Drill Chucks

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Makita's Nemesis II SDS Plus drill bits are PGM Sichersafe certified, with centering tips and symmetrical 4-cutter heads. Drilling into reinforced concrete is no longer a hit and miss application, reinforcing bar being no obstacle for the Nemesis drill. Also perfect for use in the hardest of natural stone. Nemisis II drill bits have a wear mark on the head that highlights any compromise in PGM certified drilling accuracy. As long as the wear mark is still visible, the drill bit is suitable for making anchor holes. Its unique symmetrical head geometry ensures precision drill holes. Perfect for critical anchor fixings and where spot drilling is required. The Nemesis will drill up to 50% more holes …

High quality combination tapping drill bits for drilling, tapping and deburring. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. The very good centring properties, perfect chip removal and a low tilt risk ensure pleasant working. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 847 HSS Combined Tap Bits, 4.2 x 41 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 15 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 13 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 16 mm

High quality bits for Phillips screws. Tough viscous for universal use. Thread drive M 5. Features and Benefits • For Phillips screws • Ductile and tough for hard materials • Thread drive M 5 (Wera connecting series 12) Contents 851/12 Bits, PH 2 x 33 mm

Tough viscous Wera bits for Pozidriv screws for universal use, with thread drive M 4. Features and Benefits • Suitable for Pozidriv screws • Ductile and tough for hard materials • Thread drive M 4 (Wera connecting series 11) Contents 855/11 Bits, PZ 2 x 33 mm

High quality combination tapping drill bits for drilling, tapping and deburring. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for great durability. The very good centring properties, perfect chip removal and a low tilt risk ensure pleasant working. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 847 HSS Combined Tap Bits, 5 x 44 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 17 mm

Supplied in a compact and durable, easy to carry plastic case
Contains 32 x 25mm Screwbits: PZ0, 2 x PZ1, 6 x PZ2, 2 x PZ3, PH1, PH2, PH3, T15, T20, HEX3, HEX4, HEX5, HEX6, SL0.5x3.0, 3 x SL0.8x4.0, SL0.8x5.0, 2 x SL1.0x5.5, SL1.0x6.0, 3 x SL1.2x6.5, SL1.2x7.0
Drywall Bit C-form 30mm
Magnetic Bit Holder ¼” Hex 60mm
7 x 38mm Nut Setters: 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0
Countersink 36mm
6 x Wood Drill Bits: 3.0x60, 4.0x75, 5.0x85, 6.0x92, 7.0x100, 8.0x114
7 x HSS-TiN Metal Drill Bits: 2x49, 2 x 3x61, 3.2x65, 4x75, 4.5x80, 6x100, 7x100,8x120

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 18 mm

High quality wood twist drill bits for precise, splinter-free drilling in soft wood, hard wood and laminated panel material. Made out of high speed steel (HSS). The hexagonal shaft ensures very good power transfer. A finely-tuned material elasticity provides for a long service life. Very good concentricity. ¼" drive suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • Twist drill bit for wood applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents 849 HSS Twist Wood Drill Bits, 6 x 95 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 14 mm

• HSS Nova 25 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 25 mm. Specifications Cutting depth: 25 mm Bore Ø: 22 mm

Useful SDS-Plus 13x58 mm Chisel.Features: - Sds PlusSpecifications: - Length: 58 Mm- Product Type: Rotary Hammer- Drill Bit Diameter: 1.3 Cm- Material: Silver

The DeWalt XLR SDS Plus Full Head Carbide Drill Bits are a tough solid carbide tipped drill bit suitable for drilling plug & anchor holes in masonry, all types of stone and concrete. Its 4 flute spiral design aids consistent drilling speed and efficient debris removal. Specifications • Diameter: 8mm • Length: 460mm • Working Length: 400mm • Pack Qty: 1 Features and Benefits • The Innovative Full Head Carbide drill bit offers the highest levels of performance to users with the hardest applications • Superior carbide grade and geometry ensures greater resistance to breakage and premature wear to ensure maximum drill bit life and durability • Four cutter geometry …

The BOSCH PROFESSIONAL SDS Plus-5 18x150x200 mm Multi-Material Drill Grey is a high-quality drill bit designed for professional use. It is compatible with SDS Plus chucks, making it easy to attach to your drill and providing a secure fit during operation.This drill bit is specifically engineered for multi-material applications, meaning it can effectively drill through a variety of materials such as concrete, masonry, wood, and metal. Its excellent drilling performance is due to its sharp carbide cutting edges, which ensure precise and clean drilling results.The 18x150x200 mm size of this drill bit allows for deep drilling, making it suitable for various tasks, including drilling holes for anchor …

High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires little pressure. Ideally suitable for drilling larger drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm.Specifications: - Ø: 14,0 mm- Total length L1: 160,0 mm- DIN: 338- Material: HSS-G- Surface: bright- Cutting direction: right hand cutting- Shank: reduced- Drilling depth: 5 x D- Point cut Shape C: Split point- Point angle: 118°- Helix angle: 25-30°- Tolerance: h8- Profile of flute: normal- Core: normal

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

The Hss Twist Drill Bit Ground Is Manufactured To Din 338. The Drill Bit Is Type N (Flute Angle) With A 135-Degree Tip And A Diameter Tolerance Of H8.It Has A Cylindrical Shank System (Shank Equal To Drill Bit Diameter) And Is Intended For Use In Drill Stands And Drill Drivers.Features: - Precision-Ground Bit Made Of Hss Enables Fast Results- No Need To Pre-Punch Or Pilot Drill Up To 10 Mm-Diameter- Manufactured To Din 338, Drill Bit Type N (Flute Angle) With A 135-Degree Tip, Diameter Tolerance H8- 135-Degree Self-Centring Split-Point Tip Combines Active Cutting And Perfect Centring Without Wandering- Cylindrical Shank Compatible With Three-Jaw Drill Chucks.Specifications: - Steel- Cast Iron- …

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.