quarries and Mining • Hire fleets • Emergencies • De-watering • Lift Shafts

The Trencher range of submersible 2" drainage pumps that are compact, light and powerful. They are suitable for ground water and water containing sand and silt - maximum solids handling of 7mm.

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

The Liberator range of 2" submersible drainage pumps are compact, light and powerful. They are suitable for ground water and water containing sand and silt and have a maximum solids handing of 7mm. Applications include: • Small water features • Cellars and basements • Nuisance water • Civil construction • Quarries and mining • Hire fleets • Emergencies • De-watering

VX-MF VORTEX Submersible pump in stainless steel for sewage water INSTALLATION AND USE Suitable for use with sewage water in domestic, civil and industrial applications or in any other situation, such as with water mixed with mud, with groundwater and with surface water, where the water contains suspended solids. They are suitable for use in applications such as for draining flooded areas such as cellars, underground car parks, car washes, for emptying cesspools and for sewage disposal. These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations. TECHNICAL CHARACTERISTICS Precision cast stainless steel