AEG WS 10-125 SK (4935451303)
Cutting Discs207
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel
 |
Diamond Cutter / Concrete / Quantity 1 Piece / Disc Diameter 125 mm / Disc Thickness 2 mm / Bore 22.23 mm
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Reliable Cuts - The Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials. Its optimised diamond matrix delivers solid results thanks to the disc's high- more→quality standards, which are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of abrasive materials. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • For All Types of Abrasive Materials • Optimised diamond matrix delivers solid results Specifications Diameter: 125mm Bore diameter: 22.23mm Bore size: 22.23mm Cutting width: 1,6mm Segment height: 10mm
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
Wire & Cup Brushes302
 |
Price from £13.44 up to £18.15
Compare prices6→Compare prices and buy Draper Twist Knot Wire Cup Brush, 100mm, M14
Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.
 |
Price from £7.49
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 100mm M10 Thread WBTC100MC
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £13.95
Compare prices4→Compare prices and buy Bosch X Lock Crimped Brass Wire Cup Brush 75mm X-Lock c
Extra-Fine Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire, Brass-Coated provides an extra-fine surface finish. Fitted with brass-coated crimped wire for light-to-medium
 |
Price from £27.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Knotted Wire Wheel 115mm X-Lock 472.25X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Bevel Brush 115mm Non Spark
 |
Price from £12.19 up to £13.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 25mm 6mm Shank STA36025
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 25mm • Pack Quantity: 1
 |
Price from £13.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 125mm M14 Thread WBC125
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Wi
 |
Price from £16.49 up to £20.95
Compare prices7→Compare prices and buy Bosch Professional X-lock Heavy Inox 75x0.5x125 Mm Brush Cup 2608620729
X-Lock Heavy For Inox Cup Brush, Knotted WireFeatures:- It Is Suitable For Use With X-Lock Angle Grinders.- X-Lock Heavy For Inox Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance- K more→notted Wire For Heavy-Duty Cleaning Applications On Medium-To-Large Surfaces- Ideal For Removing Heavy Rust, Paint Or Varnish On Stainless Steel, Aluminium And Non-Ferrous Metal Surfaces- Click It On With X-Lock – The Fastest Accessory-Chang
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
