Power Tool Batteries & Chargers

Fully automatic microprocessor controlled unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Up to 100A power supply maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work. Voltage settings between 13-14.8V for programming. 5m Heavy-duty cable clamps and Anderson plug. Recovery/Desulphation mode will recover a discharged battery (>2V) to almost 100% of its original capacity. 70A continuous output current or up to 100A maximum for up to three minutes as required. Patent-Pending “thermal runaway” protection and algorithms allow fast and safe charging. Designed for use

Features:- 37v/7ah Lithium-Ion Battery- For Column Drill With Magnetic Base To Battery 108 015 AkIncludes:- 1 37v/Ah Lithium-Ion Battery- 1 Protection Box

WALL CHARGER 11 KW, 16 A, FOR ELECTRIC CAR (THREE PHASE):Weight:5.25cm.Length:68cm.Width:15cm.

Wall charger 22 kw, 32 a, for electric car (three-phase).22kw 32a wall charger for electric car three phase.

The 1910A2-5 Power Source Kit consists of 2 x BL4080F 40V Max XGT Li-ion 8.0 Ah batteries and a DC40RB/2 240V twin port fast charger, supplied in a Makpac case. The MKP 8.0 Ah Power Source Kit is specially designed for use with 40V Max and 18V LXT products being used in continuous operation. The BL4080F is a 40V Max Li-ion XGT 8.0 Ah Battery, a new type of cell with increased water and drop impact resistance. Communication between the battery and charger, allows to read more detailed information on the battery usage history. The BL4080F communicates digitally between the battery and the tool and battery and the charger and is equipped with 4 LED battery fuel gauge with a check button and

Heavy-duty construction. High lift version with 1500mm maximum platform height. Fitted with four composite wheels two fixed and two locking castors for easy-rolling over rough workshop floors. One-piece hydraulic unit controlled by large rear mounted foot pedal. Designed to assist with removing and installing batteries in electric vehicles. Can also be used for assisting with many other day-to-day workshop tasks such as removing/installing engines transmissions fuel tanks and subframes etc. Safety release mechanism positioned on handlebar for smooth controlled descent. May also be used as a mobile service bench. This item is heavy. Extra assistance must be provided at the delivery point

The 191U48-0 Power Source Kit consists of 4 x BL4050F 40V Max XGT Li-ion 5.0 Ah batteries and a DC40RB/2 240V twin port fast charger, supplied in a Makpac case. The MKP 5.0 Ah Power Source Kit is specially designed for use with 40V Max and 18V LXT products being used in continuous operation. The BL4050F is a 40V Max Li-ion XGT 5.0 Ah Battery, a new type of cell with increased water and drop impact resistance. Communication between the battery and charger, allows to read more detailed information on the battery usage history. The BL4050F communicates digitally between the battery and the tool and battery and the charger and is equipped with 4 LED battery fuel gauge with a check button and

The 1910B1-4 Power Source Kit consists of 4 x BL4080F 40V Max XGT Li-ion 8Ah batteries and a DC40RB/2 240V twin port fast charger, supplied in a Makpac case. The MKP 8.0 Ah Power Source Kit is specially designed for use with 40V Max and 18V LXT products being used in continuous operation. The BL4080F is a 40V Max Li-ion XGT 8.0 Ah Battery, a new type of cell with increased water and drop impact resistance. Communication between the battery and charger, allows to read more detailed information on the battery usage history. The BL4080F communicates digitally between the battery and the tool and battery and the charger and is equipped with 4 LED battery fuel gauge with a check button and

Heavy-duty construction solid steel framework. High lift version 1750mm maximum platform height. Multiple adjustments can be made to the table and saddles for the removal and installation of most EV vehicle batteries. Fitted with four composite wheels. Two fixed and two locking castors for easy-rolling over rough workshop floors. One-piece hydraulic unit controlled by large rear mounted foot pedal. Designed to assist with EV battery maintenance on electric vehicles. Can also be used for assisting with many other day-to-day workshop tasks such as removing/installing engines transmissions fuel tanks subframes and can be used as a mobile service bench. Safety release mechanism is