Submersible (Drainage) Pumps

Clarkes powerful and rugged industrial quality submersible pump has a stainless steel drive shaft and chrome plated body, plus a 50mm (2") diameter outlet.

Industrial quality submersible pump, with stainless steel drive shaft, chrome plated body and 50mm (2") diameter outlet.

The HSE200A is suitable for pumping both dirty and clean water. It is also ideal for pools, fish pond circulation*, rain water drainage, waterfall fountains, garden spraying, sump pits and waste water drainage. The HSE 200A features a robust cast iron base. Includes filter base, outlet connector and 10m of heavy duty HO7RNF cable.

Pump both dirty and clean water with the HSE130A, Great for circulating water in pools & fish ponds* it really comes into its own when pumping ground, rain and flood water, creating waterfalls & fountains in water features, garden irrigation or even emptying waste water from sump pits. Robust build quality with a cast iron base, it has a built in strainer allowing it to pump small solids in suspension. Convenient float switch operated - pump is automatically switched on, then off, as water level rises and falls. *Please note – If used in ponds containing fish and aquatic animals ensure additional protection around the inlet is used

Suitable for pumping both dirty and clean water, the HSE 130 is ideal for pools & fish pond water circulation* and aeration, ground, rain and flood water drainage, creating waterfalls & fountains in water features, garden irrigation and sump pits waste water drainage. Robust build quality with a cast iron base, it has a built in strainer allowing it to pump small solids in suspension.

The HSD.55S is a lightweight and robust single-phase submersible drainage pump, with an agitator and impeller constructed from chromium iron to reduce clogging and increase wear resistance when pumping particulate-contaminated water, sludge and bentonite. The hydraulic design of this pump features a double mechanical seal with an oil lifter, for positive seal lubrication in any operating position, not only that, but the high-performance motor enables long periods of operation while partially submerged. Supplied with a pendant float switch, for automatic operation. Built for use and designed for long life application.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

Ideal for heavy duty and continuous pumping on building sites, ditches, footings, processes etc. Fitted with stirring device to assist pumping of sand and silt in suspension. Made from cast aluminium and iron. Rubber filter base is impact resistant. Built in handle. Hose connector and 10m of heavy duty H07RNF cable included. Selectable manual or auto mode - turns pump off when water level drops and protect from dry running. Residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, flat roofs, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, flat roofs, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.

16 ltrs 3.8 amps, 1.4 Bar, 12VSimple, compact and economicalLong life, very quiet with low power consumptionAn inexpensive way to update a manual to an electric systemSuitable for use with pressure switch and microswitch systems

The FloodMate 1 is an emergency pumping kit for defending property from low level flooding. This set includes a 230V, 100 Watt submersible pump (model BPS100, capable of up 40 litres per minute, through 25mm 1" hose, over 30 metres of level ground). All the contents are supplied in a sturdy, easy-to-carry and store, case with lid and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 3mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Set phase 1 is a non-kink hose that is 10 metres long, and is ideal for pumping near the property e.g. over window ledges, steps,

Designed particularly for heavy duty applications, this robust, powerful water pump is ideal for rapidly shifting both clean and dirty water; in fact, it will move solid water borne objects up to 30mm in diameter! Therefore it's ideal for draining pits, sumps, ditches and footings etc. It's made from tough, durable corrosion proof materials and has a really reliable & low power consumption 230V motor for cost effective long term use. It's also fitted with a float switch for automatic water level control and an anti-airlock valve too.

This water pump has been constructed with a corrosion resistant stainless steel casing and cast iron base for long reliable service. This heavy duty 110V submersible pump is suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations with a float switch to automatically turn the pump off when the water level drops.

Heavy duty submersible pump suitable for use with clean or dirty water. Ideal for draining ponds, pools and building excavations.

This domestic submersible pump is ideal for clearing flooded cellars, trenches, swimming pools etc. and is very popular for creating fountains, waterfalls and ornamental ponds.