Timberk Warmth Booster TCH A1N 2000 2 kW

ceiling heat

Ceiling infrared (IR) heater Timberk Warmth Booster TCH A1N 2000 is designed for fixed installation in residential, commercial and utility rooms up to 20 m2. At the same time, the degree of protection IP24 allows the operation of the device in wet rooms. Installing the device under the ceiling at a height of up to 3.5 m removes all restrictions on its placement: after all, the height of the room clearly determines the distance to the heating objects, low convection does not raise heated dust, does not pollute the air and does not burn oxygen, and there are no barriers. The reinforced case of the device with overall dimensions of 126.5x28.3x6.4 cm is made of thick sheet metal, which increased the weight of the structure to 10.1 kg. Ease of installation (brackets included) does not require disassembly of the housing to connect the heater, and the ceiling mount is located away from the hot working surface of the emitters.

Enlarged radiation surface

Due to the special geometry of the surface with a “jagged” relief, the micathermic plates, which receive heat from 2 kW heaters, have an increased radiation area. And an efficient reflector with a reflectance of over 90% carries the generated heat to its destination with almost no loss. As add-ons, which are purchased separately, it is possible to connect the TMS 09.CH/TMS 11.CH room thermostat, as well as the TMS 08.CH remote control, to the device. This upgrade makes the adjustment of settings more comfortable, allows you to control 2 levels of heating power and set the time to turn off the device using a timer (13 hours). The infrared heater is provided with a one-year service warranty from the manufacturer.