Drill Chucks

3/8" Bormax 2.0 Imperial Forstner Bit, 1622215 Premium quality,unique design disperses wood chips when drilling , Very accurate , Wave profile ensures no scortching of the hole. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Less effort is needed for drilling., 1622, 162221500

1/2" Bormax 2.0 Imperial Forstner Bit, 1622217 Premium quality,unique design disperses wood chips when drilling , Very accurate , Wave profile ensures no scortching of the hole. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Less effort is needed for drilling., 1622, 162221700

Extension bars with powerchange plus mandrels. Features and Benefits Delivers vastly increased robustness and precision from its predecessor The Power Change adaptor system enables the user to work much more efficiently - allowing the holesaw and pilot drill to be changed without tools Increased length allows work in difficult to reach areas and greater depth of cut when required

Fast Drilling-Accuracy:- Auger Bit is for fast drilling-accuracy in wood- Straight holes and high chip removal rate due to an optimised low-friction flute geometry with a solid centre- Optimised scoring spur and precision-ground main cutting edge produce accurate holesSpecifications:- Diameter (D) mm: 20.00- Diameter (D) Inch: 7/16- Working length (L1) mm: 385- Total length (L2) mm: 450- Width across flats (d) mm: 11.10- Width across flats (d) inch: 7/16

Screwdriver Bit / Screw Type TORX

Bosch 2608594239 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 102mm The Bosch 2608594239 HSS-Bi-Metal Holesaw has a diameter of 102mm and a working length of 44mm. BiM Progressor Hole Saw offers a 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. Features:
- Redesigned with Bi-Metal with 8% cobalt alloy for increased durability
- BiM Progressor …

Hole Saw / 29 mm Drill Diameter / Carbide

The DT4925 Dewalt cobalt drill bit is 8% cobalt which maintains a sharper cutting edge and delivers 4x longer life versus DEWALT Black Oxide bits. The optimised tip and flute geometry delivers 2X the penetration speed, versus DEWALT Black Oxide bits, removes material faster and reduces heat build up. The stronger central core delivers 2X the resistance to breakage versus DEWALT Black Oxide drill bits. Specifications • Diameter: 4.1mm • Length: 75mm • Working length: 43mm • Pack Quantity:10

COMPATIBLE EQUIPMENT: The bit set is suitable for screwing and unscrewing slotted, crucifom, Torx and allen screws, and fits a hand or machine-driven 1/4" hex drive
ALL-PURPOSE: The set is suitable for industry as well as for ambitious DIYers The bits can be used with hand-operated as well as electric and pneumatic screwdrivers
QUALITY MADE IN GERMANY: The set of 31 bits and a magnetic 1/4" bit holder is made in Germany and meets GEDORE’s high quality standards
GEDORE QUALITY FOR MORE THAN 100 YEARS: The product range of over 17,000 tools meets and exceeds industrial standards As a professional, use GEDORE hammers, pliers or entire toolkits for safe working
SCOPE OF DELIVERY: 1 x GEDORE 66…

• HSS Nova 50 core bit with 3/4 in Weldon holder • Industrial standard. Metric dimensions, cutting depth 50 mm. Specifications Cutting depth: 50 mm Bore Ø: 27 mm

This Makita Ezychange Hole Saw is equipped with quick release pilot drill and core body. This not only allows speedy size changes but is also a safer method for the user. Manufactured from HSS Bi-Metal with 8% cobalt and progressive tooth geometry, ensures long service life and high cutting speeds suitable for ferrous and non ferrous metal, stainless steel, Aluminium, wood and plastics. Ezychange hole saws can be purchased individually or as a kit designed with the right sizes to suit your trade. Compatible with other major manufacturers quick change holesaws. Specifications • Diameter: 86mm • Working Length: 44mm Features & Benefits • Allows speedy size changes • Core body …

• HSS Nova 25 core bit with QuickIN holder• Industrial standard. Metric dimensions, cutting depth 25 mm.SpecificationsCutting depth: 25 mmBore Ø: 14 mm

Bosch Professional grade DIN 338 HSS-R drill bits. Ideal for drilling into metal.

