Engine Oils Laser Tools

12 x stepped adaptors for pipe sizes: 31 - 38mm, 46 - 51mm, 55 - 60mm, 65 - 70mm, 75 - 80mm, 85 - 90mm. Pressure gauge with shut off valve & regulator to help prevent over pressurisation. Use to pressure test turbo pipes, intercoolers & cooling sytems pipes & radiators when looking for leaks. Use with workshop comnpressed air. Always pre set the regulator to low before use. Suitable for cars, LCV, HGV & marine systems.

These tools expand into the good threads at the base of the spark plug hole and cleans and restores the threads which are damaged and are usually at the top as they are reversed out. Internal thread restorers 260mm long. Sizes 12mm and 14mm. Consumable items. Ideal for deep seated spark plugs. Time saver.

Quick adaptor for filling or purging radiators on Volvo trucks.Provides a quick and clean method of fluid transfer and prevents unwanted spillages.Knurled connector for ease of use.Equivalent to OEM 9996049.Part of the Laser HGV range of tools.

Part of the new truck range these Oil Filter Pliers range from 95mm to 178mm Range from 95mm to 178mmSoft grip handlesManufactured from forged medium carbon steelSpring loaded Adjustable

A heavy duty, 1/2"D double chain oil filter wrench designed to fit a wide range of filter sizes from 60 to 170mm diameter. The strong, double chain offers excellent grip, even on oily surfaces and is slim enough to fit round filters, pipes and caps located in awkward areas. The 1/2"D wrench head adjuster is driven by a ratchet or power bar, ideal for providing the extra leverage needed to remove stubborn oil filters.Adjustment range: 60 - 170mm.1/2" Drive. For use with 1/2"D ratchet or power bar.Double width chain for strength.For use with 1/2"D ratchet.Robust satin finish carbon steel body for durability.

Ideal for sealing off injector ports on the rail one by one to diagnose fuel system pressure loss. Internal thread and Sealing Cones: Sizes 6qty M12 x 1.5mm & 6qty M14 x 1.5mm. Fits most common rail injection rail sizes. Essential kit for diesel fuel system high pressure diagnostics. Ideal to ensure dirt is kept out of open fuel rails.

Three ignition coil pullers for use on Volkswagen & Audi vehicles fitted with direct ignition engines. Applications include: VW Beetle, Bora, Caddy, Eos, Golf, Lupo, Passat, Phaeton, Polo, Sharan, Touareg, Touran, Transporter T4 & T5; Audi A3, A6. Equivalent to OEM T10166, T10095A, T10094A, T40039.A special tool used for removing pencil-type ignition coil on 4-cyl direct injection Generation 3 VAG petrol engines. Applications include: VW Golf; Audi A3; Seat Leon, Octavia. Equivalent to OEM T10530.Two ignition pullers specifically designed for two handed removal of the ignition coil on most GM vehicles. Applications include: Agila-A, Astra-F, G, H, J, Calibra, Combo, Corsa-B, C, D; Frontera-A,…

Heavy duty hose clip pliers suitable for fitting medium sized closed and open ear-type pipe O-clips. The retraction bar has two settings which allow for pre-tensioning and definite clamping, with the mechanical lock preventing damage to the collar when tightening. O-type hose clips are used widely on cooling, fuel and air lines, together with other low to medium pressure hydraulic applications.For fitting 'O' style, Oetiker, single & twin ear hose clips.Length: 270mm.The design allows minimum clamping effort & the mechanical lock prevents damage to the collar.PVC dipped handles for comfort.Suitable for use with Connect twin ear hose clip range, please see Part Nos. 30815 to 30821.

Many common rail diesel engine faults can be traced to fuel feed pressure or volume issues but electronic on board diagnosis cannot always pinpoint fuel feed problem accurately giving confusing turbo pressure or high fuel pressure circuit related fault codes. When used correctly the 7849 can quickly diagnose a fuel feed problem. The 7849 has been designed to allow quick and easy diagnostic pressure tests to be carried out on the low pressure fuel side of a common rail diesel system with the ignition on or engine running. This kit can connect in to any low pressure fuel system that uses 9.89mm quick connectors. It can also plug straight into existing Laser fuel bleed adaptor kits including 5262,…

For refilling radiators with coolant without introducing air pockets. Complete with adaptors for most modern cars and instructions. Packed in a blow mould case.For refilling radiators with coolant mix without introducing air pockets.Complete with adaptors for most modern cars.Adaptor sizes: 35mm | 39mm | 44mm | 48mm diameter.Adaptors expand by approximately 4mm.Packaged in a blow mould case with instructions.

Flushing of cooling systems using workshop air and water. Hand held with five pipe size connections: 19mm, 29mm, 32mm, 36.5mm & 40mm. Trigger action with locking clip. Standard air line and water hose fitting. Helps remove contaminated coolant after head gasket replacement.

SCR Selective Catalytic Reduction (Urea) system pressure test kit. 2 x 300mm clear braided connection pipes with parallel and 90 degree 6.3mm snap connectors to allow connection to the SCR system in restricted areas and view the fluid colour etc. Use in accordance with OEM vehicle data and instructions for SCR system testing. Designed to be used with OEM diagnostic software and protocols. Note: always wash the gauge and pipe assembly after use in clear water to prevent Urea crystal build up.