Other for Construction

Handle For EP-Uni 90/230 Screed The special design of the handle enables the operator to use the weight of his body to exert pulling force in every position of the EP profile. Part No. 33750047 Standard delivery 1-2 working days

Probst GH Rubber Hammer For aligning the paving stones before they are permanently set. Light-weight (2,5 kg) and with a long handle, it is ergonomically easy to work with it in an upright position. With easily exchangeable, highly wear resistant replaceable rubber caps. The hammer remains vertical after use because of the rectangular shape of the rubber caps. Part No. 51800013 Standard Delivery: 1-2 Working Days

Lifting Hose Unit HE85 - weight lifted 85kg For use with the JUMBOMOBIL JM, JUMBO-BV, TRANSMOBIL TM, MULTIMOBIL MM, JUMBO Travelling Crane JWK or on any other crane carrier. For use with BE-Sprint-2 Operating Valve Unit Consists of: Transportation hook.Rotational Device and quick coupling, 2 inch.Lifting hose unit with protective fabric as well as a flange for fitting onto the operating valve unit. Specifications: Model: HE lifting Hose Unit Part No. 42100002 Diameter: 178mm Lifting Height: 1700mm Maximum Lifting Weight: 85kg Please call 01202 233221 for delivery

Manhole Cover Key A for SDH Manhole Cover Lifters Use with SDH Manhole Cover Lifters along with Spreader Bars Specifications Make: Probst Product Code: 44800019

Manhole Cover Key B for SDH Manhole Cover Lifters Use with SDH Manhole Cover Lifters along with Spreader Bars Specifications Make: Probst Product Code: 44800020

Manhole Cover Key C for SDH Manhole Cover Lifters Use with SDH Manhole Cover Lifters along with Spreader Bars Specifications Make: Probst Product Code: 44800075

Keys and Spreader Bars Set for SDH Manhole Cover Lifters Use with SDH Manhole Cover Lifters. Specifications Make: Probst Product Code: 44800018 Contents: Key A: 2 Key B: 2 Key C: 4 Small Spreader Bar: 1 Large Spreader Bar: 2

Large Spreader Bar for SDH Manhole Cover Lifters Use with SDH Manhole Cover Lifters along with Manhole Cover Keys Specifications Make: Probst Product Code: 44800018

Watch Video Probst MAL Marking and Measuring Tool An indispensable aid for the exact measuring and marking of lengths and angles for cutting paving stones. Measure and mark pavers in one go! Establish the length and cutting angle of the paver to be cut using the guide and lock into place using the eccentric lever. Remove the guide, place it on the paver and mark the cutting line.The stopper on the measuring and marking guide allows for an automatic gap of 5 mm. The measuring and marking guide is made completely of metal, making it suitable for professional use and it can be used to measure all available types of pavers and slabs. Part No. 51800026 Standard Delivery: 1-2 Working Days

Manual Boulder Grab H-FVZ-uni Manual boulder grab H-FVZ-uni for laying smaller bolders or similar which can be carried by two men. Equipped as standard with a ring-eyelet for additional use with hoisting devices and a quick and easy gripping range adjustment from 0 – 600 mm. The H-FVZ-uni grab used at substantial stone wall restoration. Shell limestones and sandstones in many different shapes and sizes with a weight from 50 up to 100 kg had tobe moved and installed. Specifications Code : H-FVZ-uni Man code : 53200086 Gripping Gange W mm (in) : 0-600 (0-23) Dead weight Kg ( lbs) : 18 (40) Standard Delivery: 1-2 Working Days

Probst PZ / SZ Extractor Spring Steel Blade for either the PZ Slab Extractor or the SZ Paving Extractor. Part No. 41800001 Durable galvanized surface. Two Blades are required for the SZ Paving Extractor. Four Blades are required for the PZ Slab Extractor. Standard Delivery: 1-2 Working Days *Sold as singles*

Blade for Probst RE Alignment Bar, aligning paving stones before they are permanently set.Spring steel blade for driving into the hinge joints. Durable galvanized surface. *Sold as singles* Delivery 1-2 working days

