Routers & Trimmers

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. D 3/8 inch D 9.5 mm C 1/2 inch C 12.7 mm B 9.5 mm A 90 degrees Shank Diameter 1/4 inch

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 8.5mm • Shank Diameter: 10mm • Length of Cut: 37mm • Overall Length: 82.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Trend C019AX1/4TC Two Flute Cutter 12mm Diameter The Trend C019AX1/4TC is suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. This Cutter has an extended shank length to suit Trend Hinge Jigs. Features: Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Microgranular TC tips ensure perfect sharpness Highly groundtip face maintains its edge PTFE non-stick coated body Extra long shank Suitable for all makes of router Specification: D: 15/32 inch D: 12 mm C: 19 mm C: 3/4 inch OL: 71mm Shank Diameter:1/4 inch

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 29mm • Shank Diameter: 25mm • Length of Cut: 46mm • Overall Length: 105mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Holds Router Bits
Collet holds router bits
Please check the compatibility with your tool by the model number (format: x xxx xxx xxx), The model number can be found on the type label of your tool
For a complete list of compatible models, refer to the product description below
Scope of Delivery: 1x Collet, Diameter 6 mm, Key Width 24 mm

The Einhell TP-RO 18 Li BL is a brushless router which is a member of the Power X-Change family and will run on any 18v Power X-Change battery. This starter set includes two interchangeable bases and a selection of accessories, as well as a storage bag to keep everything in. The brushless motor in the P-RO 18 Li BL delivers excellent performance and is covered by a separate 10 year warraty when registered with Einhell. Important: The collets provided are only suitable for use with 6mm or 8mm shank accessories. These collets should not be used with 1/4" shank accessories as they can't be properly tightened and are a safety hazard. Features & Benefits • Member of the Power X-Change family …