Multi Tool Blades

Universal oscillating multi - tool accessories, suitable for use with Draper and other manufacturers oscillating multi - tools. Designed for a host of different tasks.

This replacement accessory set includes a 2.3mm collet, grinding stones with shanks, a sanding shank, mandrels (for felt wheels and cut off wheels), stainless steel brushes, diamond cutters, HSS drill bits, sanding discs, sanding bands, felt wheels, cut-off wheels, a whetstone and a wrench. For use with rotary tools.

The Dremel 628 precision drill bit set contains a selection of 7 drill bits suitable for drilling into wood or soft metal. As the shaft diameters vary, the set is suitable for Dremel tools equipped with a variable chuck such as the 4486 Dremel Multi Chuck. Drill diameters: 0.8, 1.2, 1.6, 2.0, 2.4, 2.8, 3.2mm Maximum speed 35,000 rpm. Housed in a handy plastic case. Dremel type 628.. Not compatible with the Dremel 4200.

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

Brass brushes are non-sparking and softer than steel.They will not scratch soft metals like gold, copper, brass.

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

Brass brushes are non-sparking and softer than steel.They will not scratch soft metals like gold, copper, brass.

Mandrels are used to mount different accessories, like felt polishing wheels or cut-off wheels.SpecificationsShank diameter - 3.2 mm Maximum RPM: 35.000 1/minPack of 4

Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals.SpecificationsShank diameter: 3,2 mm Working diameter: 4,8 mm Pack of 3

Saw blade for detailed cuts in wooden materials. This blade has 7 teeth per centimeter ensuring the finest cutting results. Technical specifications: Length: 100mm Cutting depth: 12mm. Teeth per centimeter: 7 Blade width: 0.2mm. Blade depth:1.9mm.

High speed cutters can be used for shaping, hollowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Shank diameter: 3.2mm Max. speed: 30000rpm

Reliable Removal of Hard Residues - The Starlock ATZ 52 SC scraper provides reliable removal of hard residues. Its sharp blade is ideal for solid, brittle material removal. It features a rigid, firm body design made of HCS (high carbon steel), making the scraper robust and resilient to bending when efficiently removing solidified residues. It reliably removes mortar or tile adhesive, mortar and concrete residues and hard carpet adhesive residues. It is suitable for use with all Starlock, Starlock Plus and Starlock Max power tools as well as common multi-tools. The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting …

Designed for cleaning and light sanding, Dremel EZ SpeedClic brushes are perfect for getting to those hard-to-reach areas. The built in polishing compound ensures the perfect finish every time. Features and Benefits Bristles include a built-in polishing compound Available in a range, to best suit your needs See below for product sizes and types Notes Shank diameter: 3.2 mm Working diameter: 25 mm Grit: 36 Width: 25 mm Maximum RPM: 15,000 1/min Length: 25 mm Height: 7 mm 2615S472JA Shank diameter: 3.2 mm Working diameter: 25 mm Grit: 120 Width: 25 mm Maximum RPM: 15,000 1/min Length: 25 mm Height: 7 mm 2615S473JA Shank diameter: 3.2 mm Working diameter: 25,0 mm Grit: 220 Width: 25 mm Maximum …

Saw blade for cutting soft sheet metal. This blade has 10 teeth per centimeter ensuring excellent cuts. Technical specifications: Length: 100mm Cutting depth: 3mm. Teeth per centimeter: 10 Blade width: 0.2mm. Blade depth:1.9mm.

Designed for cleaning and light sanding, Dremel EZ SpeedClic brushes are perfect for getting to those hard-to-reach areas. The built in polishing compound ensures the perfect finish every time. Features and Benefits Bristles include a built-in polishing compound Available in a range, to best suit your needs See below for product sizes and types Notes Shank diameter: 3.2 mm Working diameter: 25 mm Grit: 36 Width: 25 mm Maximum RPM: 15,000 1/min Length: 25 mm Height: 7 mm 2615S472JA Shank diameter: 3.2 mm Working diameter: 25 mm Grit: 120 Width: 25 mm Maximum RPM: 15,000 1/min Length: 25 mm Height: 7 mm 2615S473JA Shank diameter: 3.2 mm Working diameter: 25,0 mm Grit: 220 Width: 25 mm Maximum …

A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3

Straight Bits. General purpose routing or grooving. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 3.2mm. Working length: 1.0mm Accessory length: 36mm Usage: Straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

Saw blade for straight and large diameter curved cuts in wooden and plastic materials. This blade has 6 teeth per centimeter ensuring a good balance between speed and precision. Technical specifications: Length: 100mm Cutting depth: 18mm. Teeth per centimeter: 6 Blade width: 0.4mm. Blade depth:2.5mm.

Cutting & Sawing : The Starlock ATZ 52 SFC scraper provides reliable removal of soft residues. Sharp blade for effortless material scraping. Pliable HCS body is elastic and flexible, making it ideal for eliminating soft residues. Starlock Snap-In mounting system for fast blade removal and exchange within 3 seconds without having to touch the blade. Length - 38mm Width - 52mm Blade Material - HCS - Hig Carbon Steel

Designed for cleaning and light sanding, Dremel EZ SpeedClic brushes are perfect for getting to those hard-to-reach areas. The built in polishing compound ensures the perfect finish every time. Features and Benefits Bristles include a built-in polishing compound Available in a range, to best suit your needs See below for product sizes and types Notes Shank diameter: 3.2 mm Working diameter: 25 mm Grit: 36 Width: 25 mm Maximum RPM: 15,000 1/min Length: 25 mm Height: 7 mm 2615S472JA Shank diameter: 3.2 mm Working diameter: 25 mm Grit: 120 Width: 25 mm Maximum RPM: 15,000 1/min Length: 25 mm Height: 7 mm 2615S473JA Shank diameter: 3.2 mm Working diameter: 25,0 mm Grit: 220 Width: 25 mm Maximum …

Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. Technical specificatios: Shank diameter:3.2mm. Accessory length: 40mm Maximum speed: 25,000rpm. Recommended attachment: Shaping platform attachment ref.576

• Set includes soft brass, steel wire brushes and nylon brushes.• Crimped brushes with flat and pointed fill.• For cleaning, dusting, polishing and surface preparation in small confined areas.• Compatible with Sealey and most popular branded rotary tools.Set includes soft brass, steel wire brushes and nylon brushes. Crimped brushes with flat and pointed fill. For cleaning, dusting, polishing and surface preparation in small confined areas. Compatible with Sealey and most popular branded rotary tools.• Set includes soft brass, steel wire brushes and nylon brushes. • Crimped brushes with flat and pointed fill. • For cleaning, dusting, polishing and surface preparation in small confined areas. • Compa…

V-Groove Bit. For sign word and lettering. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 37mm Usage: V-groove. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231