AMB 1050 FME-P (06082701)
Diamond Core Bits & Milling Cutters2272
 |
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Specifications • Shank Diameter: 1/2 • D more→ia Metric: 63.5 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 25.4 • Radius 1 Imperial: 1
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 67.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 6 more→• Dia Imperial: 15/64 • Cut Length Metric: 16 • Overall Length Metric: 69
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/4 more→• Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
 |
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application more→allows. Neatly cuts grooves on doors or frames to accept a weatherseal. Groove can be positioned in bottom of a rebate. Specifications • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 2.8 • Overall Length Metric: 55.3 • Bearing Dia Metric: 20
 |
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications • Shank Diameter: 1/4 • Dia Metric: more→35 • Cut Length Metric: 16 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
 |
Trend Craft Pro 1/4in shank bearing guided slotting cutter - 31.8mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and more→timber based materials. The fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels. Slot dimension matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 …
 |
Trend Craft Pro 1/4in shank recessing cutter - 20mm width Two Flute Carbide tips. Specialist cutter to cut double rebates for fitting Tonk strip bookcase supports, for fast, efficient performance. C more→uts the wider top rebates for the strip and the lower clearance groove in a single pass for accurate professional appearance every time. 1/4in shank ideal for smaller routers for easy control using straight edges and template guides. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 …
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
