Drill Chucks

Features:- 4-flute dura design provides effective dust removal for increased endurance- Fits all SDS plus rotary hammer drills.For Drilling Concrete:- SDS plus-3 Drill Bit offers durability while drilling concrete- High-alloy steel produced with optimised hardening technology to withstand wear- Indented cutting edges made from a Bosch-controlled carbide blend provide additional resistance- As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings.- The bit is intended for work on concrete and masonry and is to be used with rotary hammers with SDS plus holders.…

Mounting Shaft

The bit checks from Wera are extremely compact and are therefore ideal companions even for mobile use
The set-up bit checks impress with their functionality in the smallest of spaces
29 tough bits for Phillips, Pozidriv and Torx screws, for universal use
In advertising-free Christmas box - also ideal as a gift
Universal holder with quick-change chuck and strong permanent magnet
Drive system: Phillips

Wood Drill

Wood Drill

130mm for drywall screwdriver
For use in combination with auto-feed attachment
4mm diameter

Maximum-Precision Deep Holes - The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling deep holes in alloyed and non-alloyed …

Good product to use
Ideal Product
DRILL BITS

The IRWIN® SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra-short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have …

The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non-alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact. This DEWALT Extreme 2 Metal Drill Bit has the following specification Tip Diameter 5.0mm. Working Length 46mm. Overall Length 86mm. Pack Quantity 10.

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

Robust For Formwork:- Installation Drill Bit is very robust for formwork- Tapered flute, offset drill bit and shank ends prevent jamming in moist wood and cut through embedded nails- Extra-long shank for versatile drilling in multilayer building materials or sandwich materials- Made of HSS manufactured to DIN 7490, drill bit tip with chisel edge (118 degrees)M- ade from HSS (high-speed steel), the Installation Drill Bit is manufactured to DIN 7490. It has a drill bit tip with chisel edge of 118 degrees.- It is compatible with all rotary hammers with an SDS plus holder.Specifications:- Diameter (D) mm: 12.00- Total length (L2) mm: 400

Long Lifetime - The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (…

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit´s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, s…

Black & Decker A7200-XJ drill bit

Heavy duty steel body core drills with TCT cutting tips. Ideal for cutting clean holes in masonry. Use with 1/2" BSP compatible arbors and drills equipped with a safety clutch. Do not use with drills set in hammer action.

Centrode Pozidrive bit 1-100 mm
Long shaft Centrode Pozidrive bits with precision milled shaft
durable Zirconium Nitride (ZrN) coating
Size PZ 1. length 100 mm

The Makita B-49432 set contains a useful selection of HSS, masonry and brad point drill bits in a durable plastic storage case. Features and Benefits • HSS drill bits ideally suited to metal and also suitable for wood & plastic • Masonry drill bits for hammer drilling into brick & concrete • Brad point drill bits for wood • Round shank suitable for use with standard jawed drill chucks • Durable plastic storage case Contents • HSS-G Drill Bits: 4,5,6,7,8,10mm • Brad Point Wood Drill Bits: 4,5,6,7,8,10mm • Masonry Drill Bits: 4,5,6,7,8,10mm • Plastic Case

Screwdriver with flexible shaft to reach areas which are difficult to access. Thanks to the design with a particularly slim bit holder, different screw profiles can be operated even in very tight workspaces. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. With hexagon anti-roll protection against rolling away. Features and Benefits • Bit holder with very slim design for work in confined spaces. • Flexible, bendable shaft • Secure bit holding feature due to locking mechanism. With strong permanent magnet. • Compact stainless steel holder for bits with 1/4"- external hexagon drive as per DIN 3126, ISO 1173 Form C 6.3 and E …

The Makita Performance SDS Plus range consists of European manufactured hammer drill bits with a patented high volume multi-flute that quickly channels the drilling dust from the hole, saving both time and money. Due to its aggressive design, the fast and durable carbide tip allows easy centering and spot drilling. Designed for regular professional use, providing excellent performance in the toughest of materials. Also excellent for drilling in high resistance materials such as Green Concrete or Engineering Brick. The unique reinforced flute geometry transfers more impact energy from the rotary hammer to the drill head, reducing stress for user and power tool. The design and technology innovations …

Multipurpose Drill / 8 mm Drill Diameter / Carbide / Wood

15-45mm haed size
Fits all brands
Use for softwood, medium-hard wood, wooden board materials, light building materials
Adjustable wood drill bit for easy, fast drilling
Adjustment range of 15 - 45mm with centring tip for accurate pilot drilling

Size PH 2
Length 100 mm
Model Number: 500845