The Paver Lifter SAH is the quick brother of the Block Extractor SZ. Do you need to lift pavers out of an uncompacted pavement? For example, if pavers with other colours for marking parking bays have to be installed instead, or if damaged pavers have to be exchanged before compacting. With the SAH this can be done quickly & efficiently in a relaxed body position. The profiled spring steel blades ensure that the pavers are gripped firmly & safely. Standard Delivery: 1-2 Working Days Part No. 51800050

Set of concrete screws, 6 x 80/SW 13 (100 pieces) For SZH Man Code: 41800239 Quantity: 100

Permanent Lifting Magnet for use with the SDH-LIGHT Mechanical Manhole Cover Lifter Permanent lifting magnet with slot for lifting cast steel and cast iron manhole covers. Specifications Make: Probst Product Code: 44800065 Weight: 11kg (24.2lbs)

Mechanical Manhole Cover Lifter Small and light mechanical manhole cover lifter for lifting manhole covers up to diameter Ø800mm. The manhole cover is lifted by tilting the SDH with the handle. Optimal lifting position adjustable by chain. Can be combined with spreader bars for lifting split covers. The crosspiece of the SDH-LIGHT can be pushed forward and back by approximately 120mm. Optionally available is the SDH-LIGHT-LHM-400 permanent lifting magnet with slot for lifting cast steel and cast iron manhole covers. Keys and spreader bars also have to be ordered separately. Specifications Make: Probst Product Code: 54800010 Hook Centres (min./max.): 100mm/740mm (4"/29") Pulling Force: …

Permanent Lifting Magnet for use with the SDH-M-10 Mechanical Manhole Cover Lifter Permanent lifting magnet with slot on SDH-M-10 for lifting cast steel and cast iron manhole covers. Specifications Make: Probst Product Code: 44800055 Weight: 11kg (24.2lbs)

Watch Video Vacuum Lifting Device SH-1000-MINI-B For efficient and safe handling and laying of heavy loads up to 1,000 kg, such as granite slabs, dense concrete elements, marble slabs, kerb stones, steps, pipes etc. Engine: integral petrol engine Generation of suction through powerful vacuum pump 12 cbm/h, powered by an integral petrol engine Can be hooked in to any carrier or laying machine VM by means of load hook, chain, hoisting cable or similar All-purpose lifting device Huge ease of work Enormous benefit in economization Ingenious technology down to the smallest detail Different suction plates can be attached to the SH within seconds for varying kinds of applications, slab dimensions …

Paving Block Extractor PZ An essential tool for any contractor who lays paving blocks or carries out repairs to paved surfaces. Adjustable to fit any size and shape of paver. The spring steel blades can be driven into the joints of existing pavements without problems. The gripping width can be adjusted without tools. Easily exchangeable, high quality profiled spring steel blades. Specifications Part No. 53200006 Galvanised finish Gripping Range* W mm (in): 200 - 610 (7¾ - 24'') Weight 4kg Standard Delivery: 1-2 Working Days

Small Spreader Bar for SDH Manhole Cover Lifters Use with SDH Manhole Cover Lifters along with Manhole Cover Keys Specifications Make: Probst Product Code: 44800008

Suction Plate For SM-400 Vacuum Lifting Device 400Kg Suction plate 750 x 260 mm with special seal system, exchangeable within secondswithout the use of glue or tools. No damage to the seal when setting on sharp edges for long time (no “supports“ necessary). Specifictions :- Code : SM-SPS-400 Dimensions approx: 750 x 260 mm (291/2” x 101/4”) Suction plate, carrying approx : 400 kg (880 lbs) ( Heavy Loads ) Part No: 42720002

Probst Spare Wheel for AL33 Block Cutter ( Each ) Part No. 218200001

Probst Spare Wheel for AL43 / AL65 Block Cutter ( Each ) Specifications: Part No. 21820003 Diameter: 160mm Width: 40mm Hole Diameter: 20mm

Block Extractor Hammer SZH With the new SZH block extractor hammer, blocks can be removed amazingly easily with no damage whatsoever to the neighbouring blocks! Particularly with very high-quality paving blocks and slabs, it can happen after vibration that individual blocks with minor damage have to be replaced. If conventional block extractors are used, with blades that grip into the joint, damage to the neighbouring blocks can occur. The defective block is drilled centrally with the battery-powered hammer drill. The concrete screw is screwed in with the battery screwdriver until the head still protrudes by approx. 10 – 15 mm. The SZH grips under the screw head. The impact weight is …