AMB 1050 FME-1 (06082206)
Diamond Core Bits & Milling Cutters1651
 |
For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. Specifications • Shank Diameter: 1/4 • Dia Metric: 36.7 & more→bull; Cut Length Metric: 9 • Bearing Dia Metric: 9.5 • Type or Grade: Profile/scribe set • Radius 1 Metric: 9 • Pack Qty: 2 Piece
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Downcut to prevent breakout on veneer. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: 79 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.89 • Dia Imp more→erial: 1/2 • Cut Length Metric: 10.3 • Overall Length Metric: 60 • Angle: 60
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 13mm • Shank Diameter: 12mm • Length of Cut: 50mm • Overall Length: 95mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 23 • Dia Imperial: 29/32 • Cut Length Metric: 19 • Overall Length Metric: 57
 |
The HSS Countersink Bit, Cylindrical Shank performs smooth countersinking for screws and deburring of holes in soft materials. The ground countersink is made of HSS (high-speed steel) that offers an o more→ptimum surface quality for even work in pliable surfaces. Excellent results in soft materials are made possible by five 90-degree cutting edges that continuously work free of chattering and without leaving burrs. It is suitable for use on wood, plastics and non-ferrous metals and has a cylindrical shank system. Cylindrical shank compatible with three-jaw drill chucks. Features and Benefits • Smooth Countersinking in Soft Materials Specifications Diameter: 16,0mm Step height: M 8 Total length: …
 |
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. A 2mm maximum overlap should be left before trimming. Specifications &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 12.7 • Angle: 90
 |
For deep mortising & grooving giving good chip clearance. Will plunge to a depth of 70mm in a number of passes. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive material more→s to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 12 mm • Dia Metric: 16 • Cut Length Metric: 50 • Overall Length Metric: 101
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
