AEG BOF18BL2-0 (4935479163)
Diamond Core Bits & Milling Cutters1895
 |
3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. 8mm shank for medium or heavy duty more→routers only. Specifications • Shank Diameter: 8 mm • Dia Metric: 19.3 • Cut Length Metric: 38.1 • Overall Length Metric: 89 • Bearing Dia Metric: 16 • Angle: 3
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 4/2 x 1/2 TCT Two Flute Cutter has the following specification: D: 16mm (5/8in)C: 19mmOL: 60mmShank Diameter: 1/2inPTDTRE4212
 |
Trend Craft Pro 1/4in shank bearing guided round over router cutter - 12.7mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all tim more→ber and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 12.7mm radius will cut full bullnose profile for detailing work on 1in/25mm stock. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: …
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 17.5 • Cut Leng more→th Metric: 8 • Overall Length Metric: 52.7 • Angle: 45
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 32 • Overall Length Metric: 73
 |
Profilers with shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge cutting or grooving. A 3 mm approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 15.9 mmC = 19.1 mmPTDTRE469214T
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: 11 • Cut Length more→Metric: 5 • Overall Length Metric: 52.5 • Angle: 45
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 27 • Dia Imperial: 1 1/16 • Cut Length Metric: 32 • Overall Length Metric: 72
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
