Hi-Fi Racks & Mounts Bose

Speaker Mount / Suitable for Manufacturer Sonos / Suitable for Model Soundbar 500

Bose S1 Pro+ XLR 9 m Black

Bose WMB-MA12/MA12EX bi-pivot bracket

WMB-MA12/MA12EX Bi-Pivot Bracket Black
Wall bracket offers pitch and yaw adjustment for MA12 and MA12EX loudspeakers. For indoor/outdoor use

WMB2-MA12/MA12EX Pitch Lock Upper Bracket White
Wall Bracket provides 0 – 10? of positive pitch retention for stacked MA12 and MA12EX arrays. Load rated for triple-stacks. This bracket is used along with the WB-MA12/MA12EX pitch only or WMB-MA12/MA12EX bi-pivot brackets. For indoor/outdoor use.

WMB2-MA12/MA12EX Pitch Lock Upper Bracket Black
Wall Bracket provides 0 – 10? of positive pitch retention for stacked MA12 and MA12EX arrays. Load rated for triple-stacks. This bracket is used along with the WB-MA12/MA12EX pitch only or WMB-MA12/MA12EX bi-pivot brackets. For indoor/outdoor use.

The RMUBRKT1/WBPWR-50 are pan-and-tilt brackets that attach to the rear panel threaded inserts of all RoomMatch Utility loudspeakers F1 Model 812 Active and Passive loudspeakers as well as the Panaray 402 Series IV. These brackets allow both pitch and yaw adjustments to enable flexible mounting options. WBPWR-50 is outdoor rated for use with outdoor installations of the Panaray 402 Series IV loudspeaker only. Indoor installations of Panaray 402 Series IV can use either bracket.

RMUBRKT1/WBPWR-50 fit the 4x M8 threaded inserts (127 x 70 mm) on the rear panel of the F1 Model 812 Panaray 402 Series IV RMU208 RMU206 and RMU108 models as well as the 2x M8 threaded inserts (75 mm spacing) on the …

A pan-and-tilt bracket that allows both pitch and yaw adjustment. The bracket fits the 4x M8 threaded inserts (127 x 70 mm) on the rear panel of the F1 Model 812 Panaray 402 Series IV RMU208 RMU206 and RMU108 models as well as the 2x M8 threaded inserts (75 mm spacing) on the rear panel of the RMU105 model.

For stacking two or more MA12 loudspeakers. For indoor use.

For stacking two or more MA12 loudspeakers. For indoor use.

Wall bracket offers 0 10 of pitch adjustment for MA12 and MA12EX loudspeakers. For indoor and outdoor use.

Wall bracket offers 0 10 of pitch adjustment for MA12 and MA12EX loudspeakers. For indoor and outdoor use.

Sub1/Sub2 Adjustable Speaker Pole
This speaker pole allows you to mount your Bose S1 Pro PA or other compatible system above your Bose Sub1 or Sub2 powered bass module. Just lay your Sub1 or Sub2 on its side and you’ll find an integrated M20-threaded pole mount. Sub1 and Sub2 (sold separately) combine with virtually any portable PA to deliver powerful bass from a unique RaceTrack driver design that gives your songs full impact and brings any event to life with bold bass.

FEATURES
• Designed for use with Bose Sub1 or Sub2 powered bass modules
• Mount Bose S1 Pro portable PA or other loudspeakers above Sub1 or Sub2
• Telescoping capability with locking pin for extension …

DesignMax Pan & Tilt Bracket Small White
A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM3SE surface-mount loudspeaker. The DMSBRKT bracket can be installed on a wall or ceiling. The DMSBRKT is for indoor use only. Includes installation hex key tool horizontal adapter plate and cosmetic cover. Compatible with FreeSpace FS2SE surface mount loudspeakers.
- Features
- Single/ Pair Single

DesignMax Pan & Tilt Bracket Small Black
A pan-and-tilt bracket that allows both pitch and yaw adjustment when the loudspeaker is mounted in either horizontal or vertical speaker orientation. The bracket fits the 2x M6 threaded inserts on the rear of the DesignMax DM3SE surface-mount loudspeaker. The DMSBRKT bracket can be installed on a wall or ceiling. The DMSBRKT is for indoor use only. Includes installation hex key tool horizontal adapter plate and cosmetic cover. Compatible with FreeSpace FS2SE surface mount loudspeakers.
- Features
- Single/ Pair Single

WBPWR-50B Outdoor Pan and Tilt Bracket
A pan-and-tilt bracket that allows both pitch and yaw adjustment. The bracket fits the 4x M8 threaded inserts (127 x 70 mm) on the rear panel of the F1 Model 812 DesignMax DM3SE DM5SE DM6SE DM8S and the AMM108.
- Features
- Single/ Pair Single