Drill Chucks

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Universal holder for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. Stainless steel sleeve for outstanding corrosion protection. 1/4" hexagonal, suitable for screwdriver machines with mounting as per DIN ISO 1173-F 6.3. Features and Benefits • Stainless sleeve and strong permanent magnet • Strong permanent magnet for secure fit of bits • 1/4" hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3 Contents 1x 893/4/1 K SB Universal Bit Holder, 1/4" x 50 mm; 1x 893/4/1 K Universal Bit Holder: 1/4"x50

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 14mm • Length: 200mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

Milwaukee MX4 SDS Plus drill bits have a symmetrical 4 cutter geometry (4 x 90°) and are ideal for making perfect round holes when fitting anchors. The high volume flutes ensure efficient removal of dust and debris while drilling, and a centering tip enables quick and accurate starting. Features and Benefits • Symmetrical 4 cutter geometry • High volume flutes ensure efficient removal of dust and debris • Centering tip for easy spot drilling with pinpoint accuracy • Welded solid carbide tips on sizes 5mm - 10mm • Increased carbide results in higher durability • Four breaker points pulverize material for faster drilling • Enhanced rebar guards for improved …

Combination spanner AF7/8 l.262mm

Metal Drill / Screw Type Twist Drill / Metal

Extra Long Life - The CYL-5 Drill Bit guarantees extra-long durability when drilling concrete and stone. The combination of a carbide blend developed in-house by Bosch and diamond-ground cutting edges makes the bit extremely wear-resistant. Friction on the flute from drilled material is notably reduced thanks to a 2-flute vario design with a short, variable incline providing good dust removal and wear reduction. The Bosch Power Grip Shank System enables 100% power transfer from machine to drill bit. This allows a direct use of power for drilling with no power loss and thus less wear. For use when drilling holes for fixings in concrete, natural and artificial stone. It is compatible with cylindrical …

Bosch 2608585859 HSS-Co Metal Drill Bit 7.5mm x 69mm x 109mm (Single) The Bosch 2608585859 single drill bit has a 7.5mm diameter, a working depth of 69mm and an overall length of 109mm. The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels.…

Patented groove point and cutting edge. Parabolic scoop. Increased relief angle. Large shank. Durable design. Images are for illustration purposes only.

Round Shank Drills / 1.1 mm Drill Diameter / HSS-G

Drill / 4 mm Drill Diameter / Carbide

Drill / 14 mm Drill Diameter / Metal

Maximum Lifetime - The HSS Twist Drill Bit TiN-coated offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal wear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. This drill bit has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Twist …

Tungsten carbide tipped. For drilling ceramic tiles, glass and mirrors. Low drill pressure and frequent lubrication optimises results. Sizes: 5, 6 and 8mm.

Fast Drilling-Accuracy - The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and is suitable for soft and hard wood This drill bit has a hexagonal shank …

Patented groove point and cutting edge. Parabolic scoop. Increased relief angle. Large shank. Durable design. Images are for illustration purposes only.

Bosch 2608595422 SelfCut Speed Extension: Reach Further, Drill DeeperConquer deep drilling tasks with the Bosch 2608595422 SelfCut Speed Extension. This 152mm extension adds valuable length to your SelfCut Speed spade bits, allowing you to drill through thicker materials with ease.Features:
- Ty attaching this extension to your SelfCut Speed spade bit, you can reach hidden areas and drill through thicker materials that would normally be out of reach with a standard bit length
- This is ideal for applications like drilling holes for cables or pipes behind walls, or creating ventilation openings in deep beams
- Featuring a standard 1/4-inch hex shank, the extension seamlessly integrates with …

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Bosch 2608596076 CYL-9 Multi Construction Drill Bit 7 x 90 x 150mm The Bosch 2608596076 drill bit is ideal for drilling practically all materials including concrete, brick, wood, plastic and more. The 4-flute dura design with reinforced core section delivers better wear resistance and stability when drilling in soft concrete and the centring tip provides a steady drilling start and good guidance throughout. These bits are extremely long lasting and durable for fast drilling performance. Features: Centring tip provides a steady drilling start and good guidance universally Diameter-optimised AWB brazing and hardening technology increases robustness and reduces vibration during use 4-flute dura …

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

The Bosch 2608831030 SDS plus-3 Drill Bit, suited to drilling in masonry and concrete The Bosch 2608831030 is a single SDS plus-3 drill bit with a diameter of 10.0mm and a working depth of 400mm. The drill bit is suited to drilling in masonry and concrete. It is extremely long-lasting and wear-resistant thanks to its high-alloy steel construction and features a 4-flute dura design which provides effective dust removal for optimised drilling performance. For use with rotary hammers with SDS plus holders. Features:
- To be used with rotary hammers with SDS plus holders
- SDS plus-3 Drill Bit offers durability while drilling concrete
- 4-flute dura design provides effective dust removal …

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Microconnect 100 pcs Bit set

Drill Bit / 6.5 mm Drill Diameter