Drill Chucks

Bit Holder

7042T T-Bit PZ2 x 50 mm

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

Features:- Straight Holes And High Chip Removal Rate Due To An Optimised Low-Friction Flute Geometry With A Solid Centre- Optimised Scoring Spur And Precision-Ground Main Cutting Edge Produce Accurate Holes- Heavy-Duty Self-Feeding Tip Pulls The Bit Through Completely, Which Allows For Quick Precision-Drilling- Straight Holes And High Chip Removal Rate Due To An Optimised Low-Friction Flute Geometry With A Solid Centre- Hex Shank For Maximum Power Transfer In Standard Three-Jaw Drills And Hexagonal Drill Driver Chucks.Specifications: - Softwood- Hardwood- Diameter (D) Mm: 14.00- Working Length (L1) Mm: 385- Total Length (L2) Mm: 450- Width Across Flats (D) Mm: 11.10

The Einhell "M" Case measures 175mm x 108mm x 45mm and uses interchangeable inserts which allows the user to add or remove accessories if required. The robust locking clip closure helps to keep contents secure while being transported between jobs, and the transparent lid enables quick identification of the contents when you're searching for the right accessory. This accesory set contains 8 hex shank HSS drill bits, and an impact rated screwdriver bit set that includes 5 nut drivers and an impact bit holder. Also included is a countersink so you have everything you need for drilling and counterinking pilot holes before driving screws into them. Features & Benefits • Impact resistant screwdriver …

Powerful right-hand cutting high-performance drill with distinctive heat resistance. Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel. Ideally suitable for drilling larger drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm.Specifications:- Ø: 14,0 mm- Total length L1 160,0 mm- DIN 338- Material HSSE-Co 5- Surface Gold surface- Cutting direction right hand cutting- Shank reduced- Drilling depth 5 x D- Point cut Shape C: Split point- Point angle 130°- Helix angle 25-30°- Tolerance h8- Profile of flute normal- Core normal- Weight: 0,12700 KG

Bosch power change arbors for holesaws offer increased robustness and precision over its predecessor. The Power Change adaptor system enables the user to work more efficiently, allowing the holesaw and pilot drill to be changed without tools. Features and Benefits Proven reliable Bosch technology Robust yet lightweight construction at just 0.15 Kgs High performace and easy to use - suitable for tradesman and hobbyists alike

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.On Easily Cut Materials The Varied Toothing Ensures That The Cut Is More Even And Requires Less Effort. The Reduction In Vibrations And Heat Development During Cutting Achieves Up To Three Times The Tool Life. Suitable For Unalloyed Steel (Up To 700 N/Mm² Strength), Non-Ferrous And Light Metals, Plastics, Plasterboard And Light Building Boards, Fibreboard, Plywood And Wood.Specifications:- Ø: 102,0 Mm- Ø (Inch): 4 Inch- Material: Hss- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Angle: Work´S Specification- Weight: 0,34500 Kg

Fast Drilling-Accuracy - The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and is suitable for soft and hard wood This drill bit has a hexagonal shank …

15mm Bormax 2.0 Metric Forstner Bit, 1622015 Premium quality,unique design disperses wood chips when drilling , Very accurate , Wave profile ensures no scortching of the hole. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Less effort is needed for drilling., 1622, 162201500

The Irwin IRW10502780 Auger drill bit has the following dimensions: Drillbit diameter: 30.0mm Total length: 240mm Working Length: 175mm

Universal holder for the take-up of bits with ¼" hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) • Strong retaining ring for optimum fit of the tool in the holder • Strong permanent ma…

Hole Saw

Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for screwdriver machines with mounting as per DIN ISO 1173-F 6.3. Features and Benefits • Rapidaptor technology for rapid bit change • Rapidaptor universal holder with ring magnet for bits with 1/4" hexagon drive • 1/4" hexagon drive Contents 889/4/1 Rapidaptor Universal Bit Holder, 1/4" x 75 mm

Drill / Number of Screw Bits 24 / Cemented Carbide / Wood

Very Robust for Formwork - The Installation Drill Bit is very robust for formwork. Its drill bit and shank end are screw-connected, which ensures a low risk of breakage and improves smooth-running operations. Furthermore, its tapered flute, offset drill bit and shank ends prevent jamming even in moist wood, while maintaining enough power to cut through embedded nails. Equipped with an extra-long shank, the bit delivers versatile drilling in multilayer building materials or sandwich materials, e.g. for building trade (formwork) and for interior fitting work, plumbing, heating and electrical installation. It is suitable for use on formwork, boards, planks, beams, plasterboard, light building materials,…

Adaptor from square to hexagonal. Suitable for the attachment of bits with ¼" hexagon drive as per DIN ISO 1173-C 6.3. Drive: ½" square. Features and Benefits • 1/2" adaptor • Suitable for bits with 1/4" hexagon drive (Wera connecting series 1) • 1/2" square socket drive • Equipped with ball stop groove Contents 780 C 1/2" Adaptor, 780 C/1 x 1/4" x 35 mm

Drill / SDS-plus

18 piece drill and screw bit set
Supplied in a plastic clear cover case
Allows the user to easily see the contents
Includes 50mm screw bits: PH1, PH2 x 2, PZ1, PZ2, PZ3, SL5.5, SL6.5, 48mm nut setters 6mm, 8mm, 10mm and 12mm, 160mm SDS Plus masonry drill bits 5mm, 6mm x 2, 8mm and 12mm, SDS-Plus to ¼” hex QC adapter
Colour coded bits
Included components: 1 x Makita E-07026

Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 20.0mm.Total length: 300mm.Working length: 240mm.

The BOSCH PROFESSIONAL SDS Plus-5 12x550x615 mm Multi-Material Drill is a high-quality, versatile drill bit that is designed for professional use. It features a grey color and is part of the extensive range of electric tools and accessories offered by BOSCH.With a 12mm diameter, 550mm overall length, and 615mm working length, this drill bit is suitable for a wide range of drilling applications. It is designed with a special multi-material tip that allows for drilling through various materials such as concrete, masonry, wood, and metal, making it a versatile tool for different projects.The SDS Plus-5 drill bit is engineered for durability and long-lasting performance. It is made from high-quality …

Centring Aid Is Ideal For Drilling Precise Holes.Features:- A Plug For Cooling Water Is Also Integrated Into The Centring Aid To Prevent Overheating- Available In Two Versions And Suitable For Use With All Common Diameters Of Diamond Wet Drill Bits- Easy To Fix Onto Tiles For An Exact Start Without Wandering When Wet Or Dry Diamond Core Drilling

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

Significantly longer life twist drill, up to 5 times more holes possible. Time savings of up to 50%. Extremely fast and energy-saving drilling. Perfect centering, avoiding slipping even on round surfaces such as pipes and tubes. Easy and smooth drilling process, without jamming in the material. Optimum performance in portable (cordless) power tool boring machines.Specifications:- Ø (mm): 10.5