AMB 1050 FME-P DI (06081055)
Diamond Core Bits & Milling Cutters2333
 |
These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Dia Imper more→ial: 3/16 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 66 • Radius 1 Metric: 2.4 • Radius 1 Imperial: 3/32
 |
Roughing cutter which leaves an overhang of 3mm, for secondary final trimming. Life can be extended by varying height of cutter. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 &bu more→ll; Dia Imperial: 1/2 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 67 • Bearing Dia Metric: 19
 |
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications • Shank Diameter: 1/2 • Dia Metric: 38.1 • Dia Imperi more→al: 1 1/2 • Cut Length Metric: 16 • Overall Length Metric: 69 • Bearing Dia Metric: 38.1 • Bearing Dia Imperial: 1 1/2
 |
Ideal for softwoods where a fine finish is required, the upcut prevents burning in plunge cuts. Up-cut spiral tools will give a fine finish and have long shanks. Also suitable for non-ferous metals more→and are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Specifications • Shank Diameter: 8 mm • Dia Metric: 8 • Cut Length Metric: 19 • Overall Length Metric: 80 • Type or Grade: Up-cut
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 12.4mm • Shank Diameter: 8mm • Overall Length: 56mm • Capacity: 2.8mm - 12.4mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
 |
Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component. Specifications • Shank D more→iameter: 1/2 • Dia Metric: 53 • Dia2 Metric: 12.7 • Cut Length Metric: 35 • Overall Length Metric: 83.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 60
 |
Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Specially designed for the caravan building industry, used fo more→r cutting apertures in windows, doors & the floor pan. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 22.5 • Overall Length Metric: 123
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
