Other Hand Tools Bailey

Universal Drop Scraper which glides over small obstructions and drops into a vertical scraping position to allow offending material to be dragged back towards the operator. Size 4 in.

The Bailey 1771 Lockfast Drop Scraper, 100mm/4in, is perfectly made to glide over small obstructions and it drops into a vertical scraping position to allow offending material to be dragged back towards the operator, to make to job much tidier.

These Bailey 1985 hand bellows are used for drain testing, by pumping air into a sealed pipe and U gauge. The pressure will return to zero quickly if there is a leak in the section.Additional Information:• Type: Hand Bellows

This Bailey 1988 U gauge tube must be connected to the nipple via a Y piece, U-gauge, and hand bellows for the successful completion of air tests. Specification: Length: 1 metre.Additional Information:• Type: Tubing• Size: 1m

This Bailey 1989 Y piece is the link between the hand bellows, U gauge, and test nipple via the rubber tubing.Additional Information:• Type: Y-Piece

For professional people who require their tools to be at hand on a regular basis, this purpose designed set comes complete with a heavy-duty blue waterproof Bailey carry bag and supplied with adjustable shoulder straps. The compact nature of this set allows them to be easily stored in the works, shed, garage or van. This Universal Drain Rod set includes 30 feet of the Bailey Blue Rods® with brass fittings. The quality, reliability and strength of this equipment ensures that the toughest jobs can be tackled - an essential product for the builder, plumber, chimney sweep or handyman. Contains: 10 x Blue Rods 3ft x 3/4in 1 x Plunger 4in1 x Drop Scraper 4in1 x Double Worm ScrewAdditional Information:• …

This Bailey 1986 Drain testing U Air Gauge is suitable for use in testing drains and sewers. Specification: Size: 100mm (4in).Additional Information:• Type: U-Gauge

Bailey 1470 Universal 3/4in Drain Rod Set with blue polypropylene drain rods. Rods fitted with this type of joint should only be rotated in a clockwise direction. Contains the following: 10 x Blue Rods 3ft x 3/4in 2 x Straps 12in1 x Plunger 4in1 x Double Worm Screw 2inAdditional Information:• Type: Universal• Size: 2

This BAI4074 drain test kit is an off-the-shelf solution for the completion of air tests to 4in (100mm) water gauge pressure on drains and pipes. Contains: 1 x 4in U-Gauge1 x 9ft Tube1 x Hand Bellows1 x Y-Piece1 x 1/2in Test Nipple Cap1 x 1in Test Nipple CapAdditional Information:• Type: Test Kit

Lockfast blue polypropylene Drain Rod Set. Contents: 10 x Blue Rods 3ft x 3/4in2 x Straps 12in1 x Plunger 4in1 x Double Worm Screw 2in1 x Clearing Wheel1 x Drop Scraper 4inAdditional Information:• Type: Lockfast• Size: 4

Inflatable rubber bladder with canvas protective case which can be used for blocking off pipes during maintenance and similar applications.Supplied with 1/4 in brass tap and 1.8 metres (6 ft) of tubing.Size. 100mm (4 in)Max inflation pressure 0.68 bar / 10 psiAdditional Information:• Type: Air Bag• Size: 100mm

Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Centre locking drain test plugs with steel plates, brass wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers. Size: 100mm (4in).Additional Information:• Type: Drain Test Plug• Size: 100mm

Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Size 200mm (8in)Additional Information:• Type: Drain Test Plug• Size: 200mm

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 100mm (4 in)Additional Information:• Type: Drain Test Plug• Size: 100mm

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 150mm (6 in)Additional Information:• Type: Drain Test Plug• Size: 150mm

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers.Size 75mm (3 in)Additional Information:• Type: Drain Test Plug• Size: 75mm

The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI1992 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: BluePart No: 1992Dilution Rates Litres: 12-14,000Additional Information:• Type: Tracing Dye• Dye/Smoke Colour: …

The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3589 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: GreenPart No: 3589Dilution Rates Litres: 15-20,000Additional Information:• Type: Tracing Dye• Dye/Smoke Colour: …

The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3590 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: RedPart No: 3590Dilution Rates Litres: 12-15,000Additional Information:• Type: Tracing Dye• Dye/Smoke Colour: …

The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, for examle one 8oz jar will provide enough dye for approximately 15,000 litres/3,300 gallons of water. However please note that dirty water will require a greater concentration of dye.The Baileys BAI3591 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: YellowPart No: 3591Dilution Rates Litres: 10-12,000Additional Information:• Type: Tracing Dye• Dye/Smoke Colour: …

This Bailey 1779 Lockfast Double Worm Screw pierces blockages such as paper or rags, and the obstruction is drawn back to clear the pipe. Specifications: Size: 2in.Type: Lockfast.Additional Information:• Type: Double Worm Screw• Size: 50mm (2in)

The Bailey 1771 Lockfast Drop Scraper, 100mm/4in, is perfectly made to glide over small obstructions and it drops into a vertical scraping position to allow offending material to be dragged back towards the operator, to make to job much tidier.Size 150mm (6 in).Additional Information:• Type: Drop Scraper• Size: 150mm (6in)

Lockfast plunger builds up pressure of water which forces the obstruction clear.One-piece moulded. For use with the lockfast range of rods & accessoriesSize 100mm (4 in).Additional Information:• Type: Plunger• Size: 100mm (4in)

Lockfast plunger builds up pressure of water which forces the obstruction clear.One-piece moulded. For use with the lockfast range of rods & accessoriesSize 150mm (6in).Additional Information:• Type: Plunger• Size: 150mm (6in)