Alteco FR 2200 (20361)
Diamond Core Bits & Milling Cutters2729
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Imperial: 7/64 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4 • Sawbore: 3.2 • Sawbore Imperial: 1/8
 |
The Dormer S904 Carbide MC-X Plain Shank Multi Flute End Mill is designed for precise and efficient machining tasks. Featuring a regular length and 4 flutes, this solid carbide end mill is engineered more→for shoulder milling applications in free-machining, plain carbon, and alloy steels, as well as malleable, ductile, and compacted graphite cast iron, copper, and copper alloys. The bright finish enhances chip flow, while the 30° helix and 12° rake angle deliver smooth cutting performance. Chamfered corner edges provide added durability and reduce the risk of chipping, making it ideal for demanding milling tasks. Features and Benefits • Bright (uncoated) • Hard Material (Solid Carbide) &b…
 |
They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 3.96 • Overall Length Metric: 75
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. Specific more→ations • Shank Diameter: 8 mm • Dia Metric: 19.4 • Dia Imperial: 3/4 • Cut Length Metric: 9.2 • Overall Length Metric: 56 • Angle: 45
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 14.3 • Dia Imperial: 9/16 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 68.5
 |
With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metr more→ic: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 63 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 4/8 x 1/2 TCT Two Flute Cutter has the following specification: D: 25.4mm (1in)C: 25mmOL: 68mmShank Diameter: 1/2inPTDTRE4812
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
