Circulation Pumps

Grundfos 95906772 black/red UPS 25–55 N Hot Water System Circulation Product type: WATER PUMP Brand: Grundfos

Installed under the sink at the fixture furthest from the water heater. Items comes with plastic material. Threaded at 1-1/2 inches Use with UP comfort series pumps Prevents cold water runoff

Product Number: 595657 AQUASTAT KIT 3/4" CLIP ON FOR 7/8" O.D. PIPE 105-115F Category: HVAC

Aquastat kit 1-Inch Mounts on pipe May be used with timer 105 - 115 degrees F

Fitting Size: 1-1/2" NPT NPT end connections Compatible with Grundfos UPS/TP 32-160 and 40-ALLL Circulator Pump models Kit includes (2) flanges, (2) gaskets and (4) bolts and nuts Check manufacturer recommendations to ensure a proper fit

power saving and economy of boiler fuel ease of installation and use long failure-free performance materials and parts are resistant agains aggressive water enviroment and do not require additional maintenance pump design allows to separate control unit from the pump in case of failure or maintenance

Premium Smart Pump Wilo-Stratos MAXO-R7 (R7 = without internal temperature sensor) High efficiency inline wet rotor pump with EC motor and electronic power adjustment. Can be used for heating water, cold water and water/glycol mixtures. Energy efficiency index (EEI) depending on the type of pump between ≤ 0.17 and ≤ 0.19.

Pump

Pump

Pump

Pump

Original Wilo quality

Accessories for Wilo Circulation Pumps Fitting R 1a/28i x G 1 1/2i (1x)

Evosta 3, DAB first own Smart circulator, offers unique features thanks to the DAB 4.0 factory which represents a great leap forward in terms of assisting the installer and improving the performance of the domestic cooling or heating systems.TECHNICAL DATAOperating range: 0,4-4,2 m3/h with head up to 8+ metres.Pumped liquid temperature range: from -10 °C to +110°CWorking pressure: 10 bar (1000 kPa)Protection class: IPX5Insulation class: FInstallation: with horizontal motor axis.Standard power input: single-phase 1x230 V~ 50/60 HzPumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

The Onyx CEH25-60/130 is a circulating pump used in heating systems to ensure even distribution of heat throughout the building by circulating hot water from the boiler to radiators or other heat emitters.Installation Length: The "130" denotes the installation length in millimetre’s, meaning the distance between the connection flanges is 130mm.Head Range: The "60" in the model number refers to the maximum head in decimeters (600 cm or 6 meters). This means the pump can push water up to a height of 6 meters.Overall, the Onyx CEH25-60/130 is a reliable choice for circulating hot water in heating applications such as central heating or underfloor heating, offering a balance of performance,

ALPHA1 15-50/60 130High-efficiency circulators, designed for circulating liquids in heating systems.With an energy efficiency index (EEI) at the ErP benchmark for most efficient circulators it contributes to energy savings.The ideal choice for basic functionality needs.FeaturesIntuitive one-button operation makes selection of any control mode simpleNo external motor protection required reducing installation timeHigh-torque start improves startup under harsh conditionsMaintenance free and noiseless due to canned-rotor design and use of robust componentsALPHA plug makes electrical installation quick, safe and easyInsulating shells are supplied with pumps to minimize heat loss in heating

The ALPHA3 is our newest circulator for domestic buildings. It is of the Grundfos quality and guarantees easy installation, market leading energy efficiency and reliable operation in the toughest conditions. For the ultimate benefits of the ALPHA3, however, installers need two other components – the ALPHA Reader and the Grundfos GO Balance app. Together, the state-of-the-art ALPHA3 system helps installers complete hydronic balancing more accurately and in about half the time of traditional methods.

With the addition of the MAGNA1 range Grundfos can now deliver the required high energy efficiency, but with a reduced set of features. These pumps can offer the perfect solution in a refurbishment situation where you need to either replace a Grundfos UPS product or one of the smaller models from the original Magna family. These pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the settings of the pump duty point, thus reducing energy costs.The MAGNA1 range of circulators comes complete with electronically controlled motors that are based on permanent magnet (PM) and stator technology. They are designed for circulating liquids

With the addition of the MAGNA1 range Grundfos can now deliver the required high energy efficiency, but with a reduced set of features. These pumps can offer the perfect solution in a refurbishment situation where you need to either replace a Grundfos UPS product or one of the smaller models from the original Magna family. These pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the settings of the pump duty point, thus reducing energy costs.The MAGNA1 range of circulators comes complete with electronically controlled motors that are based on permanent magnet (PM) and stator technology. They are designed for circulating liquids

With the addition of the MAGNA1 range Grundfos can now deliver the required high energy efficiency, but with a reduced set of features. These pumps can offer the perfect solution in a refurbishment situation where you need to either replace a Grundfos UPS product or one of the smaller models from the original Magna family. These pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the settings of the pump duty point, thus reducing energy costs.The MAGNA1 range of circulators comes complete with electronically controlled motors that are based on permanent magnet (PM) and stator technology. They are designed for circulating liquids

With the addition of the MAGNA1 range Grundfos can now deliver the required high energy efficiency, but with a reduced set of features. These pumps can offer the perfect solution in a refurbishment situation where you need to either replace a Grundfos UPS product or one of the smaller models from the original Magna family. These pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the settings of the pump duty point, thus reducing energy costs.The MAGNA1 range of circulators comes complete with electronically controlled motors that are based on permanent magnet (PM) and stator technology. They are designed for circulating liquids