AMB 1050 FME-1 DI (06081054)
Diamond Core Bits & Milling Cutters1871
 |
Drilling and Countersinking - The Arbour-mounted Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, it makes all three applications achiev more→able at once, obtaining proficient results. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multifunctional bit, made of tool steel, has a countersink angle of 90 degrees, five cutting edges, and can also be used as a depth stop. It comes with a hexagon pin key; brad point drill bit is not included. Features and Benefits • Efficient One-step Drilling and Countersinking …
 |
They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds more→only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 3.96 • Overall Length Metric: 75
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 19.0mm • Shank Diameter: 10mm • Overall Length: 63mm • Capacity: 3.5mm - 19.0mm Features and Benefits &bull more→; Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 38.1 • Cut Length Metric: 31.7 • Overall Length Metric: 70 • Radius 1 Metric: 19.1
 |
For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive more→black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Overall Length Metric: 95
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Over more→all Length Metric: 59.5 • Radius 1 Metric: 1.6
 |
Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Lengt more→h Metric: 18 • Cut Length Imperial: 45/64 • Overall Length Metric: 77
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 32 • Overall Length Metric: 64
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
