Drill Chucks

1/2" to 3/8" drive adaptor
With secure socket fixing
With 1/2" square head socket drive
3/8" external square
Made of chrome-vanadium for high load capacity
Included components: 1x 781 c/b: 1/2“ - 3/8“
Power source type: hand powered

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502755 Auger bit - long series has the following dimensions Drillbit diameter 14.0mm Total length 400mm Working Length 323mm

Wera 897/4 Impaktor Bit Holder with the unique TriTorsion system, which features one Torsion zone in the bit and two in the holder, these are activated according to the demands of the application. The unique bit holder also features a slim stainless body and strong retaining magnet to magnetise bits. Use with Impaktor bits. The Impaktor technology ensures an above-average service life. Specification: Size: 1/4in x 75mm

Set for professional drilling in metal. Solid metal box.Features:- Robust twist drill made of high-speed steel for professional use- Right-hand twist drill with a 118° drill point, diameter tolerance H8. DIN 338- Ground from solid metal, high concentricitySpecifications:- Diameter mm:total length mm: 34, 40, 49, 57, 61, 70, 75, 80, 86, 93, 101, 109, 117, 125, 133

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 18 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 14 mm

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 15 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 13 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 16 mm

Supplied in a compact and durable, easy to carry plastic case
Contains 32 x 25mm Screwbits: PZ0, 2 x PZ1, 6 x PZ2, 2 x PZ3, PH1, PH2, PH3, T15, T20, HEX3, HEX4, HEX5, HEX6, SL0.5x3.0, 3 x SL0.8x4.0, SL0.8x5.0, 2 x SL1.0x5.5, SL1.0x6.0, 3 x SL1.2x6.5, SL1.2x7.0
Drywall Bit C-form 30mm
Magnetic Bit Holder ¼” Hex 60mm
7 x 38mm Nut Setters: 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0
Countersink 36mm
6 x Wood Drill Bits: 3.0x60, 4.0x75, 5.0x85, 6.0x92, 7.0x100, 8.0x114
7 x HSS-TiN Metal Drill Bits: 2x49, 2 x 3x61, 3.2x65, 4x75, 4.5x80, 6x100, 7x100,8x120

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 17 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 22 mm

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

The Bosch RobustLine Metal Drill Set includes 13 high-precision drill bits, offering an increased drilling rate - up to 40% faster than standard-ground drill bits. HSS-G metal cutting drill set. To DIN338. 135 point. Set contents (1 of each): 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6 and 6.5mm.

Metal Drill / 8.2 mm Drill Diameter / HSS-G

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications • Diameter: 8mm • Length: 460mm • Working Length: 400mm • Pack Qty: 1 Features and Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.The Fine Toothing Is Particularly Suitable For Cutting Metals. It Ensures Smoother Running And Reduces The Necessary Effort. The Reduction In Heat Development During Cutting Increases Tool Life, Especially In The Case Of Metals. Suitable For Alloyed And Non-Alloyed Steels (Up To 1.000 N/Mm² Strength), High Chromium Alloyed Steels Such As Stainless Steel, Steels Resistant To Rusts And Acids, Non-Ferrous And Light Metals.Specifications:- Ø: 54,0 Mm- Ø (Inch): 2 1/8 Inch- M + Pg: Pg 42- Material: Hsse-Co 8- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Ang…

The Hss Twist Drill Bit Ground Is Manufactured To Din 338. The Drill Bit Is Type N (Flute Angle) With A 135-Degree Tip And A Diameter Tolerance Of H8.It Has A Cylindrical Shank System (Shank Equal To Drill Bit Diameter) And Is Intended For Use In Drill Stands And Drill Drivers.Features: - Precision-Ground Bit Made Of Hss Enables Fast Results- No Need To Pre-Punch Or Pilot Drill Up To 10 Mm-Diameter- Manufactured To Din 338, Drill Bit Type N (Flute Angle) With A 135-Degree Tip, Diameter Tolerance H8- 135-Degree Self-Centring Split-Point Tip Combines Active Cutting And Perfect Centring Without Wandering- Cylindrical Shank Compatible With Three-Jaw Drill Chucks.Specifications: - Steel- Cast Iron- …

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design Self-centering tip prevents wandering, making quick and easy drilling starts possible Increased drilling rate generates less heat and wear PointTeQ tip design remains sharp and ensures continuous durability The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and …

High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires little pressure. Ideally suitable for drilling larger drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm.Specifications: - Ø: 14,0 mm- Total length L1: 160,0 mm- DIN: 338- Material: HSS-G- Surface: bright- Cutting direction: right hand cutting- Shank: reduced- Drilling depth: 5 x D- Point cut Shape C: Split point- Point angle: 118°- Helix angle: 25-30°- Tolerance: h8- Profile of flute: normal- Core: normal