Metal Drill / 11.3 mm Drill Diameter / HSS-G

Individually tested tool as per IEC 60900 at 10, 000 V for safe working at up to 1, 000 volts
Extremely short and compact 3/8-inch bit socket for easy work even in very confined spaces
Wera Bit technology for a long service life
Extremely short and compact 3/8 inch bit socket for easy work even in very confined spaces
Increased safety due to 2-component isolation with yellow insulation core under red insulation outer layer
Extremely short and compact VDE ⅜“ bit socket for easy work even in very confined spaces

Significantly longer life twist drill bit, up to 5 times more holes possible.Time savings of up to 50%.Extremely fast and energy-saving drilling.Perfect centering, avoiding slipping even on round surfaces such as pipe and tube.Easy and smooth drilling process, without material jams.Optimal performance in portable (cordless) power tool drilling machines.

Features:- Exceptionally durable drill bit tip with Bosch Carbide Technology- Punch through reinforced concrete with a 4-cutter Full Carbide Head.- Highly resistant drill tip connection with Bosch's welding technology.Expert Sds Plus-7x For Long Life Drilling Reinforced Concrete:- Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn't jam and presents no weakness on impact.- For construction professionals drilling concrete and reinforced …

Expert Self Cut Speed For Maximum Speed Drilling In Wood: Spade Bits Are A Great Accessory For Electricians And Other Installation And Building Workers. What If They Could Be Even Faster And More Efficient? With Bosch Tip Technology, They Can. Equally At Home In All Types Of Softwood, The Bosch Expert Self Cut Speed Spade Bit Offers Efficiency And Convenience To Professionals Who Need To Drill Through Holes For Cables, Pipes, And Other Hardware Installations.Features:- Clever Wave-Shaped Spade Designed For Fast Chip Removal.- Fast Drilling Is Easy With Bosch Tip Technology- Self-Feeding Thread For Effortless, High-Speed Drilling.Specifications:- Materials: Softwood,Particleboard- Diameter Mm: …

Very Robust for Formwork - The Installation Drill Bit is very robust for formwork. Its drill bit and shank end are screw-connected, which ensures a low risk of breakage and improves smooth-running operations. Furthermore, its tapered flute, offset drill bit and shank ends prevent jamming even in moist wood, while maintaining enough power to cut through embedded nails. Equipped with an extra-long shank, the bit delivers versatile drilling in multilayer building materials or sandwich materials, e.g. for building trade (formwork) and for interior fitting work, plumbing, heating and electrical installation. It is suitable for use on formwork, boards, planks, beams, plasterboard, light building materials,…

Powerful right-hand cutting high-performance drill with distinctive heat resistance. Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel. Ideally suitable for drilling larger drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm.Specifications: - Ø: 16,5 mm- Total length L1: 184,0 mm- DIN: 338- Material HSSE-Co: 5- Surface Gold: surface- Cutting direction: right hand cutting- Shank: reduced- Drilling depth: 5 x D- Point cut Shape C: Split point- Point angle:130°- Helix angle: 25-30°- Tolerance: h8- Profile of flute: normal- Core: normal

Longer service life in concrete and reinforcement thanks to the stabilised head geometry and rounded cutting edges. Patented double-edge cutting design according to the bionic principle. Innovative Twinmax 3D spiral profile provides the ideal removal of drill dust. Certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the Deutsches Institut für Bautechnik. (DiBt). Fields of application: for granite, concrete, concrete reinforcement, clinker, stone, brickwork and marble. In all hammer drills with SDS-plus adaptor and 2-groove adaptor such as Hilti TE 10-22.Specifications: - Ø: 20,0 mm- Total length L1: 300,0 mm- Flute length L2: 250,0 mm- Ø (inch): 25/32 inch…

Metal Drill / 7.9 mm Drill Diameter / HSS-G

13mm HSS-Ground Brad Point Drill Bit, 1594130 Made in Germany from premium grade high speed steel, the brad point drills are precision machined to give a true diameter. A pin point tip assists with the accurate location of the drill and razor sharp lips score the wood prior to cutting for a clean tear free hole., 1594, 159413000

The Modern Construction Site Requires Working On Many Different Materials And You Never Know What You Will Need To Drill Next. Finding The Right Drill Bit Can Be Difficult And Time-Consuming – Unless You Have The Expert Multiconstruction Drill Bit.The Bosch Expert Cyl-9 Multiconstruction Cylindrical Drill Bit Is The One Drill Bit That Should Always Be In Your Toolbox: You´ll Never Get Stuck On A Job Or Waste Time Looking For The Right Bit.Features:- High Precision Drilling Multiple Materials- Accurate Drilling Is Easy With Bosch Centering Geometry.- Start Holes Accurately With A Specially-Designed Centering Tip.- Cylindrical Shank Compatible With Three-Jaw Drill Chucks.Specifications:- Diameter (D)…