Drill Chucks

Included: 1x PZ1, 2x PZ2, 1x PZ3, 1x PH1, 2x PH2, 1x PH3, 1x T15, 1x T20, 1x T25, 1x T30, 1x SL4, 1x SL5.5, 1x SL5.5, 1x SL6.5, 1x H3, 1x H4, 1x H5, 1x H6
Magnetic Bit Holder: The magnetic holder keeps bits securely in place while in use
Wide Application Range: The screwdriver bit set contains bits suitable for screwing in the most commonly used screws with Phillips, Pozidriv, Torx, Slotted and Hexagon heads
Quick Access To Bits: Thanks to the sturdy carabiner, the bit set can be attached to pants, keeping the bits always within reach for quick and easy access
Universal Compatibility: The drill bits have a ¼ in external hex shank and are compatible with drills and manual screwdrivers from a…

Hole Saw / 33 mm Drill Diameter / SDS-plus / Metal

Drilling and Countersinking - The Arbour-mounted Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, it makes all three applications achievable at once, obtaining proficient results. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multifunctional bit, made of tool steel, has a countersink angle of 90 degrees, five cutting edges, and can also be used as a depth stop. It comes with a hexagon pin key; brad point drill bit is not included. Features and Benefits • Efficient One-step Drilling and Countersinking …

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

The Irwin IRW10502751 Auger drill bit has the following dimensions: Drillbit diameter: 13.0mm Total length: 191mm Working Length: 114mm Note: Image is for illustrative purposes only and may differ from the actual product

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

Milling Drills / 6 mm Drill Diameter / Cemented Carbide / Wood

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

Long Lifetime - The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (…

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Metal Drill / HSS-G

Hole Saw / 40 mm Drill Diameter / SDS-plus / Metal

Suitable for Pozidriv screws
Ductile and tough for hard materials
1/4" hexagon drive,Wera connecting series 1

Multipurpose Drill / 10 mm Drill Diameter

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Multipurpose Drill / 4 mm Drill Diameter / Carbide / Wood

Screwdriver Bit

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

Quick change Blue Groove 4X Quick Change Extensions. They are used with 4X flat bits when extra drilling depth is required.The Irwin IRW10502824 Blue Groove 4X Quick Change Extension comes in the following:Size: 300mm (12 inch)Additional Information:• Overall Length (mm): 300• Pack Qty.: 1

The IRWIN Long Series Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12 to 17. The shank is 400mm in length and 10% larger in diameter for added durability.

Hole Saw / 57 mm Drill Diameter / Metal

The Faithfull Imperial HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action case with transparent front for easy checking of contents. Manufactured to meet DIN 338 standard. 7 Piece F7PSET 1/16, 3/32, 1/8, 5/32, 3/16, 7/32 and 1/4in. 13 Piece F13PSET 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64 and 1/4in.

Hammer Drill / 6 mm Drill Diameter / SDS-plus / Carbide