Other Hand Tools Hultafors

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/20 Steel Wrecking Bar 500mm (20in)Additional Information:• Type: Wrecking Bar• Length: 500mm

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/25 Steel Wrecking Bar 625mm (25in)Additional Information:• Type: Wrecking Bar• Length: 625mm

The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails. 1 x Hultafors 109/28 Steel Wrecking Bar 710mm (28in)

1 x Hultafors 109/36 Steel Wrecking Bar 900mm (36in)

The Hultafors 109 TD Wrecking Bar is made from hardened, high quality steel. Wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. The claw and chisel are optimised for pulling out nails.Additional Information:• Type: Wrecking Bar• Length: 640mm

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration. 1 x Hultafors 207 Steel Pinch Bar 500mm (20in)

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration. 1 x Hultafors 207 Steel Pinch Bar 600mm (24in)

The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle. It's articulated claw is adjustable to nine different positions. With wide, ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks. The claw is optimized for pulling out nails. The curved section at the chisel makes space for the hand and minimizes the risk of crushing damage.Additional Information:• Type: Wrecking Bar• Length: 640mm

Chalk line with a cast powder-coated aluminium body with a sliding filler cover. The cord is braided cotton/polyester, the cotton absorbs the chalk while the polyester provides the strength and the braid ensures that the cord never tangles. The cord is 1 mm in diameter and has a rupture limit of 16 Kg. 30 m/100 ft. Capacity: 80 g of chalk.

The Hultafors CLP30 Chalk Line has a 30m line, metal crank and quick gear function 31. The housing is made from ABS plastic, has a big opening for refilling and a cap with bayonet joint and contains up to 100g of chalk. The line is braided cotton/polyester with high absorbing chalk capacity and considerable increased numbers of distinct lines - up to 10 lines. The crank is fitted with an ergonomic release button and knob. It can be locked in the open and closed position. The cap is secured by the hook, no line is left hanging loose. There is also a secure strap function.

Suitable for measuring angles or transferring angles from a point of measurement to a work-piece. Made of anodised aluminium for improved durability against corrosion. Alpha x read on the left side of the scale, Beta x on the right and can also be used to read angles between 20° and 160°.Additional Information:• Type: Folding Square• Size: 300mm

The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC12 Scandinavian Butt Chisel. Blade: 12mm.Overall Length: 232mm.Additional Information:• Blade Width: 12mm

Hultafors EDC20 Scandinavian Butt Chisel. Blade: 20mm.Overall Length: 232mm.

The Hultafors F430 Wrecking Bar is manufactured from aluminium with a cone-shaped point. Used when aligning flanges with bolt holes and for bending copper pipes with care. The bar is inserted in the pipe which is then heated up and bent to shape. This prevents damage to the actual pipe end. Very common when fitting car body components. Aluminium is easier and more comfortable to work with, does not rust and can handle the cold better.

The Hultafors Deep-Hole Marker is ideal for marking in hard-to-reach places and narrow holes. Permanent ink for use on most materials and surfaces. Available in red or black.1 x Hultafors Ink Deep-Hole Marker BlackAdditional Information:• Colour: Black• Pack Qty.: 1

The Hultafors Deep-Hole Marker is ideal for marking in hard-to-reach places and narrow holes. Permanent ink for use on most materials and surfaces. Available in red or black.1 x Hultafors Deep-Hole Marker RedAdditional Information:• Colour: Red• Pack Qty.: 1

The Hultafors Dry-Marker has a grip-friendly and ergonomic design. Supplied in a holster with a built-in sharpener for clear markings. It's easy to remove from the holster, so you don't have to let go of what you're working with. The shape of the holster ensures that the pen stays in place even when you move. The pen can be used whilst in the holster or removed completely depending on your preference. There is a hole in the bottom of the holster, this allows dirt and moisture to fall away from the pen, providing a longer life. The lead is easy to change and refills are available.Additional Information:• Colour: Graphite• Pack Qty.: 1

Hultafors Dry-Marker Refills supplied in a smart container with 10 leads for marking on all types of surfaces. The container protects the leads during transport and only ejects one lead at a time. Clips for easy storage in a pocket or bag. These refills fit the Hultafors Dry-Marker. Available options: either graphite only or graphite, red and yellow chalks.1 x Pack of 10 Hultafors Dry-Marker Refills containing: 4 x Graphite Leads3 x Red Chalk Leads3 x Yellow Chalk LeadsAdditional Information:• Colour: Assorted• Pack Qty.: 10

Hultafors Dry-Marker Refills supplied in a smart container with 10 leads for marking on all types of surfaces. The container protects the leads during transport and only ejects one lead at a time. Clips for easy storage in a pocket or bag. These refills fit the Hultafors Dry-Marker. Available options: either graphite only or graphite, red and yellow chalks.1 x Pack of 10 Hultafors Dry-Marker Refills containing: 10 x Graphite LeadsAdditional Information:• Colour: Graphite• Pack Qty.: 10

The Hultafors IG22 Incannel Carving Gouge is a curved chisel, sharpened on the inside, giving a perfect 22mm diameter in one stroke. Sharp, reliable and always at hand when installing lock cases and hinges in wooden doors. The gouge features a high-quality Japanese steel blade, rust protected by Electrophoretic deposition (EPD). Heavy-duty handle designed to withstand repeated hammer blows. Supplied in a smart holster for easy access at all times. Specifications: Diameter: 22mm.Overall Length: 232mm.Additional Information:• Type: Curved• Size: 22.0mm

The Hultafors OGC r8 Outcannel Carving Gouge is a curved chisel, sharpened on the outside, giving a perfect 8mm radius in one stroke. Sharp, reliable and always at hand, perfect for making cable ditches. The gouge features a high-quality Japanese steel blade with a heavy-duty handle designed to withstand repeated hammer blows. Supplied in a smart holster for easy access at all times. Specifications: Radius: 8mm.Overall Length: 232mm.Additional Information:• Type: Curved• Size: 8.0mm

The Hultafors 108 Mini Wrecking Bar can be used to pull small nails, strips of wood, or open cans. It has three different functions for pulling out nails and the thin contact surfaces make it easy to use in narrow spaces. Length: 190mm (7.1/2in).Weight: 77g.Additional Information:• Type: Wrecking Bar• Length: 190mm